search for: 82540em

I'm a little new to CentOS and very rusty on Linux in general (it's been 7 years since I worked on a Linux kernel), so this may seem like a dumb question. I have two issues with my machine - sound and video. My sound card is not recognized at all (I think it's on the mobo, but I'm not sure how to identify it), and I have an ATI dual video card with two screens, but both show

Hi all, I have what appears to be a truly puzzling problem. I've got this P4 32-bit machine running CentOS 5.5 with XEN that has two NICs: one onboard, an Intel Corporation 82540EM Gigabit and one on an expansion card, Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit. The second one is recognized as eth1. What's happening is, it is showing up under one of the two MAC's: either 00:0a:cd:1a:c1:71 or 00:00:00:00:c1:71. If you reboot it the MAC stays the same; if you shu...

...5</parent> <driver> <name>e1000</name> </driver> <capability type='pci'> <domain>0</domain> <bus>7</bus> <slot>0</slot> <function>0</function> <product id='0x100e'>82540EM Gigabit Ethernet Controller</product> <vendor id='0x8086'>Intel Corporation</vendor> <iommuGroup number='2'> <address domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> <address domain='0x0...

...e default configuration (downloaded with yum) and FC5. Here is the lpsci: lspci | grep Ethernet 02:01.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10) 02:02.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15) 02:0c.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) and here is the script to bind/unbind: #!/bin/sh # ifdown eth0 ifdown dev1804289383 echo -n 0000:02:02.0 > /sys/bus/pci/drivers/sundance/unbind echo -n 0000:02:02.0 > /sys/bus/pci/drivers/pciback/new_slot echo -n 0000:02:02.0 > /sys/bus/pci/drivers/p...

...t; ../openbios/openbios-ppc 28 Dec 14 13:16 openbios-sparc32 -> ../openbios/openbios-sparc32 28 Dec 14 13:16 openbios-sparc64 -> ../openbios/openbios-sparc64 27 Dec 14 13:16 ppc_rom.bin -> ../openhackware/ppc_rom.bin 37 Dec 14 13:16 pxe-e1000.bin -> ../../lib/etherboot/e1000-82540em.rom 26 Dec 14 13:16 pxe-ne2k_isa.bin -> ../../lib/etherboot/ne.rom 31 Dec 14 13:16 pxe-ne2k_pci.bin -> ../../lib/etherboot/rtl8029.rom 31 Dec 14 13:16 pxe-pcnet.bin -> ../../lib/etherboot/pcnet32.rom 31 Dec 14 13:16 pxe-rtl8139.bin -> ../../lib/etherboot/rtl8139.rom 34 De...

...t; ../openbios/openbios-ppc 28 Dec 14 13:16 openbios-sparc32 -> ../openbios/openbios-sparc32 28 Dec 14 13:16 openbios-sparc64 -> ../openbios/openbios-sparc64 27 Dec 14 13:16 ppc_rom.bin -> ../openhackware/ppc_rom.bin 37 Dec 14 13:16 pxe-e1000.bin -> ../../lib/etherboot/e1000-82540em.rom 26 Dec 14 13:16 pxe-ne2k_isa.bin -> ../../lib/etherboot/ne.rom 31 Dec 14 13:16 pxe-ne2k_pci.bin -> ../../lib/etherboot/rtl8029.rom 31 Dec 14 13:16 pxe-pcnet.bin -> ../../lib/etherboot/pcnet32.rom 31 Dec 14 13:16 pxe-rtl8139.bin -> ../../lib/etherboot/rtl8139.rom 34 De...

...r is that totally unrelated to the problems I'm experiencing). I've also tried using a Samba PDC config from the HOWTO rather than my own hand-crafted one (see below for both). Samba version is 3.0.23d running on 2.6.17-2-686 Debian etch on Dell Poweredge 1600sc with an Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02). I have a djbdns dhcp server on the network serving which references the samba server as a wins server. Thanks, -stephen Original PDC config [global] workgroup = XXXXX netbios name = XXXX server string = %h server (Samba %v) log file = /var/log/...

...which is attempted to be downloaded. Right after loading it, the client says it can't read that file. The boot screen looks like this: iPXE 1.0.0+git-20141004.86285d1-1 -- Open Source Network Boot Firmware -- http://ipxe.org Features: HTTP DNS TFTP EFI Menu net0: 52:54:00:12:34:56 using 82540em on PCI00:03.1 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Configuring (net0 52:54:00:12:34:56)...... ok net0: 192.168.88.51/255.255.255.192 gw 192.168.88.4 Next server: 192.168.88.4 Filename: EFI64/syslinux.efi tftp://192.168.88.4/EFI64/syslinux.efi... ok Failed to read blocks: 0xC It does no...

...+-1d.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 +-1e.0-[0000:04]--+-00.0 Intel Corporation 82540EM Gigabit Ethernet Controller | \-02.0 VIA Technologies, Inc. IEEE 1394 Host Controller +-1f.0 Intel Corporation 82801IB (ICH9) LPC Interface Controller \-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller So how do I know which controll...

Hi all, Currently we have severe problem and are struggling to investigate it. The problem is data broken. Reproduce pocess is following, 0. test FTP function between guest domain and FTP client(other PC). 1. put data from FTP client to guest domain. 2. get data from guest domain to FTP client. 3. compare put data and get data on FTP client. 4. repeat process from step1 to step3.

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Hello, I sent the following message to the Debian folks. They don't think that the Debian packaging could be responsible for the issue described there. > Well, I'm not completely convinced that we will have very useful input > for you. I don't really see any reason for this to be caused by the > Debian packaging. To check this, why not compile samba from sources,

...0.0hz GLX Renderer: Chromium GLX Version: 2.1 Chromium 1.9 Direct Rendering: Yes Audio: Card Intel 82801AA AC'97 Audio Controller driver: snd_intel8x0 ports: d100 d200 bus-ID: 00:05.0 Sound: Advanced Linux Sound Architecture v: k3.19.0-32-generic Network: Card: Intel 82540EM Gigabit Ethernet Controller driver: e1000 v: 7.3.21-k8-NAPI port: d240 bus-ID: 00:08.0 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> Drives: HDD Total Size: 131.7GB (56.5% used) ID-1: /dev/sda model: VBOX_HARDDISK size: 131.7GB Partition: ID-1: / size...

...ignalling = pri_cpe context=from-pstn group = 1 channel => 1-15,17-31 # lspci -vb 00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 01) Flags: fast devsel 00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge Flags: fast devsel 00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Dell PowerEdge 600SC Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10 Memory at fe100000 (32-bit, non-prefetchable) I/O ports at ecc0 Capabilities: [dc] Power Management version 2 Capabilities...

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

Hi! I''ve 5 DSL routers and a linux router in a switch. The linux router is doing NAT for a LAN network, but it freezes when I set up load balancing with this command: ip route add default proto static\ nexthop via 192.168.1.10 dev eth1\ nexthop via 192.168.1.20 dev eth1\ nexthop via 192.168.1.30 dev eth1\ nexthop via 192.168.1.40 dev eth1\ nexthop

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

Hi Everyone, Does anybody have any experience using pfSense on Xen? I would most probably have to use HVM... My idea would be to use PCI-Passthrough to the pfsense DomU, and only make the Dom0 accessable via the pfsense firewall Thanks Jonathan _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello, I''ve recently installed a hvm domU opensuse 11 guest and I cannot set the screen resolution higher then 640x480. This seems very strange to me, because I don''t have any problem to set higher resolution on a windows 7 domU, using the following parameters in the configuration file: stdvga=1 videoram=16 What could the problem be? Is some video driver missing? -- Flavio

Hello, I''ve recently installed a hvm domU opensuse 11 guest and I cannot set the screen resolution higher then 640x480. This seems very strange to me, because I don''t have any problem to set higher resolution on a windows 7 domU, using the following parameters in the configuration file: stdvga=1 videoram=16 What could the problem be? Is some video driver missing? -- Flavio