search for: 88e8053

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

...82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:02.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20) 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20) 05:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GT/GTO] (rev a1) -- Michael __________________________________________...

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

...he server was reset while the page was loading", lynx just says "HTTP/1.1 200 OK" and displays no data, etc. I'm also using Linux and Windows XP on the same machine, and the same sites are loaded very quickly. Note I'm not using a proxy. My NIC is: mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 17 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0 msk0: Ethernet address: 00:11:2f:37:d5:19 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY...

...all pv_ops) dom0: kernel-PAE-2.6.31.9-1.2.82.xendom0.fc12.i686.rpm (from http://fedorapeople.org/~myoung/dom0/i386/) domU: kernel-PAE-2.6.31.12-174.2.3.fc12.i686.rpm xen: xen-hypervisor-3.4.2-1.fc12.i686.rpm Hardware: Pentium 4 without any virtualization support peth0: on board PCI-E Marvell Yukon 88E8053 (driver sky2) peth1: PCI Intel Pro/1000GT (driver e1000) I can reproduce this 100%. Turning off tx chksumming (eththool -K {dev} tx off) on all devices in dom0 and domU does not help. I would be happy if someone can give me a hint, if there is any fix available, either by configuration settings o...

...PMs and rebooted, and lo and behold, my other onboard NIC is now detected, after a fashion. /etc/sysconfig/hwconf now has entries for: device: eth0 driver: forcedeth desc: "nVidia Corporation CK804 Ethernet Controller" device: eth2 driver: sky2 desc: "Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller" The device/desc lines for both were always there, but previously the device now identified as eth2 had neither a driver assigned nor a recognized hwaddr, and if I disabled either device in the BIOS, then the remaining enabled device would take on the same driver/h...

hi guys i'm trying to setup the isp config and this is what i am getting in the terrimal # Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller DEVICE=eth0 BOOTPROTO=dhcp HWADDR=00:16:E6:80:6D:5F ONBOOT=yes "/etc/sysconfig/network-scripts/ifcfg-eth0:0" 5L, 137C where it should look like this # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]DEVICE=eth0:0BOOTPROTO=staticBROADCAST=192.168...

Hi, after upgrading to Asterisk 1.2.8 from 1.2.7.1 I got a problem with Grandstream BT100 after making an attended transfer (FLASH + NUMBER + SEND + WAIT ANSWER + TRANSFER). After the transfer, the display clears all the info except the clock, there is no dial tone, the WEB admin stops working. Incoming calls make the display light turn on but there is no ring and no callerid on the

I did post to ovirt-devel but I am not a registered user, so a moderator need to review my posting before it becomes available. I will register, but right now I only have a few seconds to spare. I try to add use "Add Virtual Machine" but the "Storage" is empty. My iSCSI and NFS storage says "State: pending_setup". What am I doing wrong? Sincerely, /bs66

Hi, I''ve setup a box with xen. For the root machine, it''s ok, it see the network card: alian@yoda:~> /sbin/lspci ... 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 19) alian@yoda:~> lsmod .... sk98lin 208748 1 alian@yoda:~> /sbin/ifconfig eth0 Lien encap:Ethernet HWaddr 00:15:F2:39:D4:DF inet adr:10.1.1.158 Bcast:10.1.1.255 Masque:255.255.255.0 adr inet6: fe80::215:f2ff:fe3...

I'm completely stumped by this problem and I've tried everything at present - including installing dovecot from scratch. The problem is that when trying to get email from the server -AND- there's email in the account, the pop3 or imap process freezes and no email is fetched. The crazy thing is, that it has been working perfectly, but suddenly I'm getting these freezes both