search for: agm

...9;upsstats' battery voltage meter for these E5115 UPS boxes is almost in the lower level RED zone which is just under 40 volts. The GREEN zone seems to be 48 to 55 volts with a RED zone above that. Here's the confusing part: These Eaton E5115 UPS boxes only have 3x 12v 9Ah sealed lead-acid AGM battery blocks inside them. I verified that after I recently changed out some aged batteries from those boxes. There is no room for any more battery blocks in the case. NUT 'upsstats' reports the battery voltage as 40.25 volts for 1 of the UPS boxes and 39.02 volts for the other UPS box. T...

...voltage meter for these E5115 UPS boxes is > almost in the lower level RED zone which is just under 40 volts. The GREEN > zone seems to be 48 to 55 volts with a RED zone above that. > > Here's the confusing part: These Eaton E5115 UPS boxes only have 3x 12v > 9Ah sealed lead-acid AGM battery blocks inside them. I verified that after > I recently changed out some aged batteries from those boxes. There is no > room for any more battery blocks in the case. > > NUT 'upsstats' reports the battery voltage as 40.25 volts for 1 of the UPS > boxes and 39.02 volts...

...ing for blown fuses, loose connections, anything visually obvious, but found nothing. The old batteries measured 12.x volts each and the new batteries measured 13.x so I don't think I got a bad battery. I replaced with the same batteries I'd used in the past: Duracell SLADC12-35J Deep Cycle AGM SLA 12V 35AH; the last set lasted 7 years. Tripp-Lite considers these batteries to be non-user replaceable, likely because they're bolt on and opening the case is a bit of a chore. It's a well built unit though. The UPS has a system enable switch on the back and a momentary on/off switch o...

On 11/12/2024 10:58 AM, Dan Langille via Nut-upsuser wrote: > Hello, > > nut recently told me that the batteries need replacing in my Eaton 5PX2200RT (ups) and 5PXEBM48RT (external battery pack). According to my notes, it has been just over 4 years since I installed them. Looking at on-line sales, these seem to use batteries in a pre-packaged plastic shell. I don't recall if

Hello, I'm trying to run a loop that will subset my data into specific sets by regions and by race/ethnicity. I'm trying to do this fairly compactly, and I cannot get this to work. A "simple" version of the code that I am trying to run is: names <- c("white", "black", "asian", "hispanic") for(j in names){ for(i in 1:9){

...her way, which make some sense out of data. 3. I have some color issues as the number of genes increases the green and black colors are not as much as prominent as red? Thank you so much for your help in advance. Thank you Khushwant -------------- next part -------------- CAF CAS INF INS AP1 AP3 AGM SAP S04 S52 LEF LES ROF ROS GSE SIF SIS At1g01940 107 111 20 27 40 52 27 8 6 24 40 18 67 85 35 56 118 At1g26940 35 27 30 28 15 41 12 73 6 15 21 11 60 35 6 24 77 At1g53720 34 35 16 52 15 27 24 13 3 12 35 6 43 51 1 21 25 At1g53780 2 6 2 11 6 9 7 0 0 0 6 10 5 19 0 0 0 At1g74070 0 16 18 41 18 23 13 9 6...

...geshack.us/i/bildschirmfotow.png/) I use Ubuntu 10.10 and tried wine 1.2 from the ubuntu repository and from Wine-PPA. I also played around with the winecfg display settings and a few DirectX registry keys but with no effect... I have an acer TravelMate5720 notebook with intel graphics X3100. The agme is built with DirectX 9 as I can read from the game box... Do you have any idea? Thanks in advance! floyd

...reboot for the changes to take effect. I've also got an adb program to dump all the ipc parameters. Very handy. I can send it via private mail. (in return for some .dk culinary token). Good Luck, - Andrew - -------------- next part -------------- #!/bin/sh # # Print kernel IPC structures. AGM 4/97 # /bin/adb -k /vmunix /dev/mem << EOF version,(utsname-version)?c msginfo?n"msgmap"8t1Dn"msgmax"8t1Dn"msgmnb"8t1Dn"msgssz"8t1Dn"msgtql"8t1Dn"msgseg"8t1dnn seminfo?n"semmap"8t1Dn"semmni"8t1Dn"semmns"...

...voi. Vi sono giocatori nel Sistema che arrivano a spedire anche 1 milione di e-mail nel giro di un paio di settimane: vi lascio pensare qual ? l'entit? della loro vincita !!!! PUOI ORDINARE LA TUA LISTA DEI REPORT IN ITALIANO DA: REPORT NUMERO 1 : "Il nuovo, gratuito e-mail software AGM ? Completo" Ordina il report numero 1 da: Andrea Casella Postale, 9 37054 Nogara (VR) _____________________________________________________________________________________ REPORT NUMERO 2 : "Il completo setup di un nuovo, veloce e gratuito Internet Provider" Italiano Ordina i...

...exM 9.759 2.077 4.700 2.61e-06 ***Study.SiteNorth -9.873 18.211 -0.542 0.58770 Study.SiteSouth -5.397 18.120 -0.298 0.76584 ---Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Correlation of Fixed Effects: (Intr) AGM(6- AGO(10 AGO(15 AGO(20 AGY(0- AGY(4- SexM Std.SNAgGrpM(6-9) -0.070 AgGO(10-14) -0.078 0.842 AgGO(15-19) -0.078 0.785 0.845 AgGO(20-29) -0.092 0.695...

...0- 37e9000 Deferred bib PE 3b20000- 3e74000 Deferred dvaadameve PE 3e80000- 3e9b000 Deferred adbeapecore PE 4900000- 49b9000 Deferred adobepip PE 49c0000- 4a2a000 Deferred adobe_caps PE 5050000- 514b000 Deferred ace PE 5260000- 57f7000 Deferred agm PE 5910000- 5c07000 Deferred cooltype PE 10000000-10091000 Deferred sccore PE 12000000-121ca000 Deferred xerces-c_2_6 ELF 20000000-2001b000 Deferred wsock32<elf> \-PE 20010000-2001b000 \ wsock32 ELF 2001b000-20051000 Deferred winhttp<elf&...

...00h got it, response STBM should be widely > implemented: > http://webcache.googleusercontent.com/search?q=cache:Pt8WJTtgaW0J:old.networkupstools.org/protocols/eaton/UC2concept-1002889j.odt+upscode+II+pdf&cd=1&hl=de&ct=clnk&gl=de > > BTW, possible bug: Wether my new lead AGM batteries are broken (Cold weather > storage damage in GLS logistics transport?) > http://media.rotek.at/a000/000/007/000000007_V000000_HAB_HIG_00_RT_A_de.pdf > > *or the charge estimation calculator of the driver is broken: > > battery.capacity.nominal: 17.00 > battery.charge:...

...E 9c90000- 9fe4000 Deferred dvaadameve PE 9ff0000- a17c000 Deferred dvacore PE a180000- a501000 Deferred dvaui PE b1e0000- b229000 Deferred bib PE b340000- b380000 Deferred bibutils PE b490000- b58c000 Deferred ace PE b7a0000- bb0a000 Deferred agm PE bc20000- bf17000 Export cooltype PE d140000- d394000 Deferred scriptingsupport.8li PE d3a0000- d446000 Deferred extendscript PE d450000- d4e1000 Deferred sccore PE db70000- db8b000 Deferred adbeapecore PE 10000000-10009000 Deferred adbeape PE 1111...

...urrent, and that's only when charging from a deep discharge. * RV Converter/Charger: PowerMax PM4 55A 12V. This is a lead acid battery charger that will also provide power after batteries are charged. Many battery chargers are not designed to be run 24/7, this one is. * Two 12V 200Ah Renology AGM deep cycle batteries wired in parallel. Got a deal on these. I decided I was ok with 75%-80% DoD even though these are lead acid. This gives me about 3.5kWh of usable AC capacity. * Batteries and charger are wired up with 4AWG, the inverter is something smaller, I think 6AWG? What I have built i...

...when charging from a deep discharge. > > * RV Converter/Charger: PowerMax PM4 55A 12V. This is a lead acid battery > charger that will also provide power after batteries are charged. Many > battery chargers are not designed to be run 24/7, this one is. > > * Two 12V 200Ah Renology AGM deep cycle batteries wired in parallel. Got a > deal on these. I decided I was ok with 75%-80% DoD even though these are > lead acid. This gives me about 3.5kWh of usable AC capacity. > > * Batteries and charger are wired up with 4AWG, the inverter is something > smaller, I think 6AW...

On 5/16/24 08:59, Jim Klimov via Nut-upsuser wrote: > I agree with earlier posters, such documentation can help future > tinkerers. There is probably more than just one to hold the hand and > walk through the ordeals :) > > Perhaps a new page at https://github.com/networkupstools/nut/wiki > <https://github.com/networkupstools/nut/wiki> can be a good location... >

...xKVfuFG$bd0Y3l&}{rK^=9)u#w1lRbi8{M^-L^{GeY zA}pIz@0UGZ4;TpDd0d{5T9>rjJ#k%E1KO%F^QgdP+BGka?dgC+Y;hNjH?#M1|N7e^ zrn8TfC2~D-zb_7`1bU-%6LLP+a#Ek4mcQ9@H#$Hv&wU*kPowr*R-cT>i8l_PqkS}< zxs!&aq86MszgA8*O)WPx<`+}N<#*_oKbQO$l>^!mDs&{42dW%TCIGEzq?AInltX8l ztbtO-(dP6+8~cYr(F>agm-qDgG8Tx;<++MSGWEoB;6SrBhoTp?kDU8$%s9BbU)+0N zyuitxgzi+WKi(EHm&b`yY(0f_?VTS~)SB_s!}wnyd(T^Zx+|aVTb<?+QaL8r`4bfV zK;&!Yyhzgj+t08`mz7<)-3Qy^W82zAQ?6tNMO;)WX3@1PlJd&*{GOn>HJ#?g>=kWE zMB@Lr0QPvY?8a|V23hA2uAZ_)>rL_%%VVu4Jmz(U4GF*~8>L~1BAfCHF`rCgXTCrX z7`E-&2;zKzC5q@ol...

...zc7!B_DY3^t_k29IdGyDt$(s(d`w6UVjg}S0C~EGV+L3HN4dvyf;#&@<;+v(P at a2&J z{K{3(6IdEPR9cb+_hy at 0VLDc&qBsO_9xs(ph%ktQ{aECOX^d$!Tqf at gPhCcPS_*(6 zr2t=an^EJdE{P4S_T`~#8FgXD`++beZG5m0fG;DF>#?c^qBX-zS!Qse*npBnGhS0U zA)nQ2*SvdYhNXUmw@^?$%dgT!m*dZ>m}u0>p7)`?p6o!8#q+?oZuDkE-UcD8 at aGmK z^@$RyvGAU3{;KM7fCY>?>yDPB!t;K{qn;=sS2XQQYf$I_VA8LN*vv0pUR%8HoB74Y zv68ws{9gUgqdRGGVTR+hvP3MxD8I`=3d0r2$_g>L1h|Fn4^zGI)}S{n9?CqjVLmE1 z1c<ZBUw%{l`#j~g17UO at j7{bUk`)z|`<D~Hs%&j3v>il_5i9iHJU8(}{<l9SrPq8B zY-pe~gX}23_A3<_R<y5X-McqU86_<<)C+<zV0E?qAUu49K*fgzToT...

Hello, I am using R to look at whole-genome gene expression data. This means about 27,000 genes, each with a vector of numbers reflecting expression at different tissues and times. I need to do an all against all co-expression calculation (basically, just calculate Pearson's r for every gene-gene pair). I try to store the result of such a thing in a 27000x27000 matrix, but r seems not to like

Last week someone in my localnetwork "abused" from our link, making everything slow... So I want to put the current Linux router as a traffic shaper. The setup is: +--- 128Kbit | "International" Local net --- [Linux router with ] -- ISP -- [magic routers]