search for: 5520

...username=xxx fromuser=xxx fromdomain=switch-1.voctel.net host=switch-1.voctel.net ;defaultip=172.31.254.2 dtmfmode=inband nat=yes canreinvite=no ;regexten=9000 insecure=very ; required for incoming calls my message log===================== May 20 10:01:33 DEBUG[5520]: ##### Testing 209.91.145.154 with 172.31.0.0 May 20 10:01:33 DEBUG[5520]: Target address 209.91.145.154 is not local, substituting externip May 20 10:01:33 DEBUG[5520]: Scheduled a registration timeout # 15 May 20 10:01:33 DEBUG[5520]: ##### Testing 69.90.155.70 with 172.31.0.0 May 20 10:01:33 DE...

..., 9240, 9260, 9280 are some pci-express SAS MegaRaid cards.... if you want help, please don't guess what you have, figure out what it actually is. the output of `lspci -nn` will identify all boards in your system, for instance... # lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 13) 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) 00:07.0 PCI bridge [0604]: Inte...

# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) 00:05.0 PCI bridge [0604]: Intel C...

On 7/30/2016 6:56 AM, Fawzy Ibrhim wrote: > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) > 00:05.0 PCI bridge...

...(28/57). kernel2.6.31.13: result : disk offline didn''t happen(0/57) our env : compile env and filesystem : Redhat AS 5.4 kernel: pvops_2.6.31.13 hardware ( lspci ): 00:00.0 Host bridge: Intel Corporation 5500 I/O Hub to ESI Port (rev 22) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 22) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 22) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 22) 00:09.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI...

...run is: virsh -c qemu:///system attach-interface --domain router --type bridge --source virbr0 --model virtio --config --live the lspci output within the vm is this: # lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller 00:01.0 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:01.1 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:01.2 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) 00:01.3 PCI bridge: Intel Corporation 7500/5520/5500/...

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

...ur Xen environment: > > SunBlade 6000 chassis > SunBlade X6270 blade > SuSE ES11 SP1 64bit Dom0 (Xen 4.0.0 - Kernel 2.6.32.12-0.7-xen ) > SuSE ES11 SP1 64bit DomU > > The lspci -vt output at Dom0 looks like this: > > ### > -[0000:00]-+-00.0 Intel Corporation 5520 I/O Hub to ESI Port > +-01.0-[0000:01-06]----00.0 LSI Logic / Symbios Logic > SAS1068E PCI-Express Fusion-MPT SAS > +-03.0-[0000:07-0c]-- > +-05.0-[0000:0d-12]----00.0-[0000:0e]----00.0 Freescale > Semiconductor Inc Device 0091 > +...

http://www.intel.com/content/www/us/en/chipsets/5520-and-5500-chipset-ioh-specification-update.html Stepping B-3 has two errata (#47 and #53) related to Interrupt remapping, to which the workaround is for the BIOS to completely disable interrupt remapping. These errata are fixed in stepping C-2. Unfortunately this chipset is very common and many B...

...ime =none extsz=4096 blocks=0, rtextents=0 cat /etc/centos-release: CentOS release 6.2 (Final) uname -a: Linux *****store01 2.6.32-220.4.2.el6.x86_64 #1 SMP Tue Feb 14 04:00:16 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux lspci output: 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:04.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 (rev...

https://bugzilla.samba.org/show_bug.cgi?id=5520 Summary: Rsync cannot copy to a vfat partition on kernel 2.6.25+ Product: rsync Version: 3.0.3 Platform: All URL: https://bugzilla.redhat.com/show_bug.cgi?id=449080 OS/Version: Linux Status: NEW Severity: major...

.../system attach-interface --domain router --type bridge --source virbr0 --model virtio --config --live > > the lspci output within the vm is this: > # lspci > 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller > 00:01.0 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) > 00:01.1 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) > 00:01.2 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 (rev 02) > 00:01.3 PCI bridge: Intel Corporation...

1: IOMMU: properly check whether interrupt remapping is enabled 2: AMD IOMMU: only disable when certain IVRS consistency checks fail 3: VT-d: deal with 5500/5520/X58 errata Patch 1 and 2 are version 2 of a previously submitted, then withdrawn patch following up after XSA-36. Patch 3 is version 3 of a patch previously sent by Malcolm and Andrew. Signed-off-by: Jan Beulich <jbeulich@suse.com>

...ap config HQKONTRAST:backend = ad idmap config HQKONTRAST:schema_mode = rfc2307 idmap config HQKONTRAST:range = 1024-99999 # Use settings from AD for login shell and home directory winbind nss info = rfc2307 Log on Member-Server: [2016/09/22 18:07:44.380907, 10, pid=5520, effective(0, 0), real(0, 0), class=winbind] ../source3/winbindd/winbindd.c:795(wb_request_done) wb_request_done[10221:XIDS_TO_SIDS]: NT_STATUS_OK [2016/09/22 18:07:44.380936, 10, pid=5520, effective(0, 0), real(0, 0), class=winbind] ../source3/winbindd/winbindd.c:863(winbind_client_response_writ...

Hello, I''m hoping someone may be able to push us in the right direction. I''m trying to get one of our products to work with the current branch of Xen (4.0/4.0.0) but I''m hitting a problem. We are currently using Xen 3.3.2 on a Sun Blade 600 chassis (with x6270 blades) this works great. But when we upgrade to Xen 4.0/4.0.1 we get the following message when

All, just having spotted the backport of Linux commit 03bbcb2e I notice a certain discrepancy with the Xen commit having the same purpose as well as with the actual specification updates: The Linux solution keys off of device IDs 3403 and 3406, as listed in the specification update, but this way fails to cover the X58 chipset, which has - under different numbers (62 and 69) - the same errata

...th the minimum, almost only the kernel. before installing shorewall, I installed iptables 1.2.9 and iproute2. Then I did a manual ./install.sh from the directory extracted from the tarball. When I issued a shorewall start, I received hundreds of errors like: /usr/share/shorewall/firewall: line 5520: /var/lib/shorewall/shorewall-18641: Is a directory I did a shorewall trace start > /tmp/x 2>&1 and reviewed the trace to found the following lines: ++ mktempfile /var/lib/shorewall ++ ''['' -z '''' '']'' ++ find_mktemp +++ which mktemp...

...0x04) (vdevfn 0x30) (func 0x0) (uuid 83e7e9d0-9a6c-228d-e69c-3c6715dabdfc) ) (uuid 7eca9041-7958-fda6-0d04-406884a17f47) (backend 0) ) ) ) [root@jedi root]# lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 12) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 12) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 12) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Roo...

...e format: head(PAS) Date PAS 1 2010-01-21 05:01:00 0.0013938 2 2010-01-21 05:02:00 0.0015331 3 2010-01-21 05:03:00 0.0016725 4 2010-01-21 05:04:00 0.0016725 5 2010-01-21 05:05:00 0.0012265 6 2010-01-21 05:06:00 0.0015889 str(PAS) 'data.frame': 5520 obs. of 2 variables: $ Date : POSIXct, format: "2010-01-21 05:01:00" "2010-01-21 05:02:00" ... $ PAS: num 0.00139 0.00153 0.00167 0.00167 0.00123 ... Using zoo: PASmin<-zoo(as.matrix(PAS[,2]),as.POSIXct(PAS[,1],format="%Y-%m-%d %H:%M:%S",tz="UTC&q...

Hi, I''ve been trying to boot stefano''s minimal dom0 kernel from git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 2.6.36-rc1-initial-domain-v2+pat On xen-unstable, I get the following WARN_ON()''s from Xen when bringing up the NIC''s, then the machine hangs forever when trying to login either over serial or NIC. (XEN) Xen WARN at msi.c:649 (XEN) ----[