search for: 82801ba

...ridge (rev 4). Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 4). Master Capable. Latency=64. Min Gnt=14. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 5). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 5). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801BA IDE U100 (rev 5). I/O at 0xf000 [0xf00f]. Bus 0...

...an) e100 69272 1 reiserfs 158816 1 Here is the output of lspci: 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 05) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 05) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05) 00:1f.4 USB Controller: Inte...

...st Bridge (MCH) (rev 04) 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) 00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04) 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04) 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (re...

...channel 1. lspci: 00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 05) 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05) 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 05) 00:1f.4 USB Controller: Intel Corporation 8...

...DAA, giving up... Zapata Telephony Interface Unloaded [prompt]# lspci 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 11) 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 11) 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03) 00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03) 00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03) 00:1f.4 USB Controlle...

I am getting quite frustrated today, so please bear with me. I just installed Fedora Core 4 (was running RedHat 9 with a working Asterisk) now my Fedora does not appear to be recognizing my X100P (clone) at all. Hardware browser just shows them as unknown device. driver: hisax So, of course, my zaptel drivers do not work and therefore my asterisk does not work. any help would be greatly

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

...kernel: pcib0: <Host to PCI bridge> on motherboard Sep 5 16:18:10 polo /kernel: pci0: <PCI bus> on pcib0 Sep 5 16:18:10 polo /kernel: agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 Sep 5 16:18:10 polo /kernel: pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0 Sep 5 16:18:10 polo /kernel: pci1: <PCI bus> on pcib1 Sep 5 16:18:10 polo /kernel: pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11 Sep 5 16:18:10 polo /kernel: pcib2: <Intel 82801BA/BAM (ICH2) Hub to...

...ry Controller Hub (rev 2). Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 2). Master Capable. Latency=32. Min Gnt=12. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 1). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 1). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801BA IDE U100 (rev 1). I/O at 0xf000 [0xf00f]. Bus...

Hello! I have an old Dell Latitude C800 laptop (with Pentium3 CPU in it). FreeBSD 6.3-STABLE was running fine on it, but I decided to update the machine to 9.1-STABLE. Well, neither my own custom kernel, nor even the official 9.1-RELEASE CD1 would boot... In both cases the boot process runs up to detecting uhub0, then either hangs forever or shuts off after a short while. Again, I thought I

...: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 12 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0x9000-0x90ff mem 0xd9000000-0xd90000ff irq 11 at device 3.0 on pci2 rl0: Ethernet address: 00:50:ba:60:7b:83 miibus0: <MII bus> on rl0 rlphy0: <RealTek...

...=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: d0000000-d7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0...

...SHA1 Hi all, I don't know if this is the right list, but here goes what happened recently to me. I have an IDE disk (hda: QUANTUM FIREBALLP AS20, ATA DISK drive / hda: 39851760 sectors (20404 MB) w/1902KiB Cache, CHS=2480/255/63, UDMA(100)) connected to 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) I've decided to make a partition, so I've fired up fdisk and make a new one (hda7) of 4GB, as you can see in this line: /dev/hda7 1170 1679 4096543+ 83 Linux Then I've run mke2fs -j /dev/hda7, mounted it, copied data to it, umount it. I've no...

...9;ve loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01) # lsusb Bus 001 Device 003: ID 09ae:3012 Tripp Lite Bus 001 Device 001: ID 0000:0000 However, the tripplite_usb driver doesn't seem to find the UPS: # tripplite_usb -u root -DDDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning:...

...tal 21140A Fast Ethernet> port 0xc400-0xc47f mem 0xe5010000-0xe501007f irq 11 at device 5.0 on pci2 Apr 6 23:02:12 dev /kernel.keep: de0: DEC DE500-AA 21140A [10-100Mb/s] pass 2.0 Apr 6 23:02:12 dev /kernel.keep: de0: address 00:00:f8:02:fc:b2 Apr 6 23:02:12 dev /kernel.keep: isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 Apr 6 23:02:12 dev /kernel.keep: isa0: <ISA bus> on isab0 4.8 Apr 6 23:00:39 dev /kernel: pci2: <PCI bus> on pcib2 Apr 6 23:00:39 dev /kernel: pci2: <SiS 6326 SVGA controller> at 1.0 Apr 6 23:00:39 dev /kernel: pci2: &lt...

...########### the "tftp: client does not accept options" doesn't seem to be a problem as it is generated on RHEL4 servers & the pxe booting still WORKS. Enviroment details: OS: RHEL5 KERNEL: Kernel 2.6.18-8.el5 SERVER: tftp-server-0.42-3.1.i386.rpm NIC: INTEL 82801BA/CA # server THanks in advance Roger

...Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 MxC= h=3D 2 B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0 D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1 P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06 S: Manufacturer=3DLinux 2.6.10 uhci_hcd S: Product=3DIntel Corp. 82801BA/BAM USB (Hub #2) S: SerialNumber=3D0000:00:1f.4 C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Dc0 MxPwr=3D 0mA I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver= =3Dhub E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=...

...XT-PIC keyboard 2: 0 XT-PIC cascade 3: 1853793865 XT-PIC wcfxo 4: 1853787231 XT-PIC wcfxo 8: 2 XT-PIC rtc 9: 0 XT-PIC acpi 10: 0 XT-PIC Intel 82801BA-ICH2 12: 57674469 XT-PIC eth0, PS/2 Mouse 14: 2097777 XT-PIC ide0 15: 10619 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 The wcfxo's are clearly allocated their own INT but can something else me...

...Controller (rev 02) 00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02) 00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) 00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 0a) 00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02) 04:03.0 VGA compatible controller...

...range 32, base 00000000, size 3 map[1c]: type 1, range 32, base 00000000, size 2 map[20]: type 1, range 32, base 0000f000, size 4 pci0: <PCI bus> on pcib0 pci0: <Intel model 2562 VGA-compatible display device> (vendor=0x8086, dev=0x2562) at 2.0 irq 11 pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 <<< hang here >>> -------------- next part -------------- ok boot -sv SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=02 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 le...