Displaying 20 results from an estimated 41 matches for "altmbr".
Did you mean:
alter
2009 May 25
2
Err: "Missing OS" Using altMBR.bin
Hi, I'm trying to use the altmbr.bin that came with 3.80 on an ATA IDE
drive.
When I boot I get this error msg:
> Missing operating system.
>
> No bootable devices--strike F1 to retry boot, F2 for setup utility.
The first line is coming from syslinux, the final line is my BIOS
offering for me to retry.
=-=-=-=-=-=-=-=-...
2014 Jun 25
2
How is a isohybrid --partok image to be used ?
Hi,
i am trying to document the MBR selection by isohybrid option --partok.
I assume it is related to "altmbr.bin" as described in
http://www.syslinux.org/wiki/index.php/Mbr
But there i read
"altmbr.bin [...] boots from a partition with fixed number, see below."
The "see below" probably refers to
"The altmbr.bin (all 3 variants) is only 439 bytes long, -- one extra
byte shou...
2009 May 26
2
[How-To?] Using Syslinux AltMBR + TrueCrypt System Encryption (RFE: swap drive ID's)
Just achieved success using syslinux to multi-OS boot, including a WinXP
System (boot) partition that's been encrypted with TrueCrypt (TC).
You'll need syslinux version 3.81-pre13 or newer to get a working
altmbr.bin file. I used:
http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/syslinux-3.81-pre13.zip
Background:
I started with a 'normal' multi-OS boot setup as follows:
MBR - syslinux
hda1 - 24G - [0c] - FAT32 - WinXP (Encrypted via TrueCrypt)
hda2 - 53G - [0f] - E...
2012 Mar 21
1
altmbr.bin always boots the first partition
Hi,
altmbr.bin and its variants apparently always boot the first partition
(in Syslinux 4.05, but this issue seems older than that). The
following example uses parted 3.0:
----------
rm -f flat
mkdir mnt
truncate -s 20M flat
parted -s flat mklabel msdos mkpart primary fat32 1MiB 10485759B
mkpart primary ext2...
2015 Nov 19
1
[PATCH] Refactor checksize.pl
...le == "--help" or $file == "-h") {
> + $usage = <<"END_USAGE";
> +Usage: $0 file [maxsize]
> +If maxsize is not given it will be guessed based on filename:
> + - 440 bytes for mbr and gptmbr;
> + - 432 bytes for isohdp;
> + - 439 bytes for altmbr.
> +END_USAGE
> + die $usage;
> +}
>
> if (!defined($maxsize)) {
> # Defaults based on the filename
> if ($file =~ /^mbr[^0-9a-z]/) {
> - $maxsize = $padsize = 440;
> + $maxsize = 440;
> } elsif ($file =~ /^gptmbr[^0-9a-z]/) {
> - $maxsiz...
2014 Jun 26
0
How is a isohybrid --partok image to be used ?
On 06/25/2014 01:16 AM, Thomas Schmitt wrote:
> Hi,
>
> i am trying to document the MBR selection by isohybrid option --partok.
>
> I assume it is related to "altmbr.bin" as described in
> http://www.syslinux.org/wiki/index.php/Mbr
> But there i read
> "altmbr.bin [...] boots from a partition with fixed number, see below."
>
> The "see below" probably refers to
> "The altmbr.bin (all 3 variants) is only 439 bytes...
2015 Nov 19
3
[PATCH] Refactor checksize.pl
...+
+if (!defined($file) or $file == "--help" or $file == "-h") {
+ $usage = <<"END_USAGE";
+Usage: $0 file [maxsize]
+If maxsize is not given it will be guessed based on filename:
+ - 440 bytes for mbr and gptmbr;
+ - 432 bytes for isohdp;
+ - 439 bytes for altmbr.
+END_USAGE
+ die $usage;
+}
if (!defined($maxsize)) {
# Defaults based on the filename
if ($file =~ /^mbr[^0-9a-z]/) {
- $maxsize = $padsize = 440;
+ $maxsize = 440;
} elsif ($file =~ /^gptmbr[^0-9a-z]/) {
- $maxsize = $padsize = 440;
+ $maxsize = 440;
} elsif ($file =~ /...
2014 Jun 27
1
How is a isohybrid --partok image to be used ?
Hi,
H. Peter Anvin:
> It means that the .iso can be booted from a partition using any of the
> standard MBRs (not necessarily altmbr),
But the --partok MBRs (isohdpp*) stem from altmbr ?
If so: don't they need the partition number patched in ?
(If not: i have to rethink the link to article "Mbr" at
http://www.syslinux.org/wiki/index.php/Isohybrid#MBR_selection
)
> One of the main uses is for backup partit...
2009 May 29
2
Syslinux 3.81 released
...unfortunately means that the isohybrid handoff protocol
has changed, so the isohybrid utility must version-match
isolinux.bin.
* Drop support for ACPI 3 extended memory flags.
* Menu system: don't set the autocr flag on the serial
console.
* altmbr: fix handling of logical partitions.
* altmbr: cap at 439 bytes so the partition select byte isn't
part of the file.
Begin3
Title: syslinux
Version: 3.81
Entered-date: 2009-05-29
Description: SYSLINUX is a collection of boot loaders for the Linux...
2014 Jan 22
1
syslinux and btrfs-formatted dos/MBR partition
...f=MBRbackup.bin) and I installed the syslinux MBR. I
tried several ways:
- with the script provided by Arch: syslinux-install_update -i -a -m
- manual method with mbr.bin (first setting the boot flag on
/dev/sda3): dd if=/usr/lib/syslinux/bios/mbr.bin bs=440 count=1
of=/dev/sda
- manual method with altmbr.bin: printf '\x3' | cat
/usr/lib/syslinux/bios/altmbr.bin - | dd bs=440 count=1
iflag=fullblock conv=notrunc of=/dev/sda
No luck any way. Then I just restored the Microsoft MBR.
On 22/01/2014, Gene Cumm <gene.cumm at gmail.com> wrote:
> On Tue, Jan 21, 2014 at 7:42 AM, David de M...
2014 Jan 21
2
syslinux and btrfs-formatted dos/MBR partition
Hello Gene, thanks for your reply.
Yes BIOS mode. The config wants a menu, which loads fine under ext4
and not under btrfs. Under btrfs I have also tried to remove the
syslinux.cfg file altogether (which should trigger the boot: prompt if
I am not mistaken) and the result is the same: only the copyright line
appears and no prompt.
The three letter sequence is EDD.
The disk is 160GB, here is the
2012 Nov 05
0
Comments about documentation as of 4.06 - 5.00pre9
...eferable. Thus, maybe each relevant "cat"
command mentioned in the documentation should be replaced by a
reference to read the appropriate document regarding the MBR, where
all the details and the recommended method (not only "cat") are
explained.
5_ The code in "./mbr/altmbr*.*" has been corrected in Syslinux 4.06.
Earlier altmbr code was always setting the first partition as active,
so users using versions prior to 4.06 (most current distros by the
time I'm writing this) should use the new code. Maybe this correction
should be mentioned in the changelog f...
2009 Jun 09
0
SYSLINUX 3.82 released
...unfortunately means that the isohybrid handoff protocol
has changed, so the isohybrid utility must version-match
isolinux.bin.
* Drop support for ACPI 3 extended memory flags.
* Menu system: don't set the autocr flag on the serial
console.
* altmbr: fix handling of logical partitions.
* altmbr: cap at 439 bytes so the partition select byte isn't
part of the file.
Begin3
Title: syslinux
Version: 3.82
Entered-date: 2009-06-09
Description: SYSLINUX is a collection of boot loaders for the Linux...
2015 Nov 19
0
[PATCH] Refactor checksize.pl
...le == "--help" or $file == "-h") {
> + $usage = <<"END_USAGE";
> +Usage: $0 file [maxsize]
> +If maxsize is not given it will be guessed based on filename:
> + - 440 bytes for mbr and gptmbr;
> + - 432 bytes for isohdp;
> + - 439 bytes for altmbr.
> +END_USAGE
> + die $usage;
> +}
>
> if (!defined($maxsize)) {
> # Defaults based on the filename
> if ($file =~ /^mbr[^0-9a-z]/) {
> - $maxsize = $padsize = 440;
> + $maxsize = 440;
> } elsif ($file =~ /^gptmbr[^0-9a-z]/) {
> - $maxsize = $pads...
2017 Mar 21
0
Patch: make slightly more verbose versions of isohdp.x.S
...also says G or M if a GPT or MBR partition is detected.
Signed-off-by: MartinS <ams at ludd.ltu.se>
---
Comments?
diff --git a/mbr/Makefile b/mbr/Makefile
index be2bded..7095396 100644
--- a/mbr/Makefile
+++ b/mbr/Makefile
@@ -21,7 +21,8 @@ include $(MAKEDIR)/embedded.mk
all: mbr.bin altmbr.bin gptmbr.bin isohdpfx.bin isohdppx.bin \
mbr_c.bin altmbr_c.bin gptmbr_c.bin isohdpfx_c.bin isohdppx_c.bin \
- mbr_f.bin altmbr_f.bin gptmbr_f.bin isohdpfx_f.bin isohdppx_f.bin
+ mbr_f.bin altmbr_f.bin gptmbr_f.bin isohdpfx_f.bin isohdppx_f.bin \
+ isohdpfv.bin isohdppv.bin
%.o: %.S...
2009 Apr 04
2
SYSLINUX 3.74-pre17: (hopefully final) release candidate
...rnel (or memdisk) plus large initrd on
such a system.
* MBR: produce alternate MBR variants which force the drive
number to hd0 (_f variants), or force the drive number to
hd0 if the Ctrl key is pressed (_c variants.) Furthermore,
add an MBR variant (altmbr*.bin) which ignores the active
flag and instead boots the partition number specified in the
byte at offset 439 decimal.
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
2018 Jan 01
2
Structure of VBR in FAT32?
Hi Syslinuxers,
I am trying to understand the basic load chain in fat32 and ext4. I dug
into the assembly for MBR, which is pretty straightforward:
1. Find boot partition (or use the pre-defined one at byte 440 for
altmbr.bin)
2. Load the first 512-byte sector of the partition (VBR for fat32, Block
Group 0 padding for ext).
3. Execute that code
The code that is loaded, however, has to be too small (even if using entire
1024 bytes of padding in ext4) to understand ext4 and/or fat32, let alone
find and read the sysli...
2014 Jan 16
3
USB boot problems on Gigabyte GA-M55Plus-S3G
...USB drive with ArchLinux available, and we can keep comparing
against your previous results.
The image I have uploaded is for testing purposes only. Once
extracted from the gzip archive, you get a 700MB test.img to be dd'ed
to your USB device.
The image includes a bootable MBR code ("altmbr.bin" from Syslinux),
no "active" partition is set, one FAT32 (LBA) partition with a
bootable SYSLINUX VBR, and some Syslinux c32 modules in it. Booting
it, should show the Syslinux version, a "hello world" message and the
Syslinux boot prompt.
Please avoid using Gparte...
2018 Jan 02
0
Structure of VBR in FAT32?
...via Syslinux
<syslinux at zytor.com> wrote:
> Hi Syslinuxers,
>
> I am trying to understand the basic load chain in fat32 and ext4. I dug
> into the assembly for MBR, which is pretty straightforward:
>
> 1. Find boot partition (or use the pre-defined one at byte 440 for
> altmbr.bin)
> 2. Load the first 512-byte sector of the partition (VBR for fat32, Block
> Group 0 padding for ext).
> 3. Execute that code
Yep.
> The code that is loaded, however, has to be too small (even if using entire
> 1024 bytes of padding in ext4) to understand ext4 and/or fat32, le...
2014 Jan 22
0
syslinux and btrfs-formatted dos/MBR partition
...my MBR and
> let syslinux overwrite it (yes I did set the boot flag before
> installing syslinux and overwriting the MBR). That didn't make any
> difference.
Which MBR? How did you install it? The common Microsoft one can not
boot a non-primary partition but the Syslinux mbr.bin and altmbr.bin
can.
--
-Gene
A: Because it messes up the order in which people normally read text,
especially the archives of mailing lists.
Q: Why is Top-posting such a bad thing?
"No one ever says, 'I can't read that ASCII(plain text) e-mail you sent me.'"