search for: 82801

Hi. I had to replace a disk that was part of a mirrored pare attached to "Intel Corporation 82801 SATA RAID Controller" At boot the raid bios says that the rebuild with take place within the OS. Bit disk activity seems very low. How can I tell the progress of the rebuild ? Thanks G

I have installed 5.2 on my work desktop and everything works perfectly EXCEPT the sound device. Here is the relevant lspci line: 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) I tried looking in Google (might have been a bad search), but all I could find was to add acpi=on to my boot line in grub.conf, and that didn't do any good. The volume control shows muted and I can't enable it. What am I...

...install ed CentOS 5.2 x86_64 on it. It has the following spec: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz 4GB ECC memory 4 x 250GB SATA hard disks running at 1.5GB/s Onboard RAID controller is enabled but at the moment I have used mdadm to configure the array. RAID bus controller: Intel Corporation 82801 SATA RAID Controller For a simple striped array I ran: # mdadm --create /dev/md0 --level=0 --raid-devices=2 /dev/sdb1 /dev/sdc1 # mke2fs -j /dev/md0 # mount -t ext3 /dev/md0 /mnt Attached are the results of 2 bonnie++ tests I made to test the performance: # bonnie++ -s 256m -d /mnt -u 0 -r 0 a...

...orrectly this ethernet device? This are the data that I have: # lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (IC...

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...ernel is 2.6.9 asterisk is 1.2.19-BRIstuffed-0.3.0-PRE-1y-h # lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev...

...965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family)...

...peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02) 0000:00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) 0000:00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02) 0000:03:02.0 Ethernet controller: I...

...n 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:01.5 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:01.6 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family)...

...anyway. I created a new LV as I wished, just this message keeps me thinking... Should I care? Should I fix it? Is it a true RAID board? Should I be better off going software-RAID 1? lspci says 00:00.0 Host bridge: Intel Corporation Server DRAM Controller 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family)...

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm

...ly PCI Express Root Port 1 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (r...

...', ''00:1d. 7'', ''01:00.0'' ] # Output of `lspci`: 00:00.0 Host bridge: Intel Corporation 955X Express Memory Controller Hub (rev 81) 00:01.0 PCI bridge: Intel Corporation 955X Express PCI Express Root Port (rev 81) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (...

...PCI Express Root Port 1 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation C204 Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller...

....fc12.i686 below is lspic and lscpu output, root@xen avinash]# lspci 00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family)...

....fc12.i686 below is lspic and lscpu output, root@xen avinash]# lspci 00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family)...

I think I finally have nailed down the problems with TFTP on the 4.10 branch, and so I have released 4.10-pre20. Please let me know if you have hardware on which 4.05/4.06-pre3 works, and 4.10-pre20 does not. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

...00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series >> Chipset Family PCI Express Root Port 5 (rev b5) >> 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series >> Chipset Family USB Enhanced Host Controller #1 (rev 05) >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) >> 00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC >> Controller (rev 05) >> 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series >> Chipset Family SATA AHCI Controller (rev 05) >> 00:1f.3 SMBus: Intel Corporation 6 Series/C...