Displaying 20 results from an estimated 27 matches for "800ms".
Did you mean:
100ms
2003 Jan 10
5
Shorewall site search is now available agai n
Hmm--either the indexing process is still running, or it''s broken again.
It''s 0443 GMT, and I can''t get the search engine to find anything on the
mailing list or the web site (I used ''dns'' as my search term).
It''s not that big of an inconvenience, though--Googling for
''site:shorewall.net dns'' does pretty much the same thing.
2009 Jul 10
1
Lagged Extension
Hi There
I have an extension which is in a different country and is constantly
lagged (about 800ms). When anyone tries to call this extension we get a
No route to destination message.
Now I would have thought that the server should be able to find a route
to the destination seeing as the peer poke finds it's way there. Or is
that lag too much to create a SIP channel?
Thanks in advance...
2004 Aug 05
1
HTB mpu and overhead settings for PPPoE ADSL?
...over the wire, everything works fine. But
if there are many small packets saturating my uplink, I get pings of 1000ms
and above. To minimize this effect I''ve set the HTB qdisc rate to 100kbit/s.
But even now, throttling my uplink to lower than 80% of physical bandwidth,
pings go up to 800ms in some cases.
Today I''ve noticed, that two additional parameters have been added recently to
the HTB-shaper: mpu and overhead. Are this new parameters suitable for
solving my problem?
Which are smart values for this two settings? I''m shaping the ppp-device
directly, not the e...
2004 Sep 23
2
Random Intermittent Noise for SIP to FX0 calls plus echo
...has had the experience I have been
having. In reading recent posts on echo cancellation, I think there
is....
We recently cut over the Asterisk and are configured with 5 FXS and 2
FXO ports to the PSTN via 2 TDM400P's and 5 SIP phones on our local
network. I have set up echo cancellation with 800ms echo training. I do
not have echocancelwhenbridged on, since since this is for complete TDM
circuit per the comments in zapata.conf. When calls come in, there is
echo, but it quickly trains and goes away. This is not the problem
though. The asterisk server has 1GB RAM and 1GHz clock. We are current...
2005 Apr 18
3
speex voice seems to be bit breaking over long distance.
...speex voice seems to be bit
> breaking over long distance.
>
>
>
> Dear all,
> I have implemented speex. Under LAN environment,
> everything is working fine. However, when the
> source
> and destination is about 20 hrs away, with ping
> response time of about 800ms, the voice is
> breaking.
> Breaking means you can not hear a smooth voice.
> Like
> the voice is being "chopped" into many pieces.
>
> The amount of packet lost is less than 10%. I have
> tried 8KHz, 16KHz, 32KHz. The bigger it gets, the
> more
> lousy t...
2004 Nov 24
5
HTB Script
2010 Apr 27
3
High network latency on first packet
...4.6 ms
64 bytes from 5.6.7.8: icmp_seq=2 ttl=51 time=25.3 ms
64 bytes from 5.6.7.8: icmp_seq=3 ttl=51 time=25.2 ms
^C
--- 5.6.7.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 24.612/25.068/25.300/0.371 ms
Initial time goes up as high as 800ms. My guess is that this has
something to do with arp. Since when a host is in the arp cache, the
delay disappears, which is why the second ping gets an immediate reply.
I tried specifing mac addresses in the domU cfg files and playing with
domU routing flags without apparent benefit.
Is this an is...
2016 Jan 13
0
[PATCH 2/2] clk: allow engine reclock on fermi
this gives me on my 630M fermi card some speed improvements while on 0f:
pixmark_piano: ~800ms to ~500ms frame time
unigine_heaven (lowest setting, fullhd): 5.1 fps to 6.4 fps)
clocks for this gpu:
07: 270 MHz
0f: 475 MHz
Signed-off-by: Karol Herbst <nouveau at karolherbst.de>
---
drm/nouveau/nvkm/subdev/clk/gf100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a...
2005 Apr 18
0
speex voice seems to be bit breaking over long distance.
Dear all,
I have implemented speex. Under LAN environment,
everything is working fine. However, when the source
and destination is about 20 hrs away, with ping
response time of about 800ms, the voice is breaking.
Breaking means you can not hear a smooth voice. Like
the voice is being "chopped" into many pieces.
The amount of packet lost is less than 10%. I have
tried 8KHz, 16KHz, 32KHz. The bigger it gets, the more
lousy the quality. I believe I have enough bandwidth
since...
2004 Dec 29
2
Problem with Digium TDM04B
I have installed Digium TDM04B with the latest CVS. However I have
encountered following problems:
1. When it dials out, many times the digits are not properly recognized
by telco as I hear the announcement "please check the number and dial
again" although I see on the screen that the dialed number is correct.
2. When the call is forwarded outside, with something like
exten =>
2014 Jun 11
0
[PATCH v11 06/16] qspinlock: prolong the stay in the pending bit path
...ds on the CPU chip that we used for testing. I ran my test on a
10-core Westmere-EX chip. I run my microbench on different pairs of core
within the same chip. It produces different results that varies from
779.5ms to up to 1192ms. Without that patch, the lowest value I can get
is still close to 800ms, but the highest can be up to 1800ms or so. So I
believe it is just a matter of timing that you did not observed in your
test machine.
-Longman
2005 Apr 18
0
speex voice seems to be bit breaking over long distance.
...r long distance.
> >
> >
> >
> > Dear all,
> > I have implemented speex. Under LAN environment,
> > everything is working fine. However, when the
> > source
> > and destination is about 20 hrs away, with ping
> > response time of about 800ms, the voice is
> > breaking.
> > Breaking means you can not hear a smooth voice.
> > Like
> > the voice is being "chopped" into many pieces.
> >
> > The amount of packet lost is less than 10%. I have
> > tried 8KHz, 16KHz, 32KHz. The bigger i...
2005 Jan 20
1
Using Zyxel Analog Telephone adapter with a GSM gateway
...ension -> Asterisk -> ZyxelAnalogTelephoneAdapter -> GSM gateway.
The best way would be to make the ZyxelAnalog.. to be a channel.
But I don't think that is doable.. or ?
----
So i checked with Dial command.. trying to use something like:
exten => 99,1,Dial(SIP/11,20,D($EXTEN),w=800ms)
; Dial option
; 'D([digits])' -- Send DTMF digit string *after* called party has answered
; but before the bridge. (w=500ms sec pause)
Problem is, that the astrisk won't push the $EXTEN numbers.
(or does it ? I can't hear anything :-| )
My console (verbose l...
2009 May 27
3
Call in progress tones
...is busy.
I don't want to force "R" on the Dial app as then you can get "ring
ring, ring ring, rin, beep beep beep" when the phone is busy.
What I want is something to play during the call setup or "making
progress" stage of the call. just a series of beeps about 800ms apart
until the phone call is actually set up... so then you would get
something like "bip, bip, bip, bip, bip, ring ring, ring ring..." for
ringing or "bip, bip, bip, bip, bip, beep, beep, beep..." for busy.
Any ideas?
Mikel
2004 Dec 30
2
[Bug 40] system hangs, Availability problems, maybe conntrack bug, possible reason here.
https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=40
------- Additional Comments From netfilter@linuxace.com 2004-12-30 20:16 MET -------
Any further word on this? Bug report is getting stale...
--
Configure bugmail: https://bugzilla.netfilter.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching
2016 Jan 13
5
[PATCH 0/2] allow partly reclocking on chipset
some chipset have working engine reclocking, but broken memory reclocking like
Fermi. We should for now, add the functionality to allow partly reclocking for
those.
Allthough this doesn't give as much performance as one might wish, it is till
noticeable and may improve performance enough to be noted.
Karol Herbst (2):
clk: seperate engine and memory reclock toggles
clk: allow engine
2013 Jun 28
2
tinc for Satellite connections (benchmarking)
Hello.
I'm living in the country side where the communications are very very
poor. My only choice is Satellite connection throw the French company
Eurona which uses the network deployed by Skylogicnet.
In general the latency is very bad (~800ms) and the network is very
unstable. I have been investigating in the ISP routers which are in my
path and there are many hops which are done in a private network
(10.130.130.0/24). I think one or more of these hops are doing some kind
of HTTP proxy cache and also many dirty stuff like blocking some...
2014 Jun 11
2
[PATCH v11 06/16] qspinlock: prolong the stay in the pending bit path
On Fri, May 30, 2014 at 11:43:52AM -0400, Waiman Long wrote:
> ---
> kernel/locking/qspinlock.c | 18 ++++++++++++++++--
> 1 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
> index fc7fd8c..7f10758 100644
> --- a/kernel/locking/qspinlock.c
> +++ b/kernel/locking/qspinlock.c
> @@ -233,11 +233,25
2014 Jun 11
2
[PATCH v11 06/16] qspinlock: prolong the stay in the pending bit path
On Fri, May 30, 2014 at 11:43:52AM -0400, Waiman Long wrote:
> ---
> kernel/locking/qspinlock.c | 18 ++++++++++++++++--
> 1 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
> index fc7fd8c..7f10758 100644
> --- a/kernel/locking/qspinlock.c
> +++ b/kernel/locking/qspinlock.c
> @@ -233,11 +233,25
2018 Feb 25
3
GSOC 2018: Diversification of Search Results
...briefly
presenting the details of the methods that I propose to implement:
1) Implementing GLS-MPT:
First I'll be implementing the GLS algorithm (details on page 6 of [2])
with objective function based on MPT (details on page 13 of [2]). According
to the paper, avg. latency for the GLS-MPT is ~800ms (table V of [2]),
which involves preprocessing (storing pairwise distance of top N documents,
N = 100) and the actual diversification which finally returns top-k (k =
20) diversified results. Note: k = 20 and N = 100 are suitable as usually
users don't page too far and even if they do, it's...