search for: 7506

It shows the physical disks on the server bash-2.05b# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/SUNW,fas at 3,8800000/sd at 2,0 1. c0t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/SUNW,fas at 3,8800000/sd at 3,0 2. c0t4d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/SUNW,fas at 3,8...

...ds. Thanks to the informative message Byron, I realize the deficiencies of doing RAID 1 this way, especially now that the builtin is out of date with Kernel used by Centos. I have 4 ATA drives that were configured in two pairs. I assume that I need a 3Wave controller that has 4 ports like the 7506-4LP...correct? Do I need to install any software during the installation of Centos? Todd -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachment...

How slow and how reliable is software raid 6 on CentOS 5. The system I'm going to use is A socket 939 dual core Athlon, 4 gigs of ram and a 3ware 7506-8 controller. Its mostly going to be used for storage (Movies, MP3s etc.). Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070915/5c140c1e/attachment.html>

...' version that runs oke, it picks up the uid/gid and homedirectory from LDAP as well. Is that implemented in this ldap support? SWAT BTW. SWAT looks like a runaway train- it seemed to continuously fill my syslog with the config parse lines Jun 17 11:46:07 dev-snws-1.houten.acriter.nl swat[7506]: doing parameter ldap suffix = o=foo.com Jun 17 11:46:07 dev-snws-1.houten.acriter.nl swat[7506]: doing parameter ldap filter = uid=%u Jun 17 11:46:07 dev-snws-1.houten.acriter.nl swat[7506]: doing parameter NIS homedir = Yes Jun 17 11:46:07 dev-snws-1.houten.acriter.nl swat[7507]: doing p...

...LePain <jlb17 at duke.edu> > I'm in the midst of testing a dual 9500-12 based system, and I've got all > sorts of results (I posted tiobench numbers for XFS and ext3 recently). Until the Escalade 9500S series matures, I've been recommending the following: 3Ware Escalade 7506/8506 for RAID-10. 3Ware Escalade 7506/8506 for RAID-5 when it is largely a read-only setup. LSI Logic MegaRAID SATA 300-8X (XScale) for RAID-5. Unless you absolutely need the maximum disk efficiency of RAID-5, or you have 99% reads (e.g., typical MySQL Internet server), then RAID-10 is often far b...

...ails through ODBC. It works very well except that every now and then (ie four or five days or so) it breaks. I have included a log from the CLI of the most recent break, it looks like this: ---------------- Start of output -- Executing Dial("SIP/sip.ict.ru.ac.za-b7721690", "SIP/1017506@myserver&Zap/10|20|rtT") in new stack -- Called 1017506@myserver -- Requested transfer capability: 0x00 - SPEECH -- Called 10 -- SIP/myserver-0a145e90 is ringing -- Zap/10-1 is proceeding passing it to SIP/myserver-b7721690 -- Channel 0/1, span 4 got hangup request -- Channel 0/1, s...

Hi, I've seen comments about the poor performance of these cards with raid 5 configs. I have an old card with 3 x 500G IDE drives connected in raid 5 and I'm getting around 10mb/s write performance. :-( I'm seeing high iowait figures at times and associated very high cpu load average figures, probably because, under load, everything is stacked up waiting for the disks to actually

Alle, We have recently had one of our office servers go south. The hardware was an Intel SDS2 motherboard (EATX), Dual Intel PIII 1.4GHz FC-PGA2-L2 512KB, 3GB (6x512MB) 168 pin DIMM, SDRAM 133MHz/PC-133-ECC with 1x3Ware 7006-2 and 2x3Ware 7506-4LP RAID controllers. The OS was RHEL3. Apparently, according to the beep codes, there has been an FRB failure. I've migrated most of the services (mail,web,proxy,samba,mysql,mailman,home directories) to an interim box running CentOS 5.2. At a minimum, I need to replace the motherboard and...

...s/fs/cgroup/memory/machine.slice/machine-lxc\\x2d7445\\x2dtst\\x2dmxs2.test.scope/memory.limit_in_bytes 1073741824 4) Check list of pid in cgroups (it's IMPOTANT moment): [root@node01]# cat /sys/fs/cgroup/memory/machine.slice/machine-lxc\\x2d7445\\x2dtst\\x2dmxs2.test.scope/tasks 7445 7446 7480 7506 7510 7511 7512 7529 7532 7533 7723 7724 8251 8253 10455 First PID 7445 - it's pid of libvirt process for container: # ps ax | grep 7445 7445 ? Sl 0:00 /usr/libexec/libvirt_lxc --name tst-mxs2.test --console 21 --security=none --handshake 24 --veth macvlan5 [root@node01]# virsh li...

...part of SVM volume stripe:d11. Please see metaclear(1M). /dev/dsk/c2t11d0s2 is in use by zpool storedge. Please see zpool(1M). /dev/dsk/c2t11d0s7 contains an SVM mdb. Please see metadb(1M). format> partition partition> print Current partition table (original): Total disk cylinders available: 7506 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 home wm 0 - 3783 8.50GB (3784/0/0) 17830208 1 home wm 3784 - 7499 8.35GB (3716/0/0) 17509792 2 backup wu 0 - 7505 16.86GB (7506/0/...

Has anyone seen this issue? We're running containers under CentOS 7.2 and some of these containers are reporting incorrect memory allocation in /proc/meminfo. The output below comes from a system with 32G of memory and 84GB of swap. The values reported are completely wrong. # cat /proc/meminfo MemTotal: 9007199254740991 kB MemFree: 9007199224543267 kB MemAvailable: 12985680

...-lxc\\x2d7445\\x2dtst\\x2dmxs2.test.scope/memory.limit_in_bytes > 1073741824 > 4) Check list of pid in cgroups (it's IMPOTANT moment): > [root@node01]# cat > /sys/fs/cgroup/memory/machine.slice/machine-lxc\\x2d7445\\x2dtst\\x2dmxs2.test.scope/tasks > 7445 > 7446 > 7480 > 7506 > 7510 > 7511 > 7512 > 7529 > 7532 > 7533 > 7723 > 7724 > 8251 > 8253 > 10455 > > > First PID 7445 - it's pid of libvirt process for container: > # ps ax | grep 7445 > 7445 ? Sl 0:00 /usr/libexec/libvirt_lxc --name > tst-mxs2.tes...

Hi Everyone, Has anyone had any experience of using the Promise FastTrak SX4000 or SuperTrak SX6000 IDE RAID Controllers under Centos (if it matters I'm using version 4). I've seen it listed on linuxcompatible.org as working but would prefer to find out any first-hand experince before I buy. I'm looking to build a new mini server based on Mini-ITX and have found a great 1U case

Anyone having good results with 4-STABLE and the 3Ware 9000 series controllers? -- albert chin (china@thewrittenword.com)

...two days to write ten bytes), I want the best system to win. I just can't believe that a Linux/Samba system is unable to out-perform a runty Windows box. One nagging question is what would the "real" server's performance be? We have spec'd dual Athlon MP 2200+ CPUs, a 3ware 7506-12 controller with 12 200gb Western Digital drives, and 4gb of RAM. (Whole thing is $6,000!!) Thing is, I don't think the RAID would be much faster (writing) than the existing IDE drive. I'd hate to blow six grand and find out it doesn't perform any better. Has anyone dealt with a...

...----- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20120229/c0751800/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 7506 bytes Desc: image001.jpg URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20120229/c0751800/attachment.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2126 bytes Desc: image002.jpg URL: <ht...

I am running compiz fusion with the standard show-off settings (cube with skydome and all that jazz) and I want to run Elders Scrolls IV: Oblivion but I don't know how. I made a fresh install via DVD (backup mind you) and run it through wine. The menu pops up (asking if I want to play, uninstall, exit, etc.) and I click play but the window pops up for a second and leaves. Could compiz be the

...login script has the following line: net use M: \\calais\downloads Does anyone know how to set the correct description for the share on mapped drives? > Peter Caitens > Analyst Programmer - Student One > Technology One Limited > > 67 High St , Toowong 4066 > Phone: +61 7 3377 7506 > Fax: +61 7 3377 7301 > E-mail: Peter_Caitens@TechnologyOneCorp.com > Techone home page at: http://www.TechnologyOneCorp.com > Technology One's entire liability will be limited to resupplying the > material enclosed. No other warranties are provided > Technology One...

...r-3DM releaases. FYI: For reference: 7400/7800 = 33PCI64 full-length, 64-bit ASIC, 1MB SRAM, 4/8 channel 7410/7810 = as 7400/7800 but *half*-length 7450/7850 = as 7410/7810 but *2MB* 0 wait state SRAM 7500-4/8 = 7450/7850 merely renamed 7500-12 = as 7500-4/8, but with *4MB* SRAM and 12 channels 7506-x = as 7500-x, but 66PCI64 interface (ASIC clock doubled)

I have ubuntu 8.04 (hardy heron), I think my graphics card is an ATI thing, running on 32bit... so machine is older, but most things work ok... the only trouble I'm having at the moment is getting my game of oblivion elder scrolls to run in this wine thing... wine 1.1.7... (that the latest one at the moment right?) I did have it running a while back in cedega, but my subscription is out (not