search for: adapters

This patch adds support for virtual IOMMU to the vmxnet3 module. We switch to DMA consistent mappings for anything we pass to the device. There were a few places where we already did this, but using pci_blah(); these have been fixed to use dma_blah(), along with all new occurrences where we've replaced kmalloc() and friends. Also fix two small bugs: 1) use after free of rq->buf_info in

This patch adds support for virtual IOMMU to the vmxnet3 module. We switch to DMA consistent mappings for anything we pass to the device. There were a few places where we already did this, but using pci_blah(); these have been fixed to use dma_blah(), along with all new occurrences where we've replaced kmalloc() and friends. Also fix two small bugs: 1) use after free of rq->buf_info in

...nie at opensource.wolfsonmicro.com> > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 82bb3b2..5a19ae0 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -620,6 +620,14 @@ config SCSI_FLASHPOINT > substantial, so users of MultiMaster Host Adapters may not > wish to include it. > > +config VMWARE_PVSCSI > + tristate "VMware PVSCSI driver support" > + depends on PCI && SCSI && X86 > + help > + This driver supports VMware's para virtualized SCSI HBA. > + To compile this driver as a...

...nie at opensource.wolfsonmicro.com> > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 82bb3b2..5a19ae0 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -620,6 +620,14 @@ config SCSI_FLASHPOINT > substantial, so users of MultiMaster Host Adapters may not > wish to include it. > > +config VMWARE_PVSCSI > + tristate "VMware PVSCSI driver support" > + depends on PCI && SCSI && X86 > + help > + This driver supports VMware's para virtualized SCSI HBA. > + To compile this driver as a...

...uk> M: Mark Brown <broonie at opensource.wolfsonmicro.com> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 82bb3b2..ebfddff 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -620,6 +620,14 @@ config SCSI_FLASHPOINT substantial, so users of MultiMaster Host Adapters may not wish to include it. +config VMWARE_PVSCSI + tristate "VMware PVSCSI driver support" + depends on PCI && SCSI && X86 + help + This driver supports VMware's para virtualized SCSI HBA. + To compile this driver as a module, choose M here: the + module w...

...uk> M: Mark Brown <broonie at opensource.wolfsonmicro.com> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 82bb3b2..ebfddff 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -620,6 +620,14 @@ config SCSI_FLASHPOINT substantial, so users of MultiMaster Host Adapters may not wish to include it. +config VMWARE_PVSCSI + tristate "VMware PVSCSI driver support" + depends on PCI && SCSI && X86 + help + This driver supports VMware's para virtualized SCSI HBA. + To compile this driver as a module, choose M here: the + module w...

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com>

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com>

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com> --- VMware

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com> --- VMware

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com>

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com>

This patch adds experimental VMDq support (AKA Netchannel2 vmq) to the ixgbe driver. This applies to the Netchannel2 tree, and should NOT be applied to the "normal" development tree. To enable VMDq functionality, load the driver with the command-line parameter VMDQ=<num queues>, as in: $ modprobe ixgbe VMDQ=8 You can then set up PV domains to use the device by modifying your VM

SimCity 4 has a lot of problems of its own that cause it to Crash to the Desktop quite often. However, the failure to provide more than one back buffer makes it hard to run large cities, and has gotten past annoyance for me, at least. Here is my latest log, from initiation of the game to the point where I finally killed it because the graphics had gone crazy again. My system has MB of graphics

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC : vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com> ---

Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara at vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC : vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara at vmware.com> ---

We can't just do virt_to_phys() on memory that we pass to the device and expect it to work in presence of a virtual IOMMU. We need to add IOMMU mappings for such DMAs to work correctly. Fix that with pci_alloc_consistent() where possible, or pci_map_single() where the mapping is short-lived or we don't control the allocation (netdev). Also fix two small bugs: 1) use after free of

We can't just do virt_to_phys() on memory that we pass to the device and expect it to work in presence of a virtual IOMMU. We need to add IOMMU mappings for such DMAs to work correctly. Fix that with pci_alloc_consistent() where possible, or pci_map_single() where the mapping is short-lived or we don't control the allocation (netdev). Also fix two small bugs: 1) use after free of

On 2019/10/16 ??9:30, Zhu Lingshan wrote: > This commit introduced IFC VF operations for vdpa, which complys to > vhost_mdev interfaces, handles IFC VF initialization, > configuration and removal. > > Signed-off-by: Zhu Lingshan <lingshan.zhu at intel.com> > --- > drivers/vhost/ifcvf/ifcvf_main.c | 541 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 541

Hi, I have a qplot like the one in the minimal example below, except I also have faceting like this: qplot(jitter(Goodall),jitter(Better.adapt),colour=Second.adapt,facets=~Pol,data=d1) and with the real data I get quite a lot of overplotting, so I would like to add an alpha channel. In addition, I would like to be able to control which colors are used for each value of Second.adapt (which