Displaying 4 results from an estimated 4 matches for "altserver".
Did you mean:
acmserver
2005 Feb 02
0
IAXy Configuration for Alternate Server
...address is private address space, I setup
the public IP address of my Asterisk server as the alternate. When
taking it to another location (NAT again behind a WRT54G), it doesn't
seem to work. Here's my current iaxprov.conf file that I downloaded to
said IAXy:
[default]
server=172.16.200.3
altserver=65.x.x.x
codec=ulaw
flags=register,heartbeat
tos=lowdelay
[iaxy1]
user=iaxy1
pass=xxxxxx
template=default
And the IAXY is online:
coke*CLI> iax2 show peers
Name/Username Host Mask Port Status
iaxy1 172.16.200.38 (D) 255.255.255.255 4569...
2006 Sep 12
1
openssh (OpenBSD) , bsdauth and tis authsrv
nuqneH,
I've tried using TIS authsrv authentication via bsd auth and found
it quite limited. The most important restriction it does not log
ip and fqdn of the remote peer, nor the application name, to
the authentication server. It does not matter much for TIS authsrv,
but since other applications do provide such information, our
authsrv version uses it for extra authentication restrictions.
2005 Sep 07
1
IAXy - no dailtone
...4
0c:
00 00 00 01
Provisioning is 60 bytes
Total packet is 74 bytes
Got response back from '192.168.1.90'
Here is my iaxy.conf:
;
; IAXY Provisioning description
;
;dhcp
ip: 192.168.1.90
netmask: 255.255.255.0
gateway: 192.168.1.125
codec: ulaw
;codec: adpcm
server: 192.168.1.199
;altserver: 192.168.0.2
user: iaxy
pass: password
register
;heartbeat
;debug
;
; Feature tuning (default is all enabled)
;
;disablecid
;disablecw
;disablecidcw
;disable3way
The IP addresses here are all correct.
Here's the relevant portion of iax.conf:
[iaxy]
type=friend
user=iaxy
host=dynamic
secret=...
2007 Mar 13
1
Digium S101i - Adapter DTMF works perfeclty
...working perfectly with Asterisk, much better than
Sipura 3K
Though, I think the Asterisk "iaxy" firmware is buggy, the unit is using
auto-update feature; so I have Asterisk 1.2.13 and iaxy firmware version
is: 23
When enable in provisioning for both options: "server" and "altserver"
initial connection goes through fine but there is some problems with
provisioning routine after.
I lose the connection frequently (during conversation, after, or when
phone is on hook) and the unit S101i will not initialize itself again,
usually the orange light stays "ON" (even...