search for: aex410

Poking around the zaptel SVN earlier today i see support was added for an AEX410 card recently... I'm going to go out on a limb and assume this is the PCI-Express version of the TDM410? Any hints on a general availability date? -- Matt

Asterisk 11.1 We have a situation where one of our incomings POTS lines will not answer. There are 2 lines configured by the Telco as a rollover group (rings the line that is not busy) and they feed into a Digium AEX410 on the server. The most recent time this happened, I did a /etc/init.d/dahdi status and saw this: ### Span 4: WCTDM/1 "Wildcard AEX410" *53 FXO FXSKS (EC: VPMOCT032 - INACTIVE) RED* 54 FXO FXSKS (EC: VPMOCT032 - INACTIVE) 55 FXO FXSKS (EC:...

...oking for suggestions on handling incoming Caller-ID issues. The card manages to grab a couple of (random) digits of the incoming CID, but they're more or less useless. Is there any way to fix this? Asterisk 1.8.13, Dahdi 2.5.0.1 on Debian Testing (Wheezy), MTNL Mumbai. Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express) chan_dahdi.conf contains: usecallerid = yes cidsignalling=dtmf cidstart=polarity_in Signalling is fxsks. Log (calling number is 9811066XXX): [Sep 14 08:21:11] DEBUG[9337]: chan_dahdi.c:11895 do_monitor: Monitor doohicky got event Ring Begin on channel 1 [Sep 14...

...dKeypadFacility' [Sep 1 10:57:51] ERROR[31696]: chan_dahdi.c:8786 mkintf: Unable to get parameters: Inappropriate ioctl for device [Sep 1 10:57:51] ERROR[31696]: chan_dahdi.c:14170 build_channels: Unable to register channel '1' # dahdi_scan [1] active=yes alarms=OK description=Wildcard AEX410 Board 1 name=WCTDM/0 manufacturer=Digium devicetype=Wildcard AEX410 with VPMADT032 location=PCI Express Bus 11 Slot 09 basechan=1 totchans=4 irq=16 [2] active=yes alarms=UNCONFIGURED description=DAHDI_DUMMY/1 (source: HRtimer) 1 name=DAHDI_DUMMY/1 manufacturer= devicetype=DAHDI Dummy Timing locatio...

I'm having an issue with some Snom 300s on a server running Asterisk version 13.9.1, Dahdi 2.11.1 w/OSLEC and pjsip 2.5.1. There is _*NO NAT*_ involved. Phones and server are plugged into the same network switch, all on the same IP range. The server is running a Wildcard AEX410 analog card with 2 FXO modules receiving incoming analog lines. Occasionally, in the middle of a call, the audio will drop out for between 15 and 20 seconds before suddenly coming back. I've tried running u-Law as the codec and licensed g.729 version 13.0_3.1.7 with exactly the same result...

...versions, however) without seeing such behaviour. Is this expected or could this be related with the "HDLC Aborts" / "Bad FCS" and general failures we've been experiencing ? System info (same for both): HW: HP Proliant ML310 G5 TE121 + VPMADT032 AEX410 + 4x FXS + without DSP OS: CentOS 5.3, kernel 2.6.18-164.el5 DAHDI: 2.2.0.2 libpri: 1.4.10.2 Asterisk: 1.4.26.2 Here is a session transcript for pbxfrv (not in production) showing the odd DAHDI / system load behaviour. It starts with DAHDI unloaded: # uname -a Linux pbxfrv.replac...

...available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete 2.4.1.1 is a maintenance release to fix a regression in DAHDI-Linux 2.4.1 from DAHDI-Linux 2.4.0 which prevented the LEDS on the TDM410 and AEX410 panel from lighting when the wctdm24xxp module loads (#18939) [1]. [1] https://issues.asterisk.org/view.php?id=18939 Issues found in these releases can be reported in the DAHDI-linux project at https://issues.asterisk.org Thank you for your continued support of Asterisk!

...manual process). I've made an IAX2 trunk between the two servers, but can't figure out how to redirect incoming calls into Server B to the IVR on Server A. Server A TDM410 with three FXO and one FXS modules Holds the IVR and all of the extensions POTS 1 POTS 2 POTS 3 Server B AEX410 (1AEX404EF) with four FXO modules POTS 4 POTS 5 POTS 6 PBX in a Flash Version 1.4 Asterisk Source Version : 1.4.21.2 Zaptel Source Version : 1.4.12.1 Thanks, Michael Michael Biven Systems Administrator Crowd Science office 650-625-9722 ext 216 michael at crowdscience.com

...available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete 2.4.1.1 is a maintenance release to fix a regression in DAHDI-Linux 2.4.1 from DAHDI-Linux 2.4.0 which prevented the LEDS on the TDM410 and AEX410 panel from lighting when the wctdm24xxp module loads (#18939) [1]. [1] https://issues.asterisk.org/view.php?id=18939 Issues found in these releases can be reported in the DAHDI-linux project at https://issues.asterisk.org Thank you for your continued support of Asterisk!

...ers fluctuate between %99.90 and %99.99 which seem to cause the above errors. We tried Sangoma UT50 as a timing device (it's USB based), but the test results were worse (between 99.98 - 99.97 when idle, and had big dips when loaded and there is no IRQ sharing). We are planning to order Digium AEX410 cards hoping they will be an improvement over dahdi_dummy and Sangoma. Does anyone have experience with these cards? Can we get a stable performance from them even under load? Also (for Digium developers who might be reading this list), any plans for decoupling SLA from dahdi timing in future rele...

Dears; I need to order Digium card and not able to know which one is the best quality? Is it that of AEX with the end E or EF or P or B? I saw those card that its slot is small (I think those that end by EF), are they the best card? Really I am caring to have a card that has echo cancelation and the voice volume is high enough (because previously I faced the problem that the voice volume was

I'd like to have my Asterisk system pick up a certain extension on an existing Panasonic PBX when it rings. (It's connected to some proprietary Panasonic doorphones that I haven't replaced yet.) I connected that extension to an FXO port on a Digium AEX410 card, and set that channel to have the context "doorphone". The problem is that the extension is never executed. With debugging on, I see: Nov 23 16:37:23] DEBUG[20077]: chan_dahdi.c:11896 do_monitor: Monitor doohicky got event Ring Begin on channel 12 [Nov 23 16:37:23] DEBUG[20077]: s...

On a BT line, how do I determine whether the number on an incoming call has been deliberately withheld (by dialling 141) or is merely unavailable (e.g. because it originated from overseas or passed through some ancient switching equipment) ? In the first case, I want the caller to be played a message to the effect that we are not at home to anonymous cowards but if their business is

Hey all, We have been using a TDM400 card at work to provide our IVR. We we have upgraded our server and now require the same capability, but on a card that goes into a PCI Express. Any suggestions would be greatly appreciated. oh, and it has to work with the zaptel drivers for linux. thanks all. sk -------------- next part -------------- An HTML attachment was scrubbed... URL: