search for: 80000bit

...Is this > behavior is expected? > I don't think so. So your other values are set to 0? Can you share the actual <bandwidth/> element from 'virsh dumxpl $dom'? However, I might be hitting the same issue: # tc -s class show dev vnet0 class htb 1:1 root leaf 2: prio 0 rate 80000bit ceil 80000bit burst 1600b cburst 1600b Sent 5146972 bytes 3540 pkt (dropped 0, overlimits 0 requeues 0) rate 536752bit 45pps backlog 0b 4p requeues 0 lended: 359 borrowed: 0 giants: 0 tokens: -937499999 ctokens: -937499999 class sfq 2:36c parent 2: (dropped 0, overlimits 0 requeues 0) b...

...160000bit ceil 160000bit burst 1799b/8 mpu 0b overhead 0b cburst 1799b/8 mpu 0b overhead 0b level 7 Sent 1957552 bytes 28162 pkts (dropped 0, overlimits 0) rate 3672bit 7pps lended: 0 borrowed: 0 giants: 0 tokens: 89703 ctokens: 89703 class htb 1:10 parent 1:1 leaf 20: prio 0 quantum 1000 rate 80000bit ceil 160000bit burst 1699b/8 mpu 0b overhead 0b cburst 1799b/8 mpu 0b overhead 0b level 0 Sent 668860 bytes 9984 pkts (dropped 0, overlimits 0) lended: 9984 borrowed: 0 giants: 0 tokens: 167527 ctokens: 88884 class htb 1:12 parent 1:1 leaf 30: prio 0 quantum 1000 rate 80000bit ceil 160000bit bu...

...9b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0 quantum 1500 rate 80000bit ceil 300000bit burst 1639b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 0 Sent 12243472 bytes 8787 pkt (dropped 0, overlimits 0 requeues 0) rate 43264bit 6pps backlog 0b 0p requeues 0 lended: 3515 borrowed: 5272 giants: 0 tokens: -181860 ctokens: -86779 class htb 1:3 parent 1:...

On 27.05.2013 12:36, vikrant verma wrote: > Hello Michal, > > I am using the following code - > > virDomainSetInterfaceParameters(dom, "vnet0", networkParainfoPtr, > nparams,0); > > before calling this i am assigning the following Inbound values > > inbound.average = 10 (10 kbps) > inbound .peak = 10 > inbound.burst = 10 I suspect this way too

...9;'ve been using a tc setup for almost two years, but at some point (probably when I switched to kernel 2.6.x, but I''m not sure) it has started making something very weird. For a certain class, the rate is 125000bit and the ceil is 270000bit, but the fastest rate I get is about 75-80000bit, instead of the "promised" 125000, *with no other traffic in the device*. If I disable tc entirely, the upload rate is more than 300000bit (a little below the line capacity, which is 320000bit), but as soon as tc is enabled again, the upload speed drops again to 75-80kbit. There is n...

...ens: 398459 ctokens: 108855 class htb 1:20 parent 1:1 leaf 20: prio 2 rate 90000bit ceil 90000bit burst 6Kb cburst 1711b Sent 8067 bytes 44 pkts (dropped 0, overlimits 0) rate 712bit lended: 44 borrowed: 0 giants: 0 tokens: 432284 ctokens: 109555 class htb 1:30 parent 1:1 leaf 30: prio 2 rate 80000bit ceil 80000bit burst 6Kb cburst 1699b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) lended: 0 borrowed: 0 giants: 0 tokens: 503316 ctokens: 139264 + exit root@Devil:~ # sh -x wshaper.htb stop + DOWNLINK=100 + UPLINK=100 + DEV=eth0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDS...

...q; } ; } } } } CLASSES class htb 2:1 root rate 200000bit ceil 200000bit burst 1624b cburst 1624b class htb 2:2 parent 2:1 leaf 3: prio 0 rate 48000bit ceil 200000bit burst 1605b cburst 1624b class htb 2:3 parent 2:1 leaf 4: prio 7 rate 8000bit ceil 80000bit burst 1600b cburst 1609b class htb 2:4 parent 2:1 leaf 5: prio 1 rate 144000bit ceil 200000bit burst 1617b cburst 1624b As you can see here, class 2:3 stands for the p2p class, and that''s where I send the marked p2p packets, I don''t see why this configuration is not working,...

Hi! It''s me again bothering you guys, what I want to do is to give full bandwidth to VPN traffic and limit the rest to 30KB/s (kilobytespersecond), ok? Here''s what I have: tcclasses ################################## eth0 1 1kbps 70kbps 1 eth0 2 1kbps 30kbps 2 default eth1 3 15kbps 10000kbps 1 eth1 4

...tb 1:8 parent 1:1 prio 1 rate 40000bit ceil 8000Mbit burst 1604b cburst 1000999b class htb 1:80 parent 1:1 prio 1 rate 40000bit ceil 8000Mbit burst 1604b cburst 1000999b class htb 1:18 parent 1:1 prio 3 rate 40000bit ceil 8000Mbit burst 1604b cburst 1000999b class htb 1:28 parent 1:1 prio 5 rate 80000bit ceil 8000Mbit burst 1609b cburst 1000999b class htb 1:38 parent 1:1 prio 5 rate 40000bit ceil 8000Mbit burst 1604b cburst 1000999b class htb 1:48 parent 1:1 prio 6 rate 40000bit ceil 1200Kbit burst 1604b cburst 1749b class htb 1:58 parent 1:1 prio 7 rate 40000bit ceil 1200Kbit burst 1604b cburs...

...lass htb 28:1 root leaf 49: prio 0 rate 10000Kbit ceil 10000Kbit burst 6598b cburst 6598b Sent 16539369 bytes 11178 pkt (dropped 1160, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 lended: 11178 borrowed: 0 giants: 0 tokens: 5368 ctokens: 5368 class htb 47:1 root prio 1 rate 80000bit ceil 128000bit burst 125Kb cburst 8000b Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 lended: 0 borrowed: 0 giants: 0 tokens: 13107200 ctokens: 512000 class htb 48:1 root prio 2 rate 2048Kbit ceil 3072Kbit burst 3000Kb cburst 192000b Sent 5418...

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a