search for: 8168b

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system kno...

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the ni...

...years I have been a happy samba user, running samba on Redhat / FC platforms. Recently I upgraded hardware, and Samba hasn't been performing well at all.. which makes me sad :-( The new hardware is Asus P5B board with a dual-core intel processor. This board has an onboard Realtek RTL8111/8168B gigabit ethernet controller, which was a hassle to setup. FC6 default kernel 2.6.18-x doesn't have drivers for it. Upgrading to the latest kernel 2.6.19-1 fixed that. Since then I have verified that both web and ftp servers are functioning normally. I use apache 2.2.3-5 and vsftpd 2.0.5-...

Hi all, I'm seeing slow transfers to/from my samba server. I just tried to copy a 270MB file from a samba share to an XP machine. At first, the estimated time displayed as 141 minutes :( The odd thing is that if I then flood-ping from the server (in this case, I pinged my dsl router), the transfer completes in about 10 seconds. Hitting F5 repeatedly when browsing a share on the server

...heck out the configure managment interface settings i see the NIC, and it states connected. But there is no way to get a IP adres true DHCP. Also when i enter a valid static configuration, i can''t seem to ping my laptop. When i downgrade back to 0.5 it works fine. It''s a: RTL8111/8168B PCI express Gigabit Ethernet controller. Any idea''s/pointers? Thanks! Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...nage debian XEN virtual servers ii xen-utils-3.0.3-1 3.0.3-0-4 XEN administrative tools ii xen-utils-common 3.0.3-0-2 XEN administrative tools - common files lspci | grep -i eth 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) [1] 02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [2] 02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [3] [1] This is the adapter attached to the local network...

...exCopII DVB chip / Technisat SkyStar2 DVB card | \-09.0 Philips Semiconductors SAA7146 +-09.0 nVidia Corporation MCP65 IDE +-0a.0 nVidia Corporation MCP65 AHCI Controller +-0c.0-[0000:02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller +-0e.0-[0000:03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration +-18.1 Advance...

...HVM domu. I have window XP as a HVM domu and xen-4.0. dom0 and domU (without device assign) works fine. I have more than one NIC card. I want to passthrough 03:00.0 to domu here are the list of my nic cards: lspci | grep -i eth 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gig...

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right detect...

Hi, I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after booting, re0 works for only a short time, then gives "re0: PHY read failed" over and over. Does anyone have a suggestion on how to debug? Thanks, Steve

...Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) ...but Realtek provided a 2.6-kernel compatible r8168-driver; r8168-8.006.00 When the CentOS 5.2 updates were published, I saw to my happiness that the kernel-supplied r8169-driver now handled the NIC, and I had no reason to rebuild the r8168-dr...

...mmunity Here by I request some help, now Install Centos 5.0 in DELL 3020 one machine installation took correctly, but after installation I find that the network card that brings integrated computer does not recognize the eth0. 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, fast devsel, latency 0, IRQ 50 I/O ports at b000 [size=256] Memory at e1510000 (64-bit, prefetchable) [size=4K] Memory at e1500000 (64-bit,...

...cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) I also put in an Intel e1000 card in each box and it works. I booted off a live Ubuntu 10.04 CD and both network cards worked beautifully. I booted up on a CentOS 5.5 DVD and went into Rescue mode and both cards worked. Is this a driver issue with X...

HI again, This is the solution to my problem, hope it helps someone in the future. First of all, thanks to Ramachandran Radhakrishnan for helping me with this. The problem was my NIC: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) What happens, is that the NIC''s driver sets the HWADRRESS = FE:FF:FF:FF:FF:FF, and that''s the same address used in xenbr0 What you need to do, is set the address manually. in Centos you can do this by setting /etc/sysconfig/networ...

Hi, I have a really strange problem with a driver disk (http://wiki.centos.org/HardwareList/RealTekRTL8111b) on amd64. I'm remotly booting the system via isolinux-files, so I unfortunatly do not have access to relevant logs, all I can see the the primary console/screen. With i386, the driver disk works just fine and I can install via http. But with amd64, the installer complains no driver

I am trying to transport a dd image between to hosts over a cross linked gigabit connection. Both hosts have an eth1 configured to a non routable ip addr on a shared network. No other devices exist on this link. When transferring via sftp I received a stall warning. Checking the logs I see this: dmesg | grep eth e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:f2:1f:bb

I was trying to do some performance testing between using iSCSI on the host as a diskfile to a guest vs the VM guest using the iSCSI device directly. However, in the process of trying to establish a baseline performance figure, I started increasing the MTU settings on the PCI-express NICs with RTL8168B chips. First bottleneck was discovering the max MTU allowed on these is 7K instead of 9K but googling seems to indicate that the RTL8168B is only capable of 4K frames. I assumed 4K would still be better than nothing but unfortunately bumping up the MTU to anything else but 1.5K caused the file tr...

...dd a virtual interface. It's got something to do with the NIC ordering or with the xen network script having a problem with multiple NICs and virtual interfaces. I could need some help/comments on this. Some history: I added a NIC (chip identifies as Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet) to a Dell R200 server. CentOS 5.3 with Xen 3.3.1 (gitco repo). eth0 and eth1 are the built-in NICs, this is then eth2 (or it should be). Works. Everything is fine until I add a virtual interface to eth0 and reboot. I can add eth0:1 at runtime just fine. But if I let...

...manage Xen virtual servers ii xen-utils-4.0 4.0.1-1 XEN administrative tools ii xen-utils-common 4.0.0-1 XEN administrative tools - common files ii xenstore-utils 4.0.1-1 Xenstore utilities for Xen root@omega:~# lspci (...) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) root@omega:~# cat /etc/default/grub # If you change this file, run ''update-grub'' afterwards to update # /boot/grub/g...

...03] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710] 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) == END lspci -nn ==