search for: ad0

This morning I found a frozen box. On the console was this: ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done After reboot, those messages were found in /var/log/messages. I'm running FreeBSD 4.8-RC from Apr 4 10:45:49 EST 2003. Any ideas? -- Dan Langille : http://www.langille.or...

Hello, I didn't recieve a response on freebsd-mobile, so I'm trying here. I'm trying to install FreeBSD 4.7-RELEASE or 5.0-RELEASE onto my Dell Inspirion 8100. I'mjust doing a Standard installation and when FDisk loads I get: Disk name: ad0 DISK Geometry: 88 cyls/255 heads/63 sectors = 1413720 sectors (690MB) So I go and manually change the drive geometry with the G option and it shows the windows 2000 NTFS partition as 692Mb instead of 9.76Gb that it really is. I found the HD model number with Google on someone elses dmesg and got...

hi, latest changes in dev/ata broke this, on older -stable ... ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire ad0: success setting PIO4 on National chip ad0: 977MB <SanDisk SDCFB-1024 Rev 0.00> at ata0-master PIO4 on latest -stable: ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire and no disk. cheers, danny

...ntroller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=50 stat1=10 ata0-master: ATA 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ... ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <Maxtor 4D040H2/DAH017K0> ATA-6 disk at ata0-master ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 My questio...

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0 READY (master) using ad0 at ata0-master ar1: disk1 READY (mirror) using ad1 at...

...just general usage. I initially assumed that it was a loose cable and so opened the box up and re-seated the cables. After this the machine worked fine again for maybe 12 hours but then encountered the same type of errors which start with stuff along the lines of: Sep 26 05:59:35 www /kernel: ad0: READ command timeout tag=0 serv=0 - resetting Sep 26 05:59:35 www /kernel: ata0: resetting devices .. ad0: DMA limited to UDMA33, non-ATA66 cable or device After a few of these the machine stops being able to access its drives and eventually either reboots or hangs. After searching for a bit...

...#39;m stuck a bit. I tried many different ways to setup system with vinum root (the only reference I found yet besides old "bootstrapping vinum" article is Joerg's commit message: http://freebsd.rambler.ru/bsdmail/cvs-all_2003/msg01225.html I failed. I have 4-stable system set up at ad0, and tried to set up pair of drives for new system at ad2 and ad3 (actually, they will run as ad0 and ad2 on target system). What I did: - fdisk -BI ad2; fdisk -BI ad3 - disklabel -Brw auto ad2s1; disklabel -Brw auto ad3s1 - create ad[23]s1d for root, 128M+265s in size, type vinum - start vinum an...

...E controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0- 0x7 irq 0 at device 31.2 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 76319MB <ST380013AS> [155061/16/63] at ata0-master UDMA33 ad1: DMA limited to UDMA33, non-ATA66 cable or device ad1: 76319MB <ST380013AS> [155061/16/63] at ata0-slave UDMA33 I read somewhere that this message is a hoax and that the...

Hi everyone, I just finished installing FreeBSD 6 RELEASE on my Toshiba Tecra A4 laptop and the installation was fine, however, when I rebooted the machine, I don't get the boot loader screen as if the machine can not see my drive! I tried the reinstalling and ensured that I set the slice to be bootable but that didn't change anything. Not sure if this is a common issue with FreeBSD 6 on

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

...stat0=58 ostat1=50 Apr 29 01:07:45 udns kernel: ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 Apr 29 01:07:45 udns kernel: ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb Apr 29 01:07:45 udns kernel: ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> Apr 29 01:07:45 udns kernel: ad0: setting PIO4 on ROSB4 chip Apr 29 01:07:45 udns kernel: ad0: setting UDMA33 on ROSB4 chip Apr 29 01:07:45 udns kernel: acd0: setting PIO4 on ROSB4 chip Apr 29 01:07:45 udns kernel: ata0: reinit done .. Apr 29 01:07:45 udns kernel: ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=18520542 Apr 2...

...yl. 1040*- 1560*) e: 37529472 1572864 4.2BSD 2048 16384 94 # (Cyl. 1560*- 38791*) **************************************************************** I have that (to me) crypted errore message.. can anybody tell me what does that UDMA ICRC error means? May 24 19:58:30 saturn /kernel: ad0: DMA limited to UDMA33, non-ATA66 cable or device May 24 19:58:30 saturn /kernel: ad0: 9770MB <Maxtor 91021U2> [19852/16/63] at ata0-master UDMA33 May 24 19:58:30 saturn /kernel: ad1: 19092MB <Maxtor 2B020H1> [38792/16/63] at ata1-master UDMA33 May 24 19:58:30 saturn /kernel: Mountin...

Okay, so like this? PHONE1+AD0-SIP/2000 PHONE2+AD0-SIP/3000 PHONE3+AD0-SIP/4000 ALL+AD0AJAB7-PHONE1+AH0AJgAkAHs-PHONE2+AH0AJgAkAHs-PHONE3+AH0- Then you would have Exten +AD0APg- s,1,Dial(+ACQAew-ALL+AH0-,20) Is that right? I have read about the Macros but don't understand their use. Could someone provide an example?...

...ffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:001e1f3f 0..30=31 cylinders, 0..31=32 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68d000, tty 630492, net 670c92 bpf: sl0 attached bpf: faith0 attached ad0: success setting UDMA5 on VIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <MAXTOR 6L080L4/A93.0500> ATA-5 disk at ata0-master ad0: 76345MB (156355584 sectors), 155114 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=6 cblid=1 ad2: succe...

Dear friends: I decided to go out and buy the latest issue of Linux Format with the FreeBSD 6 CD. I am very glad I did. FreeBSD is tough to install, but after spending several hours I finally succeeded in doing a perfect installation. ONE BIG PROBLEM: When I removed the CD and rebooted, I got into my Windows XP (I have two separate disks, one for Windows, one of FreeBSD). There was no way to get

...50A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ad0: success setting UDMA5 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD1600BB-00DAA3/75.13B75> ATA-6 disk at ata0-master ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 Mo...

I have only one box[1] running 3 sub-systems[2] at my system, are these numbers resonsable[3]?? [1] - From dmesg (FreeBSD 6.1-RELEASE): AMD Sempron(tm) Processor 3000+ (1808.33-MHz K8-class CPU) real memory = 2080309248 (1983 MB) avail memory = 1997869056 (1905 MB) ad0: 76350MB <SAMSUNG SP0802N TK200-04> at ata0-master UDMA33 [2] The sub-systems are: 1 - A server giving adreesses of documents to be indexed 2 - A server receiving these documents and replacing (I don't add, just replaces) 3 - The indexer/parser of documents send all them to "2"...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I have recently bought a new disk (Seagate 500G, ST3500320NS). I have enabled SMART checking using the smartmontools as usual for the disk (/dev/ad6 -a -S on -s (S/../.././03|L/../../7/03) -m root). The problem is that each time the test runs I get messages like the following in /var/log/messages: Oct 26 04:54:15 35 kernel: ad6: TIMEOUT -

...nline it using ''zpool online''. see: http://www.sun.com/msg/ZFS-8000-3C scrub: none requested config: NAME STATE READ WRITE CKSUM tank1 UNAVAIL 0 0 0 insufficient replicas raidz1 ONLINE 0 0 0 ad0 ONLINE 0 0 0 ad1 ONLINE 0 0 0 ad4 ONLINE 0 0 0 ad6 ONLINE 0 0 0 raidz1 ONLINE 0 0 0 ada4 ONLINE 0 0 0 ada5 ONLINE...

...p line 2 my work line I would prefer the call I make to go out my office phone line same with if I pick up line 1 my home phone line I would prefer it go out my home line but want it to roll if needed. So with this little macro it is possible for that to happen. +AFs-macro-normal-dial+AF0- exten +AD0APg- s,1,ChanIsAvail(+ACQAew-ARG1+AH0-) +ADs- Determine what line is available in order it was sent. exten +AD0APg- s,2,Dial(+ACQAew-AVAILCHAN+AH0-/+ACQAew-MACRO+AF8-EXTEN+AH0-) +ADs- AVAILCHAN gets set from ChanIsAvail and you use MACRO+AF8-EXTEN instead of EXTEN. +AFs-line-1-outbound+AF0- +ADs- L...