search for: 685avr

CyberPower Battery Backup with Surge Protection, model LE825G Appears to function properly with the driver listed on the HCL for the Cyber Power Systems ups 2 685AVR USB (usbhid-ups). Tested with shutdown mode "UPS Goes On Battery" with a 5 second timer and the system successfully shutdown as expected. upsc output: upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1110 battery.run...

...device: uhid1: CPS UPS BF700, rev 1.10/0.01, addr 2, iclass 3/0 ... and I have chmodded all the USB stuff in /dev to 777, just to make things easier at first. Anyway, I grabbed the nut development source off CVS, compiled/installed (including the USB stuff), and tried to connect to the 685AVR. (I also installed libusb, of course.) # newhidups -DD -u root -x vendorid=0764 auto But, it's no dice: Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0) debug level is '2' No appropriate HID device found No matching USB/HID UPS found I...

Hi Scott, Scott Alfter wrote: > I had a UPS go bad recently (shuts off all by itself for no good reason, >AFAICT), so I bought a CyberPower 685AVR this afternoon. The two CyberPower >drivers in NUT 2.0.2 don't know how to talk to it, but the hidups driver >appears to work properly. This means you have to use USB instead of RS-232 (it >supports both), but at least it works. > >The 800AVR is a related model (higher power-outp...

i can't seem to get newhidups to detect my UPS.. i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling my own) here is the entry for the UPS in /proc/bus/usb/devices T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0764 ProdID=0501 Rev= 0.01 S: Manufacturer=CPS S: Product=UPS

...ters. I have very limited work on Linux/Unix. I did get Apache web server running (redden.homeip.net). If someone can point me in the right direction I will try to get it working. Cyber Power Systems makes the GS1285U and they say that it shares some of the commands with the Cyber Power Systems 685AVR. Here is the info from my system. I ran hidups on all my USB devices. From /usr/local/ups/etc/ups.conf These are the only non-comment lines. [GeekSquad1] driver = hidups port = /dev/bus/usb/001/002 desc = "Geek Squad GS1285U" gary@redden-p700:~$ sudo /usr/local/ups/bin/h...

It looks like the CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups has a favorable device dump linked to the Devices Dumps Library page here: http://networkupstools.org/ddl/Cyber_Power_Systems/CP685AVR.html However, it is not listed anywhere on the Hardware Compatibility List (HCL) page here: http://networkupstools.org/stable-hcl.html T...

We are interested in using Nut on our Federa 6.0 servers. However, our UPS systems are sold under the name "Geek Squad" (sold through the Best Buy chain of department stores). I'm pretty certain Geek Squad does not manufacture these units and they just rebrand them. Does anyone know who makes these units or what they are compatible with in terms of driver level protocol? The ones we

i own a CyberPower OR2200LCDRM2U and was wondering if any nut drivers support this ups. none i have tried have worked although usbhid-ups did tell me that the productid=0601 was not supported yet. i see in the compatability list on the nut website that the PR2200 is supported with the powerpanel driver but the OR2200 is not listed. i am interested in what i am doing wrong or if this is a support

[please use Reply-All - this list does not modify the reply-to header] > On Nov 23, 2016, at 10:30 AM, Craig STCR <craig.stcr1 at gmail.com> wrote: > > It looks like the CyberPower Cyber Power Systems CP685AVR supported by > usbhid-ups has a favorable device dump linked to the Devices Dumps > Library page here: > > http://networkupstools.org/ddl/Cyber_Power_Systems/CP685AVR.html That entry is from a mailing list post from over ten years ago[*]. Do you have this particular UPS? If so, can yo...

...i contacted cyberpower systems and they stated the following about the > OR2200LCDRM2U: > > > The OR2200LCDRM2U is a native USB device and does not utilize any > adapters like our older UPS designs do. The USB port design in its > most > basic form should be the same as the 685AVR, 800AVR, and AE550 that > are > listed as compatible with the NUT usbhid-ups driver. If you need any > additional information I would be happy to try to obtain it from our > software/firmware group. If you can let me know precisely what he > needs > I will see if I can obtain...

I'm trying to get nut to work with a Cyberpower 900AVR. There are many different products known by this name, but this one has the extra name 'BC900D'. I am told by a cyberpower tech that this one should talk exactly the same USB protocol as the 685AVR, which was recently made to work with newhidups. Unfortunately, when I run the SVN checkout (trunk) of nut-2.1, I get: sstreet drivers # ./newhidups -DDDDD -u root /dev/usb/hiddev0 Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0) debug level is '5' Checking device (0000/0000) (005/...

...at upsmonitor) Works flawlessly. Patch as follows: root(upsmonitor)/usr/local/etc/nut# diff -u driver.list driver.list.new - --- driver.list 2009-07-28 08:02:23.000000000 +0200 +++ driver.list.new 2009-07-28 20:25:11.000000000 +0200 @@ -128,6 +128,7 @@ "Cyber Power Systems" "685AVR" "USB" "usbhid-ups" "Cyber Power Systems" "800AVR" "USB" "usbhid-ups" "Cyber Power Systems" "AE550" "USB" "usbhid-ups" +"Cyber Power Systems" "CP...