search for: 802.1x

Hi, Is anyone aware of a wired sip hardphone supporting 802.1x authentication ? I've been told some Avaya and Alcatel ip phones supported 802.1x. As 802.1x is widely used with wireless hardphones, I'm wondering whether or not, 802.1x could also be valuable for wired environments. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello to all I would like to know If some of you have already configured an Cisco IP Phone (7940 or 7960) to work in a different VLAN than the PC that is connected through the phone switch? I know that this can be done with the Skinny firmware, but I dont if it works with the SIP firmware. The Cisco technical staff told me that these phones dont support 802.1x but can work as pass-through.

Does anyone know if sip phones from any of the major IP phone vendors support 802.1x authentication? Any feedback would be greatly appreciated. Thanks in advance. ====================== Jeronimo Romero EUS Networks Email: jromero at euscorp.com Cell: 917-332-7238 Office: 212-624-5943 Web: www.euscorp.com ====================== -------------- next part -------------- An HTML

Cisco phones act a as a switch. If you do not use the CDP protocol to "tell" the phone it needs to be in a special VLAN (802.1q) then it will just use the access port settings on the switch, and, also allow the PC connected to the 2nd Ethernet port to have access to the network. However, if you have an all cisco powered network, with all cisco phones, I could advise you to use the CDP

Hi. Is there a 802.1x implementation (client and server) for FreeBSD -STABLE? Sam -- Samuel Tardieu -- sam@rfc1149.net -- http://www.rfc1149.net/sam

On a 802.1X environment, it's possible to permit a windows desktop gain access to the network by using only machine authentication at the Active Directory (no need for login + password). Is it possible to do the same with a Linux desktop with samba? I mean a Linux desktop pass machine credentials to Active Directory as windows do (SID), without any login and password. -- Otto Fuchshuber

On Thu, 2006-03-02 at 11:42 -0600, Jordan Novak wrote: > Does anyone have a way to do wake calls? > > > > Jordan Novak > > Communications Technician > > Logistics Health Inc. You could use cron and /var/spool/asterisk/outgoing scripts to dial numbers, etc... > Can you elaborate, I am fairly new to Linux and a phone guy to boot. I am looking for a way for the

Switch is only tagging the vlan packets. Once the PC loads the vlan aware driver ("client") it will be able to read tagged packet for the vlan which PC has been configured to use. Nothing to be done on the switch. W -----Original Message----- From: Joao Pereira [mailto:joao.pereira@fccn.pt] Sent: Thursday, March 02, 2006 1:15 PM To: Wojciech Tryc; asterisk-users@lists.digium.com

Hi, We are running a 3 DC samba AD domain, and use 802.1x authentication for the win10 workstations to access the wired network. We are facing the issue where, following windows updates, our windows clients keep changing back the 802.1x settings to the windows default, namely: to verify the server identity and do computer authentication only. The latter is no problem, but the first one

Hello, I'm looking for a single FXS port Analog Telephony Adapter supporting both T.38 and 802.1x. Have you ever heard of such thing ? Regards

RPMforge still has: rpmForge: madwifi-0.9.2.1-2.el5.rf.i386.rpm ATrpms has: madwifi-0.9.4-38_r2512.fc6.i386.rpm but requires their patched kernel. I am at IETF this week, and was at IEEE 802 last week. There are over 60 visible access points in most locations (actually not that may APs, but an SSID for b/g, another for a, another for 802.1x TKIP, another for 802.1x CCMP, argh!) and I

Has anyone managed to authenticate centos 5 on wired ethernet. I tried with wpa_supplicant but i won't work. Any help would be appreciated. Thanx.

I've seen that is possible to use switch port blocking with freeradius and cisco switches via 802.1X and EAP protocol. Here is more info: http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO What if I don't have switch that supports 802.1X or I want that blocking is done by FreeBSD, not the switch. Because FreeBSD is the firewall or gateway to some networks. Is there

Hi, we have updated our samba AD domain from 4.4.x to 4.5.x. The release notes for 4.5.0 included  "NTLMv1 authentication disabled by default". So we had to enable it to get our radius (freeradius) server working (for 802.1x). What would be the best way to change the freeradius configuration in such a way, that we can disable NTLMv1 again. The radius server is used for WLAN

Has anyone setup FreeRadius to do automatic VLAN assignments on their switches based on client mac addresses? If so, would you be willing to share your radius configs? I haven't touched radius since mid 90's and am stuck trying to get this to work. It would be much appreciated. thanks -- -matt

I found my problem. From Andrew Bartlett himself "This is not supported against NT4. Only Samba 3.0.21rc1 and AD support this extra flag." To do machine authentication with freeradius, your workstation (supplicant) and samba server must be a member of a 2000/2003 domain. I had the supplicant and samba server still a member of the nt4 domain. Once I changed this, it worked great.

It is an issue that I myself would also like to solve. I found multiple threads in samba and freeradius mailing lists. It seems that every couple of months there is question like this either here on FR mailing list and all point down to the same issue, that is: freeradius uses ntlm_auth (even when using winbind with newer freeradius versions, it also in the end uses ntlm_auth). And since

On 29 May 2017 12:32 >When running 'winbindd -SFd5', I see a little more of the problem after I run my two ntlm_auth commands > one after the other. I believe the 'crap' part is an acronym for 'Challenge Response > Authentication Protocol', so why would it be failing? Edit2: wbinfo -a tim.odriscoll%<mypass> works perfectly, with the winbindd debug logs

Hi there, I''m not sure if I can do this with shorewall, but any points on the right direction would be of great help... I need to have a LAN with access only enabled to certain set of computers. I was planning on having the dhcp server just give IPs to certain MAC addresses, but if a smart guy configures his computer manually with a valid IP for the LAN he can get access to the LAN

Hi, we work on authenticating computers via 802.1x with Samba AD as backend of Radius. Everything looks promising. We ask ourselves if it is a good idea to use the machine account which are created by joining a computer to the AD. We can change machine account passwords with `samba-tool user setpassword COMPUTERNAME$` This works, we have SUCCESS with `eapol_test` on the Radius server. The