search for: ada0

...rtmontools. CPU is an AMD-8120 (8 core Zambezi). Very little is running on the server as it is not yet in production (thankfully). Here is the relevant part of dmesg: ahcich0: Timeout on slot 31 port 0 ahcich0: is 00000008 cs 00000000 ss 00000000 rs f8000000 tfd 40 serr 00000000 cmd 00047f17 (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 10 20 ff a6 40 01 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: Command timeout (ada0:ahcich0:0:0:0): Retrying command ahcich0: Timeout on slot 31 port 0 ahcich0: is 00000002 cs 00000000 ss 00000000 rs 80000000 tfd 50 serr 00000000 cmd 00047f17 (apro...

...3670 GByte in 10 h 40 min 97.8 MB/s mbuffer: warning: error during output to <stdout>: Broken pipe warning: cannot send 'storage/bacula@transfer': Broken pipe real 640m48.423s user 8m52.660s sys 211m40.862s Looking in the logs, I see this: Oct 2 00:50:53 kraken kernel: (ada0:siisch0:0:0:0): lost device Oct 2 00:50:54 kraken kernel: siisch0: Timeout on slot 30 Oct 2 00:50:54 kraken kernel: siisch0: siis_timeout is 00040000 ss 40000000 rs 40000000 es 00000000 sts 801f0040 serr 00000000 Oct 2 00:50:54 kraken kernel: siisch0: Error while READ LOG EXT Oct 2 00:50:55 kr...

...version P01-A3 to version P01-A4 (the newest available), still no dice. If I use the usb stick I installed from, I can select the boot device, and actually boot from it, so there doesn't seem to be anything wrong with the SSD. I tried: kg-vm2# gpart bootcode -b /boot/pmbr -p /boot/gptboot -i 1 ada0 bootcode written to ada0 in case there was something wrong with the bootcode, but I still get the message "ERROR: No boot disk has been detected or the disk has failed." gpart shows this: root@kg-vm2# gpart show ada0 => 34 250069613 ada0 GPT (119G) 34 128...

...ONLINE 0 0 0 ada4 ONLINE 0 0 0 ada5 ONLINE 0 0 0 ada6 ONLINE 0 0 0 ada7 ONLINE 0 0 0 raidz1 UNAVAIL 0 0 0 insufficient replicas ada0 UNAVAIL 0 0 0 cannot open ada1 UNAVAIL 0 0 0 cannot open ada2 UNAVAIL 0 0 0 cannot open ada3 UNAVAIL 0 0 0 cannot open 0(offsite)#

Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn?t work: exten => _0.,1,SetCallerID,526910 exten => _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI> -- Executing SetCallerID("SIP/226-ada0", "526910") in new stack -- Executing Dial("SIP/226-ada0", "CAPI/526980:0408665390") in new stack -- Called 526980:0408665390 -- CAPI[contr3/526980]/0 is ringing My mobile is only showing some other number that my isdn line is having. ---JanM---

...to a lower UDMA mode? Best regards Oliver PS: Excerpt from dmesg ... atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 17.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IBM-DJNA-352500 J51OA30K> ATA-4 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 24405MB (49981680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata1 bus 0 scbus1 target 0 lun 0 ada1: <ST3250824A 3.AAE...

Hi, Is there anything known about ZFS under 10.0-BETA4 when FreeBSD was upgraded from 9.2-RELEASE? I have two servers, with very different hardware (on is with soft raid and the other have not) and after a zpool upgrade, no way to get the server booting. Do I miss something when upgrading? I cannot get the error message for the moment. I reinstalled the raid server under Linux and the other

...sec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at a...

Hi Guys, Has somebody encountered (significantly) different read/write speeds when using gmirror? I have 2xWD WD30EFRX RED drives which are configured as follows: $ gmirror status Name Status Components mirror/root COMPLETE ada0p2 (ACTIVE) ada1p2 (ACTIVE) mirror/data COMPLETE ada0p4 (ACTIVE) ada1p4 (ACTIVE) mirror/root is mounted as the root fs (UFS2). Doing write: $ time dd if=/dev/zero of=/IMAGE bs=1024k count=`expr 4 \* 1024` 4096+0 records in 4096+0 records out 42949...

...ab # Device Mountpoint FStype Options Dump Pass# /dev/gpt/swap0 none swap sw 0 0 /dev/gpt/swap1 none swap sw 0 0 /dev/gpt/swap2 none swap sw 0 0 /dev/gpt/swap3 none swap sw 0 0 /dev/gpt/swap4 none swap sw 0 0 root at els1:/usr/src # ll /dev/ada* crw-r----- 1 root operator 0x5f Nov 3 10:01 /dev/ada0 crw-r----- 1 root operator 0x64 Nov 3 10:01 /dev/ada0p1 crw-r----- 1 root operator 0x66 Nov 3 10:01 /dev/ada0p2 crw-r----- 1 root operator 0x74 Nov 3 10:01 /dev/ada0p3 crw-r----- 1 root operator 0x8f Nov 3 10:01 /dev/ada0p3.eli crw-r----- 1 root operator 0x76 Nov 3 10:01 /dev/ad...

...And for the record - I can't switch ICH 7 to ahci due to bios limitations. And one more, I've got netbook with ICH7 (NM-10 mb). It uses achi driver, and HDD says it's ahci0: <Intel ICH7 ACHI SATA controller> <...> ahic0: AHCI v1.10 with 4 3Gbs ports <...> <...> ada0: <vendor blah-blah-blah> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled As far as I remember without AHCI there's no NCQ support. But why with SATA300 controller on P5GC-MX/1333 I've got only 150 transfers? Is it'...

...works fine but multiplayer, when I try to create game I see message box with "multiplayer_creation_failure" apper and log looks so: err:ole:CoGetClassObject couldn't load InprocServer32 dll dpnet.dll fixme:ole:CoCreateInstance no classfactory created for CLSID {934a9523-a3ca-4bc5-ada0-d6d95d979421}, hres is 0x80070005 but dpnet.dll is in c:\winnt\system32 and "system" = "C:\\winnt\\SYSTEM32". If I use native ole32, rpcrt4, oleaut32 except built in my logs looks so: fixme:ntdll:RtlGetNtProductType (0x407dee3c): stub fixme:ntdll:NtConnectPort (0x44701dd0,L&...

...orfinn Ingolfsen > <torfinn.ingolfsen@getmail.no> wrote: > > Just a short update on this machine (Acer Aspire X1470) and the GPT / UEFI situation. > > Today I set up another partition, EFI system partition. The partyitions now looks like this: > > root@kg-vm2# gpart show ada0 > > => 34 250069613 ada0 GPT (119G) > > 34 128 1 freebsd-boot (64k) > > 162 119537664 2 freebsd-ufs (57G) > > 119537826 8388608 3 freebsd-swap (4.0G) > > 127926434 121634816 4 freebsd-ufs (58G) >...

>> #1. Map the physical drive slots to how they show up in FBSD so if a >> disk is removed and the machine is rebooted all the disks after that >> removed one do not have an 'off by one error'. i.e. if you have >> ada0-ada14 and remove ada8 then reboot - normally FBSD skips that >> missing ada8 drive and the next drive (that used to be ada9) is now >> called ada8 and so on... > >How do you do that? If I'm in that situation, I think I could find the >bad drive, or at least the good one...

I had a sparc64 (Netra X1) running a stable/9 from late March 2013. Actually, the kernel may've been a bit newer than that as I was working with folks to diagnose and repair some Netra-X1 specific issues. But, ZFS worked fine. I have two pools, zroot as a RAID1 (using equally sized partitions at the front of two large disks), and a zdata that is a large pool of the remaining space of both

Hi everybody. I've just upgraded a box from FreeBSD 9 to 9.1 via freebsd-update. At the first reboot, the machine stopped with messages about GRAID : GEOM_RAID: Promise: Subdisk kjihgfedcba`_^]\[ZYXWVUTSRQPONM:0-ada0 state changed from NONE to ACTIVE The trick is that I've never setup any kind of RAID on that old box... Is there a way to completely disable GEOM_RAID loading on boot ? Here are the obligatory blurry-cellphone-pictures of the boot messages : https://www.dropbox.com/s/wqgjsf1adhoaksb/boot1....

Hi, I've got a problem with booting zfs-on-root FreeBSD 9.2-PRERELEASE. I'm getting: ZFS: i/o error - all block copies unavailable ZFS: can't read MOS of pool klawisz gptzfsboot: failed to mount default pool klawisz Machine is VM running under KVM on Proxmox 2.3-13. VM has 8 GB of RAM, 400 GB of local storage with SCSI Controller type: Default (lsi). I'm not sure what I did to

...And 9.1-PRE's: (aprobe0:ahcich0:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 (aprobe0:ahcich0:0:15:0): CAM status: Command timeout (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted In both cases ada[01] are detected and available, but with 9.1-PRE I see: GEOM_RAID: Promise: Disk ada0 state changed from NONE to SPARE. GEOM_RAID: Promise: Disk ada1 state changed from NONE to SPARE. (I see the same when I # kldload geom_raid # from running 9.0, doesn't breaks anything...) I attach the full boot log with 9.1-PRE (bios with NO-raid nor AHCI enabled, but this changes nothing in...

...<HPT DISK 0_5 4.00> Fixed Direct Access SCSI-0 device da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da6 at hpt27xx0 bus 0 scbus8 target 6 lun 0 da6: <HPT DISK 0_6 4.00> Fixed Direct Access SCSI-0 device da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <OCZ-VERTEX4 1.5> ATA-9 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ahcich1 bus...

...lus kernel: da2: Serial Number???????? 14170C1AF5BA Sep 17 11:25:39 romulus kernel: da2: 600.000MB/s transfers Sep 17 11:25:39 romulus kernel: da2: Command Queueing enabled Sep 17 11:25:39 romulus kernel: da2: 488386MB (1000215216 512 byte sectors: 255H 63S/T 62260C) Sep 17 11:25:39 romulus kernel: ada0 at ata0 bus 0 scbus1 target 0 lun 0 Sep 17 11:25:39 romulus kernel: ada0: <TS32GSSD370 N1114B> ACS-2 ATA SATA 3.x device Sep 17 11:25:39 romulus kernel: ada0: Serial Number B976030532 Sep 17 11:25:39 romulus kernel: ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 1024bytes) Sep 17 11:25:39 romu...