search for: a08

...0000fed00400 2 [-] reserved 9 00000000fec00000 0000000000100000 00000000fed00000 2 [-] reserved a 00000000fee00000 0000000000100000 00000000fef00000 2 [-] reserved b 00000000ffb00000 0000000000500000 0000000100000000 2 [-] reserved By contrast, with BIOS version A00 (above was A08): INT 15h = f000:f859 DOS RAM: 560K (0x8c000) INT 12h: 560K (0x8c000) INT 15 88: 0xfc00 (64512K) INT 15 E801: 0x3c00 (15360K) 0x1e68 (498176K) 0 0000000000000000 00000000000a0000 00000000000a0000 1 [-] usable 1 00000000000f0000 0000000000010000 0000000000100000 2 [-] reserved...

...086:10bd] (rev 02) ------------------------------------------------------------------ MEMDISK 4.03 does not detect internal SATA drive Note the message: "We lost the last drive in our class of drives." ------------------------------------------------------------------ OptiPlex GX620 BIOS A08, Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01) OptiPlex GX280 BIOS A08, Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01) Latitude E6400 A27, Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)...

...ode=BIOSA&productCo de=latitude-e6510&languageCode=EN&categoryId=BI [quote] Important Information 1. Please note that if the A01 BIOS is currently installed on your system you must first apply the P02 patch (E6510P02.EXE) before upgrading to this BIOS. 2. Please note that if the A08 or before A08 BIOS is currently installed on your system you must first update to A09 BIOS and then flash to the latest A-rev BIOS. 3. Please note that if the A10 or before A10 BIOS is currently installed on your system you must first update to A11 BIOS and then flash to the latest A-rev BIOS...

...ints =3D-<br> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0300 at ext-local =A0 =A0 =A0 =A0 =A0 := SIP/300 State:Idle =A0 =A0 =A0 =A0 =A0 =A0Watchers =A07<br> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0301 at ext-local =A0 =A0 =A0 =A0 =A0 := SIP/301 State:Idle =A0 =A0 =A0 =A0 =A0 =A0Watchers =A08<br> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0302 at ext-local =A0 =A0 =A0 =A0 =A0 := SIP/302 State:Idle =A0 =A0 =A0 =A0 =A0 =A0Watchers =A08<br> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0303 at ext-local =A0 =A0 =A0 =A0 =A0 := SIP/303 State:Idle =A0 =A0 =A0 =A0 =A0 =A0Watchers =A08<br...

Hello, On 23.07.2014 15:07, Ady wrote: >> Is there something I can test or help to diagnose? > > What about 6.03-pre18 (or newer)? > http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/ 6.03-pre18 is still slow: > 16:06:07.494125 IP dell.phahn.dev.49232 > xen12.phahn.dev.57501: UDP, length 4 > 16:06:07.494250 IP xen12.phahn.dev.57501 >

...estore the environment we were called with call reset_pxe . reset_pxe: or byte [KeepPXE],1 ; Fall through unload_pxe: push ds push es mov ax,cs mov ds,ax mov es,ax cmp byte [KeepPXE],0 ; Should we keep PXE around? jne do_reset_pxe ? on Dell Precision M4600 Laptops (BIOS Rev. A08) reseting the PXE stack causes a reboot and Dell Latitude E5520 laptops (BIOS Rev. A05) start over with another PXE boot (-> PXE boot cycle until not enough free memory is left over to startup syslinux). With syslinux 4.05 both laptops try to exit PXE but they will freeze before they can boot...

...y, January 25, 2011 5:23:34 PM GMT -05:00 US/Canada Eastern Subject: Re: [syslinux] MEMDISK issue with OptiPlex GX280,620 On 1/25/2011 16:38, Shao Miller wrote: > On 1/25/2011 13:36, Jason Vasquez wrote: >> Gladly yes to test, thank you. >> >> System used: OptiPlex GX280, BIOS A08. Results below. > ...It's the bogus AH == 0x15 "success" case that's hurting these > models. I will address that and submit another patch. > > Thanks for testing. Good day again, Jason. Would you be so kind as to please test: http://git.zytor.com/?p=users/sha0...

...bd_timeout=600 No device found for name MGS: Invalid argument error: conf_param: No such device It looks like I need to run this command from MGS node so I moved then to MGS server called storage03 [root at storage03 ~]# lctl dl 0 UP mgs MGS MGS 9 1 UP mgc MGC10.143.245.3 at tcp f51a910b-a08e-4be6-5ada-b602a5ca9ab3 5 2 UP mdt MDS MDS_uuid 3 3 UP lov home-md-mdtlov home-md-mdtlov_UUID 4 4 UP mds home-md-MDT0000 home-md-MDT0000_UUID 5 5 UP osc home-md-OST0001-osc home-md-mdtlov_UUID 5 [root at storage03 ~]# lctl device 5 [root at storage03 ~]# lctl conf_param obd_timeout=600...

git://git.zytor.com/users/genec/syslinux.git Branch memdiskdbg-for-sha0 This starts with adding another check in two of the disk probes (by Shao; Thank you), expands the debug output, adds an additional check in the third probe and expands/reorders the debug output. At this time, it appears to resolve the MEMDISK issues that Jason Vasquez first noticed. The additional check in the third probe

...ell until version 3.62. After the floppy image has been loaded and it starts executing DOS 7.0 (Win98), there are several error messages about DOS memory. GDISK also can't run, complaining about DOS memory. This problem can be reproduced with the following: - Dell OptiPlex GX280, BIOS version A08 (the latest/last). - pxelinux.0 version 3.62 (or later). - Menu.c32 (I can use menu.c32 from 3.62 with pxelinux.0 from 3.61). Menu example: KERNEL memdisk APPEND keeppxe initrd=images/install/w98_aterm_xp_current.IMZ I haven't seen this problem on any other machine model (3.62 or lat...

...ething wrong here, or is there a problem in adonis? Thanks, Tyler ps. Sorry for not supplying a reproducible bit of code. The data.frame is quite large. The general layout is: > head(gel_data) # additional data columns trimmed for email Site Habitat Plot Concate A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 1 PE C 1 PEC1 1 1 1 1 1 1 1 1 1 1 2 PE C 3 PEC3 1 1 1 1 0 1 1 1 1 1 3 PE C 4 PEC4 1 1 1 1 0 1 1 1 1 1 4 PE C 6 PEC6 1 1 1 1 0 1 1 1 1 1 5 PE C...

...m: Maarten Maathuis <madman2003 at gmail.com> >> Date: Sun, 3 Jan 2010 02:14:36 +0100 >> Subject: [PATCH] exa: Some compat defines for depth 30 formats. >> >> Signed-off-by: Maarten Maathuis <madman2003 at gmail.com> >> --- >> =A0src/nv50_exa.c | =A0 =A08 ++++++++ >> =A01 files changed, 8 insertions(+), 0 deletions(-) >> >> diff --git a/src/nv50_exa.c b/src/nv50_exa.c >> index 10a3a64..c558896 100644 >> --- a/src/nv50_exa.c >> +++ b/src/nv50_exa.c >> @@ -431,6 +431,14 @@ NV50EXAUploadSIFC(const char *src, in...

The problem is that R crashes with an exception "R for Windows GUI front-end has encountered a problem and needs to close..." It doesn't always crash, but almost always does. Thanks for any help (fixes, workarounds, or diagnostics) you can provide! Doug Specs: PC: HP 2710p Graphics HW: Mobile Intel 965 Express Chipset Family / Graphics Media Accelerator X3100 Graphics Driver:

A kind request for help please. MEMDISK is causing an issue with the Dell OptiPlex GX280 and GX620 platforms. Booting a PC-DOS/Ghost, disk image is successful (and proper) when using version 3.83. See results below: MEMDISK 3.83: Ramdisk at 0x07eeaa00, length 0x007bc000 command line: initrd=images/ghostclient/280_620/osbootc.img BOOT_IMAGE=memdisk MEMDISK: Image seems to have fractional end

...101974a>] default_do_nmi+0x4a/0x140 Jul 21 10:11:42 dioo-XPS kernel: [ 2185.090411] [<ffffffff810198c8>] do_nmi+0x88/0xc0 Jul 21 10:11:42 dioo-XPS kernel: [ 2185.090413] [<ffffffff817d22af>] end_repeat_nmi+0x1e/0x2e Jul 21 10:11:42 dioo-XPS kernel: [ 2185.090415] [<ffffffff817cfa08>] ? _raw_spin_lock_irqsave+0x48/0x80 Jul 21 10:11:42 dioo-XPS kernel: [ 2185.090417] [<ffffffff817cfa08>] ? _raw_spin_lock_irqsave+0x48/0x80 Jul 21 10:11:42 dioo-XPS kernel: [ 2185.090418] [<ffffffff817cfa08>] ? _raw_spin_lock_irqsave+0x48/0x80 Jul 21 10:11:42 dioo-XPS kernel: [ 21...

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking

Hey Richard, Could you share the following informations please? 1. gluster volume info <volname> 2. getfattr output of that file from all the bricks getfattr -d -e hex -m . <brickpath/filepath> 3. glustershd & glfsheal logs Regards, Karthik On Thu, Oct 26, 2017 at 10:21 AM, Amar Tumballi <atumball at redhat.com> wrote: > On a side note, try recently released health

On a side note, try recently released health report tool, and see if it does diagnose any issues in setup. Currently you may have to run it in all the three machines. On 26-Oct-2017 6:50 AM, "Amar Tumballi" <atumball at redhat.com> wrote: > Thanks for this report. This week many of the developers are at Gluster > Summit in Prague, will be checking this and respond next

...(7283e4f8-7e1b-4cac-8f02-2503b0391f74) on home-client-2 [2017-10-25 10:14:04.764764] W [MSGID: 108015] [afr-self-heal-entry.c:56:afr_selfheal_entry_delete] 0-home-replicate-0: expunging file a3f5a769-8859-48e3-96ca-60a988eb9358/E56F0D7F35079531E3AD1E5555E283E0F7353895 (c4286375-807d-4363-a0e6-31b00a0899b0) on home-client-2 [2017-10-25 10:14:04.789936] W [MSGID: 108015] [afr-self-heal-entry.c:56:afr_selfheal_entry_delete] 0-home-replicate-0: expunging file a3f5a769-8859-48e3-96ca-60a988eb9358/ACD899A34EBDD4C3E9F3EA11D82251CC91BEE8A6 (97377aaa-4c6c-4114-b16e-044e3007891c) on home-client-2 [2017-10...