search for: a16

...blem on A. So I can rule out the DTMF problem in E1. So this has to be some thing with the way E1 is getting transmitted over IAX trunk. My iax.conf in A is like: [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm jitterbuffer=no forcejitterbuffer=no [ccsrv-a16-in1] type=peer host=192.168.79.177 auth=plaintext secret=password username=a16-in1 qualify=yes trunk=yes and in B [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw jitterbuffer=no forcejitterbuffer=no transfer = no [a16-in1] type=user auth=plaintext secret=password context=in...

...nd that there are about 30 calls in B which is not disconnected. This comprise of both calls from B -> A as well as B -> C. There are no such lingering calls in A or C. Every day I manually disconnect the calls, shown below are two example with first one from B -> C and second B -> A. a16-in1*CLI> soft hangup IAX2/a16-in1-11080 Requested Hangup on channel 'IAX2/a16-in1-11080' -- Hungup 'IAX2/a16-in1-a16-q1-16420' == Spawn extension (queue, s, 20) exited non-zero on 'IAX2/a16-in1-11080' -- Hungup 'IAX2/a16-in1-11080' a16-in1*CLI> soft...

...relation I found was that when ever agents transfer calls to main menu (ie to server B) there is a load spike. This transfer again goes via same IAX trunk as the incoming. IAX conf in C is: [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw jitterbuffer=no forcejitterbuffer=no [a16-q1] type=user auth=plaintext secret=password context=inbound-calls qualify=yes trunk=yes [a16-q1-a16-in1] type=peer host=192.168.79.177 auth=plaintext secret=password username=a16-in1 qualify=yes trunk=yes IAX conf in B is: [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw jit...

...oes like C -> B -> A -> PSTN. I have an occasional problem where DTMF is not recognized, ie if clients type a digit while in menu the system does not register it. In my C server I saw a log line like this today: DTMF end '1' has duration 57 but want minimum 80, emulating on IAX2/a16-q1-9657 Is the above message an indication of this problem? How can I fix it? with regards, raj

Hi Bill, I put stringsAsFactors = FALSE still did not work. tdat <- read.table(textConnection("A B C Y A12 B03 C04 0.70 A23 B05 C06 0.05 A14 B06 C07 1.20 A25 A23 A12 3.51 A16 A25 A14 2,16"),header = TRUE ,stringsAsFactors = FALSE) tdat$D <- 0 tdat$E <- 0 tdat$D <- (ifelse(tdat$B %in% tdat$A, tdat$A[tdat$B], 0)) tdat$E <- (ifelse(tdat$B %in% tdat$A, tdat$A[tdat$C], 0)) tdat I got this, A B C Y D E 1 A12 B03 C04 0.70 0 0 2 A23 B05 C06 0...

Thank you Rui, I did not get the desired result. Here is the output from your script A B C Y D E 1 A12 B03 C04 0.70 0 0 2 A23 B05 C06 0.05 0 0 3 A14 B06 C07 1.20 0 0 4 A25 A23 A12 3.51 1 1 5 A16 A25 A14 2,16 4 4 On Wed, Dec 13, 2017 at 4:36 PM, Rui Barradas <ruipbarradas at sapo.pt> wrote: > Hello, > > Here is one way. > > tdat$D <- ifelse(tdat$B %in% tdat$A, tdat$A[tdat$B], 0) > tdat$E <- ifelse(tdat$B %in% tdat$A, tdat$A[tdat$C], 0) > > > Hope th...

Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel Boot Agent 1.3.81 (2.1 build 089). It gets network and launches lpxelinux.0, I see the PXELINUX banner line, but there it hangs. I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead use pxelinux.0 or gpxelinux.0, either 6.03-pre18 or 5.10 or 4.07, there are no...

Hi all, I have a data frame tdat <- read.table(textConnection("A B C Y A12 B03 C04 0.70 A23 B05 C06 0.05 A14 B06 C07 1.20 A25 A23 A12 3.51 A16 A25 A14 2,16"),header = TRUE) I want match tdat$B with tdat$A and populate the column values of tdat$A ( col A and Col B) in the newly created columns (col D and col E). please find my attempt and the desired output below Desired output A B C Y D E A12 B03 C04 0.70 0 0 A23 B05 C06 0....

Dear Srs, I'm getting this error when trying to connect to a Infortrend A16E- G2130-4 storage v?a iSCSI. > Apr 29 10:24:40 vz-10 kernel: scsi1 : iSCSI Initiator over TCP/IP > Apr 29 10:24:41 vz-10 kernel: Vendor: IFT Model: A16E- > G2130-4 Rev: 361F > Apr 29 10:24:41 vz-10 kernel: Type: Direct- > Access ANSI SCSI rev...

On 07/10/2014 04:07 PM, Alexander Perlis wrote: > Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel > Boot Agent 1.3.81 (2.1 build 089). It gets network and launches > lpxelinux.0, I see the PXELINUX banner line, but there it hangs. > > I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead > use pxelinux.0 or gpxelinux.0, either 6.03-pre18 or 5.10...

On 07/10/2014 06:39 PM, Gene Cumm wrote: > On Thu, Jul 10, 2014 at 7:24 PM, H. Peter Anvin <hpa at zytor.com> wrote: >> On 07/10/2014 04:07 PM, Alexander Perlis wrote: >>> Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel >>> Boot Agent 1.3.81 (2.1 build 089). It gets network and launches >>> lpxelinux.0, I see the PXELINUX banner line, but there it hangs. >> >> Could you get a packet trace from the server, to see if you see any >> traffic at all before it dies? &...

On Thu, Jul 10, 2014 at 7:24 PM, H. Peter Anvin <hpa at zytor.com> wrote: > On 07/10/2014 04:07 PM, Alexander Perlis wrote: >> Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel >> Boot Agent 1.3.81 (2.1 build 089). It gets network and launches >> lpxelinux.0, I see the PXELINUX banner line, but there it hangs. >> >> I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead >> use pxelinux.0 or gpxelinux.0, either...

...at 3:02 PM, Val <valkremk at gmail.com> wrote: > Thank you Rui, > I did not get the desired result. Here is the output from your script > > A B C Y D E > 1 A12 B03 C04 0.70 0 0 > 2 A23 B05 C06 0.05 0 0 > 3 A14 B06 C07 1.20 0 0 > 4 A25 A23 A12 3.51 1 1 > 5 A16 A25 A14 2,16 4 4 > > > On Wed, Dec 13, 2017 at 4:36 PM, Rui Barradas <ruipbarradas at sapo.pt> > wrote: > > > Hello, > > > > Here is one way. > > > > tdat$D <- ifelse(tdat$B %in% tdat$A, tdat$A[tdat$B], 0) > > tdat$E <- ifelse(tdat$B %i...

On 07/11/2014 04:31 PM, H. Peter Anvin wrote: > On 07/11/2014 10:17 AM, Alexander Perlis wrote: >> >> Trace shows that lpxelinux.0 6.03-pre18 is transferred, and after that >> there is only ARP traffic: a "gratuitous" ARP announcement by the >> client, and then a string of ARP requests and replies in which the >> client is asking for the MAC of the PXE

On Fri, Jul 11, 2014 at 5:49 PM, Alexander Perlis <aperlis at math.lsu.edu> wrote: > On 07/11/2014 04:31 PM, H. Peter Anvin wrote: >> >> On 07/11/2014 10:17 AM, Alexander Perlis wrote: >>> >>> >>> Trace shows that lpxelinux.0 6.03-pre18 is transferred, and after that >>> there is only ARP traffic: a "gratuitous" ARP announcement by

On 07/11/2014 09:39 PM, Gene Cumm wrote: > With everything else from 6.03-pre18, try this binary (xzip-compressed): > http://www.zytor.com/~genec/lpxelinux-6.03p18g3.tgz It works! Thanks! Anything else I should do/report on this hardware before I upgrade the BIOS and possibly eliminate the broken environment that exhibited the problem? Alex

...ed and I only get 85 items, not 113. Is it due to a string length limitation in R or is it a bug in the strsplit or gsub functions, or in my string? I'd very much appreciate any suggestions ============Input script: backtestFormula<-SPX~A1+A2+A3+A4+A5+A6+A7+A8+A9+A10+A11+A12+A13+A14+A15+A16+A17+A18+A19+A20+A21+A22+A23+A24+A25+A26+A27+A28+A29+A30+A31+A32+A33+A34+A35+A36+A37+A38+A39+A40+A41+A42+A43+A44+A45+A46+A47+A48+A49+A50+A51+A52+A53+A54+A55+A56+A57+A58+A59+A60+A61+A62+A63+A64+A65+A66+A67+A68+A69+A70+A71+A72+A73+A74+A75+A76+A77+A78+A79+A80+A81+A82+A83+A84+A85+A86+A87+A88+A89+A90+A91...

On 07/11/2014 10:17 AM, Alexander Perlis wrote: > > Trace shows that lpxelinux.0 6.03-pre18 is transferred, and after that > there is only ARP traffic: a "gratuitous" ARP announcement by the > client, and then a string of ARP requests and replies in which the > client is asking for the MAC of the PXE server, about every 3 seconds, > for about 2 minutes, after which I

On 07/12/2014 02:24 PM, Gene Cumm wrote: > On Sat, Jul 12, 2014 at 3:15 PM, Alexander Perlis <aperlis at math.lsu.edu> wrote: >> On 07/11/2014 09:39 PM, Gene Cumm wrote: >>> >>> With everything else from 6.03-pre18, try this binary (xzip-compressed): >>> http://www.zytor.com/~genec/lpxelinux-6.03p18g3.tgz >> >> It works! Thanks! > > Oh

...tdat$B %in% tdat$A, tdat$A[tdat$C], 0) Hope this helps, Rui Barradas On 12/13/2017 9:36 PM, Val wrote: > Hi all, > > I have a data frame > tdat <- read.table(textConnection("A B C Y > A12 B03 C04 0.70 > A23 B05 C06 0.05 > A14 B06 C07 1.20 > A25 A23 A12 3.51 > A16 A25 A14 2,16"),header = TRUE) > > I want match tdat$B with tdat$A and populate the column values of tdat$A > ( col A and Col B) in the newly created columns (col D and col E). please > find my attempt and the desired output below > > Desired output > A B C Y D E &g...