Displaying 11 results from an estimated 11 matches for "ada3".
Did you mean:
ada
2011 Jan 29
19
multiple disk failure
...ada7 ONLINE 0 0 0
raidz1 UNAVAIL 0 0 0 insufficient replicas
ada0 UNAVAIL 0 0 0 cannot open
ada1 UNAVAIL 0 0 0 cannot open
ada2 UNAVAIL 0 0 0 cannot open
ada3 UNAVAIL 0 0 0 cannot open
0(offsite)#
2013 Nov 03
1
FreeBSD 10 Beta 2: make installkernel failure with installer provided ZFS configuration.
...p1
crw-r----- 1 root operator 0xa2 Nov 3 10:01 /dev/ada2p2
crw-r----- 1 root operator 0xa4 Nov 3 10:01 /dev/ada2p3
crw-r----- 1 root operator 0xc2 Nov 3 10:01 /dev/ada2p3.eli
crw-r----- 1 root operator 0xa6 Nov 3 10:01 /dev/ada2p4
crw-r----- 1 root operator 0x83 Nov 3 10:01 /dev/ada3
crw-r----- 1 root operator 0xa9 Nov 3 10:01 /dev/ada3p1
crw-r----- 1 root operator 0xab Nov 3 10:01 /dev/ada3p2
crw-r----- 1 root operator 0xad Nov 3 10:01 /dev/ada3p3
crw-r----- 1 root operator 0xce Nov 3 10:01 /dev/ada3p3.eli
crw-r----- 1 root operator 0xaf Nov 3 10:01 /dev/ad...
2012 Dec 17
1
WRITE_FPDMA_QUEUED CAM status: ATA Status Error
...range 32, base 0x3000, size 16, enabled
cap 01[64] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 12 split
transactions
cap 05[54] = MSI supports 1 message, 64 bit enabled with 1 message
siisch2: Error while READ LOG EXT
(ada3:siisch2:0:3:0): WRITE_FPDMA_QUEUED. ACB: 61 56 af 71 0a 40 40 00
00 00 00 00
(ada3:siisch2:0:3:0): CAM status: ATA Status Error
(ada3:siisch2:0:3:0): ATA status: 00 ()
(ada3:siisch2:0:3:0): RES: 00 00 00 00 00 00 00 00 00 00 00
(ada3:siisch2:0:3:0): Retrying command
siisch2: Error while READ LOG EX...
2013 Feb 23
1
Old ICH7 SATA-2 question
Hello there, I've got a question about SATA.
I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support)
A few HDD with SATA2.
system:
uname -a
FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666:
Tue Feb 12 00:19:07 MSK 2013
root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64
camcontrol info
camcontrol iden ada2
pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x
2013 Nov 23
2
SSD becomes detached 9.2
...00000000 rs 00000008 tfd 50 serr
00000000 cmd 00046317
(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00
00 00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked
After this event, gpart show lists only ada1, ada2, and ada3. The boot
drive is ada0.
The entire dmesg can be seen at http://pastebin.com/RqR8LiSb.
--
Jim Ohlstein
2012 Oct 08
2
time keeps on slipping... slipping...
...known as ad1
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST31000340AS SD04> ATA-7 SATA 1.x device
ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad2
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad3
SMP: AP CP...
2010 Oct 02
3
out of HDD space - zfs degraded
...1.91T 5.50G /storage/pgsql
$ sudo camcontrol devlist
Password:
<Hitachi HDS722020ALA330 JKAOA28A> at scbus2 target 0 lun 0 (pass1,ada1)
<Hitachi HDS722020ALA330 JKAOA28A> at scbus3 target 0 lun 0 (pass2,ada2)
<Hitachi HDS722020ALA330 JKAOA28A> at scbus4 target 0 lun 0 (pass3,ada3)
<Hitachi HDS722020ALA330 JKAOA28A> at scbus5 target 0 lun 0 (pass4,ada4)
<Hitachi HDS722020ALA330 JKAOA28A> at scbus6 target 0 lun 0 (pass5,ada5)
<Hitachi HDS722020ALA330 JKAOA28A> at scbus7 target 0 lun 0 (pass6,ada6)
<ST380815AS 4.AAB> at scbus8 target...
2012 Feb 03
6
Spectacularly disappointing disk throughput
...v/null skip=100000 bs=4096
count=1000
1000+0 records in
1000+0 records out
4096000 bytes transferred in 8.058105 secs (508308 bytes/sec)
Concurrent reads from all five SATA drives show that they''re able to
achieve this speed all at the same time:
[root@freenas /dev]# for disk in ada1 ada2 ada3 ada4 ada5
> do dd if=/dev/$disk of=/dev/null bs=4096 count=1000 &
> done
4096000 bytes transferred in 8.049052 secs (508880 bytes/sec)
4096000 bytes transferred in 8.070050 secs (507556 bytes/sec)
4096000 bytes transferred in 8.071446 secs (507468 bytes/sec)
4096000 bytes transferred in 8...
2019 Aug 11
2
Can't replicate DCs
...e 54, in
drsuapi_connect
raise drsException("DRS connection to %s failed: %s" % (server, e))
===============================================================
DC2 -
Valemount\DC2
DSA Options: 0x00000001
DSA object GUID: 617c7792-2980-4625-917d-21418ac96f06
DSA invocationId: b5e8a8b6-ada3-472f-bee8-4e7d9ab813bc
==== INBOUND NEIGHBORS ====
CN=Configuration,dc=ad,dc=example,dc=com
McBride\DC1 via RPC
DSA object GUID: a908c575-ddb1-4e89-98e1-97d3e55bf213
Last attempt @ Sun Aug 11 15:40:51 2019 PDT failed, result
8453 (WERR_DS_DRA_ACCESS_DENIED)...
2014 Mar 24
0
Samba documentation feedback: installation guide for AD join
...urces ====
* DFS-N (=DFS-Share) vs. DFS-R (=Replikation service): http://www.firstattribute.com/de/active-directory/know-how/distributed-file-system-(dfs)/
* LDAP-Query to access data of DFS: CN=Dfs-Configuration,CN=System,DC=my,DC=domain,DC=com, column [pKT] (BLOB)
* Schema-Spezifikation [MS-ADA3] f?r column [pKT]: http://msdn.microsoft.com/en-us/library/cc220699.aspx (Attention: MS patents), http://msdn.microsoft.com/en-us/library/cc227145.aspx
* Samba DFS setup: http://www.eisfair.org/fileadmin/eisfair/doc/node60.html
* Samba Print-Server-setup: http://www.eisfair.org/fileadmin/eisfai...
2013 Jun 19
3
shutdown -r / shutdown -h / reboot all hang and don't cleanly dismount
Hello -STABLE@,
So I've seen this situation seemingly randomly on a number of both
physical 9.1 boxes as well as VMs for I would say 6-9 months at least.
I finally have a physical box here that reproduces it consistently
that I can reboot easily (ie; not a production/client server).
No matter what I do:
reboot
shutdown -p
shutdown -r
This specific server will stop at "All buffers