search for: alix

Hi all, I have successfully compiled and installed Asterisk on an Alix board (AMD Geode 500 Mhz + 256 Mb RAM) on top of Voyage linux (a Debian variant). I'm using it at home for a month. I wondered how much it could be loaded, so I tested it with pbx-test: I could place up to 15 simultaneous SIP calls before it got no more responsive. All in all a good, stable a...

Hi, I've setup a wlan ap using a an alix 2d2 (AMD Geode LX 500 Mhz + AES Offload) and am now trying to encapsulate the wlan traffic into a vpn (tap bridge). Though even when disabling crypto and digest (there is a crypto engine onboard can be setup to handle tinc encryption), the best throughput I get is aroung 2,9 MByte per second (wget...

OS: Debian squeeze Samba: 3.5.6 # testparm --section-name=global -s 2>&1|grep ALIX returns nothing # grep ALIX /etc/samba/smb.conf netbios name = ALIX works -- Regards Harry Jede

Hi Everyone, Knowing that running Asterisk on an embedded board like the Alix2d3 requires some fine tuning. Do you know of any good guides out there that does this from beginning to end? Looking to run this in a small office environment. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/at...

Has anybody tried running Xen on an ALIX 2D3 board? http://www.pcengines.ch/alix2d3.htm If not, has anybody ran Xen on a seriously underpowered PC? The reason why I love these boards so much is that they run at 5W! Of course, I would only run Xen on these for testing purposes. It would just be nice to have a very low powered system t...

Hello, I just set up Debian Lenny on a PCEngines ALIX. This board have a GeodeLX processor with hardware crypto accelerator, so I patched my kernel to get cryptodev support. Everything is fine when playin with openssl, but openssh just crash when a large amount of data is transfered. A small example: alix:~# scp 100meg.test localhost:/dev/null roo...

...econdary ) > change all to yes > > Test it with nmblookup i.e. > # nmblookup SCHULE > querying SCHULE on 127.255.255.255 > 10.100.0.1 SCHULE<00> > > # nmblookup -M SCHULE > querying SCHULE on 127.255.255.255 > 10.100.0.1 SCHULE<1d> > > # nmblookup ALIX > querying ALIX on 127.255.255.255 > 10.100.0.1 ALIX<00> > > # nmblookup -M ALIX > querying ALIX on 127.255.255.255 > querying ALIX on 10.100.255.255 > name_query failed to find name ALIX#1d > > Where SCHULE is the netbios domain name and > ALIX is the PDC nam...

hi, latest changes in dev/ata broke this, on older -stable ... ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire ad0: success setting PIO4 on National chip ad0: 977MB <SanDisk SDCFB-1024 Rev 0.00> at ata0-master PIO4 on latest -stable: ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire and no disk. cheers, danny

...No If this host should be a domain controler ( primary or secondary ) change all to yes Test it with nmblookup i.e. # nmblookup SCHULE querying SCHULE on 127.255.255.255 10.100.0.1 SCHULE<00> # nmblookup -M SCHULE querying SCHULE on 127.255.255.255 10.100.0.1 SCHULE<1d> # nmblookup ALIX querying ALIX on 127.255.255.255 10.100.0.1 ALIX<00> # nmblookup -M ALIX querying ALIX on 127.255.255.255 querying ALIX on 10.100.255.255 name_query failed to find name ALIX#1d Where SCHULE is the netbios domain name and ALIX is the PDC name. > invalid users = > h...

Yes please for the notes. I re-ran the tests without the smbldap-tools. I installed phpldapadmin and am able to login to the apache page using the cn=admin, dn=mydomain and create entries. This kind of tells me that LDAP is working Then I run the pdbedit -Lv and it lists all the users. The following happens when I add the LDAP bits to smb.conf and restart samba.The issue seems to be with samba

...oing to act as a DC etc. [At least > none that I'm aware of and would trust.] > > Even appliances sorta like this, that I've seen, are easily five times the > price. > > -Greg > Howcome no one has though of this before?? What is the "Samba equivalent", as the Alix 2D3 is for SOHO routers?? There's a market gap right there... Or maybe I am the one who thinks this way? Still, thanks for your advice! You are right, so far Optiplexes or similar pretty much fulfill all the requirementes I mentioned before: they are cheap, good looking, silent and with some c...

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny o...

I've given up on getting the other machine to work so I'm looking at building a new one. The machine will be a firewall/gateway running NAT, Web Proxy with Dansguardian, DHCP, DNS, NTP and VPN (~6 clients). I read so much about VPN encryption and the processor needs, now I am unsure if this will work. I can get this for AMD FX-8120 Zambezi 3.1GHz Socket AM3+ 125W Eight-Core Desktop

Hi everyone, I'm interested in using Tinc for building an overlay network on top of a community network. The overlay may consist of some hundreds of nodes, and devices will most probably not be very powerful (Alix or Commell-like or even less). To make the overlay network topology resemble the real one as much as possible, all nodes would ConnectTo all other nodes. Has anyone worked with a Tinc setup similar to this one? Do you thik Tinc would scale up to a network with so many connections so as to still...

...t; Test it with nmblookup i.e. > > # nmblookup SCHULE > > querying SCHULE on 127.255.255.255 > > 10.100.0.1 SCHULE<00> > > > > # nmblookup -M SCHULE > > querying SCHULE on 127.255.255.255 > > 10.100.0.1 SCHULE<1d> > > > > # nmblookup ALIX > > querying ALIX on 127.255.255.255 > > 10.100.0.1 ALIX<00> > > > > # nmblookup -M ALIX > > querying ALIX on 127.255.255.255 > > querying ALIX on 10.100.255.255 > > name_query failed to find name ALIX#1d > > > > Where SCHULE is the netbio...

Dear all, I wanna create a GNU/Linux that it boots from USB. I don't any idea on that. Can you introduce me a doc that i can use it & i can solve my problem? Cheers, -- ------------------------- Mohsen Pahlevanzadeh email address : mohsen at pahlevanzadeh.org web site : http://pahlevanzadeh.org IRC IM : m_pahlevanzadeh yahoo IM : linuxorbsd ----------------------------

...ct as a DC etc. [At least >> none that I'm aware of and would trust.] >> >> Even appliances sorta like this, that I've seen, are easily five times the >> price. > > Howcome no one has though of this before?? What is the "Samba equivalent", > as the Alix 2D3 is for SOHO routers?? There's a market gap right there... Tbh, you might get away with using PCEngines' APU boards (the successor to their Alix boards with a massively upgraded CPU) if individual machines don't need RAID (because everything is replicated anyway). > Or maybe I a...

On Thu, Dec 4, 2014 at 5:19 AM, Sven Schwedas <sven.schwedas at tao.at> wrote: > Tbh, you might get away with using PCEngines' APU boards (the successor > to their Alix boards with a massively upgraded CPU) if individual > machines don't need RAID (because everything is replicated anyway). > I considered that, but what would you use for storage?? They have an mSATA port, but a decent mSSD costs twice as much as whole appliance! =( George

Hi all, I was wondering if it possible to have a Centos LiveCD installation boot from a Compact Flash in a embeded x86 (Wrap/Alix) platform *and* be able to save the changes made to the File System back to the Flash memory. So, the next time the LiveCD boots it will have all the changes made. The problem I'm trying yo solve is: - fast boot time - fast recovery when the Linux is shutdown improperly (power failure, etc) -...

I have a working setup with samba & squid on one machine. However it seems that ntlm_auth is not doing what I expected. As an unprivilegd user I am able to test succesfull password: ute at alix:~$ ntlm_auth -V Version 3.5.6 ute at alix:~$ ntlm_auth --username=hans --password=keins NT_STATUS_OK: Success (0x0) Surely I know this password. Now the same with diagnostics on: ute at alix:~$ ntlm_auth --diagnostics --username=hans --password=keins winbind client not authorized to use wi...