search for: 99mbit

Thank you Andy! I did''t find why I could''t use the fw match in ingress. Now it works. Now I ran into another problem: When I try to add a pfifo_fast leaf qdisc dor htb classes it seg.-faults. Is pfifo_fast a special qdisc? I can succesfully add other type of qdiscs. I found that a similar problem was reported in february on a MIPS architecture. root@zefir:/usr/src# tc qdisc

I have a router with 3 network interfaces like in the following ASCII diagram below. All interfaces are 100mbit. There is tcp traffic being sent from net1 to net3 and from net2 to net3 and the tcp connections consume as much bandwidth as possible. There is a pfifo queue on the egress interface eth0 of the core router with a limit of 10 packets. net1 --> (eth1) router (eth0) -> net3

Im using a Linux machine with standard pc hardware with 3 seperate PCI network interfaces to operate as a DiffServ core router using Linux traffic control. The machine is a P4 2.8ghz, 512mb RAM running fedora core 3 with the 2.6.12.3 kernel. All links and network interfaces are full duplex fast ethernet. IP forwarding is enabled in the kernel. All hosts on the network have their time sychronised

Hi All, I want to setup a machine to connect to internet at a limited rate of 64 kbps. That machine is connected to a switch. so my LAN and Internet both comes from the same eth0. How can I limit only the internet access from this machine to 64kbps and still using 100mbps for LAN I am trying to implement this Please guide me If i am wrong. I mark all the packets going out to LAN. Then I can