search for: 8111e

One last shot in the dark: what if you reboot the router in front of the node in question? Sometimes it was surprised, when managing different mac addresses on the same adapter. I might be missing some parts, but did the mobo work before? Best regards Zoran

...; rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 0 int 16, address 00:18:7d:2a:f1:1c rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb2 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 0 int 16 pci3 at ppb2 bus 3 re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 0 i...

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

...t; ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), apic 0 int 16, address 00:18:7d:2a:f1:1c > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 > ppb2 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 0 int 16 > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E...

Hi, I'm trying to boot 64bit version of syslinux.efi through network. But booting is freezes with following message: Getting cached packets My IP is X.X.X.X the last file that was requested through tftp is syslinux.efi. I'm using precompiled binary from official syslinux-6.02.tar.gz. Here is the dump in ASCII - http://brom.in/dumps/syslinux-20131220.txt Any help is appreciated.

Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth. Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported. Example: GIGABYTE GA-970A-DS3, does not work with linux I tried disabling the onboard NIC and using a PCI-E intel card I always use and that would not work either. The north or south bridge

...Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:04:00.0: setting latency timer to 64 alloc irq_desc for 43 on node -1 alloc kstat_irqs on node -1 r8169 0000:04:00.0: irq 43 for MSI/MSI-X r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc90007d9e000, 14:da:e9:b3:99:b9, XID 0c200000 IRQ 43 r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 EXT3-fs (md2): warning: maximal mount count reached, running e2f...

...hernet driver 2.3LK-NAPI loaded > [ 1.482910] ahci 0000:00:11.0: version 3.0 > [ 1.483020] r8169 0000:02:00.0: irq 46 for MSI/MSI-X > [ 1.483144] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps > 0xf impl SATA mode > [ 1.483256] r8169 0000:02:00.0 eth0: RTL8168e/8111e at > 0xffffc90010e66000, e8:de:27:01:f6:19, XID 0c200000 IRQ 46 > [ 1.483257] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 > bytes, tx checksumming: ko] > [ 1.483275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.483500] r8169 0000:05:00.0: irq 47 for MSI/MS...

....482331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.482910] ahci 0000:00:11.0: version 3.0 [ 1.483020] r8169 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.483144] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.483256] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90010e66000, e8:de:27:01:f6:19, XID 0c200000 IRQ 46 [ 1.483257] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.483275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.483500] r8169 0000:05:00.0: irq 47 for MSI/MSI-X [ 1.483671] r8169...

Include logs from the failed boot On Jun 11, 2015 10:55 PM, "Andre Campos Rodovalho" < andre.rodovalho at gmail.com> wrote: > Hello, I'm facing issues with a Point of View GT210/218 and nouveau > drivers. I'm using ubuntu server with LXDE on top of it... > > *lshw -c video* output: > *-display > description: VGA compatible controller >

...838] xen: registering gsi 17 triggering 0 polarity 1 Jul 16 12:54:41 placka kernel: [ 2.425847] Already setup the GSI :17 Jul 16 12:54:41 placka kernel: [ 2.425996] r8169 0000:04:00.0: setting latency timer to 64 Jul 16 12:54:41 placka kernel: [ 2.427062] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc90000c3e000, 54:04:a6:d1:0e:f3, XID 0c200000 IRQ 290 Jul 16 12:54:41 placka kernel: [ 2.427069] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] Jul 16 12:54:41 placka kernel: [ 2.456730] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 T...