search for: 500m

...right-click on your R program icon (the icon on your desktop or in your programs directory). Select ``Properties'', and then select the ``Shortcut'' tab. Look for the ``Target'' field and after the closing quotes around the location of the R executible, add  --max-mem-size=500M It does not work. When I add the --max-mem-size=500M in Target field. There is error like as below: “The name "C:\Program Files\R\R-2.11.0\bin\Rgui.exe"--max-mem-size=500M specified in the Target box is not valid”   I use R2.11.0. in window vista with 3Gb RAM.   Have a nice day   Az...

Default boot volume on Fedora is 500M, with a kernel installonly_limit of 3. So far this seems sufficient, even accounting for the "rescue kernel" (which is really a nohostonly initramfs, which is quite a bit larger than the standard hostonly initramfs used for numbered kernels).

...t; This is my starting point. I am using your instructions as posted > here: http://libguestfs.org/virt-resize.1.html > > # virt-filesystems --long -h --all -a img-1.qcow2 > Name Type VFS Label MBR Size Parent > /dev/sda1 filesystem xfs - - 500M - > /dev/centos/root filesystem xfs - - 15G - > /dev/centos/swap filesystem swap - - 820M - > /dev/centos/root lv - - - 15G /dev/centos > /dev/centos/swap lv - - - 820M /dev/centos > /dev/centos vg...

Have a CentOS 4.x 32 bit server running on a single 500M SATA drive. What is easiest way to convert too RAID 1 on it? Anyone have a link? Would be open to hardware or software just do not want to reinstall the entire mess.

...openh323 versions which are 1.5.2 and 1.12.2 respectively among many other parameters. So far, unfortunately, the matter has not been resolved. However, I have noticed that the memory usage on each server has built up with time after the server being rebooted. I have complained about using close to 500M even when there were very few calls on the server but nobody seemed to be able to let me know if they were running at high memory usages except for Jesse who was telling me that his memory usages have always been low. Very recently, I noticed that after I rebooted the servers, the memory usage woul...

...sh = "restart" disk = [ "tap:aio:/vm/mail3.img,xvda,w" ] vif = [ "mac=00:16:36:4f:d6:11,bridge=xenbr1,script=vif-bridge" ] ~ The next one does not autostart (but starts ok with "xm create name2"). This is the only guest that has two bridges. There is only 500M RAM, but a third guest starts fine with 500M): name = "name2" uuid = "68e33ec6-ef36-9eac-27d7-65a709684551" maxmem = 500 memory = 500 vcpus = 1 bootloader = "/usr/bin/pygrub" # kernel = "/var/lib/xen/boot_kernel.5g5MLq" # ramdisk = "/var/lib/xen/boot_r...

>> What size is recommended for the /boot partition? After doing a fresh >> install and lengthy backup restore I realized I only made it 200M. Is >> this going to be a problem? > > Mine was about 500 MB and I removed some kernels because I got a warning the > partition was getting full. > > With only two kernels installed, 182 MB are used. I would suggest 1 GB

Hello, I have a problem :(... I try to define User Quotas in Dovecot (in my DB mySQL) but default quotas (in my dovecot.conf) are always set for all users. I've defined default quota to 500M. I set 0 to one account in my DB but when i see my logs, this account have a 500M quota ! Could you help me ? My configuration : # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-xenU i686 Debian 5.0.4 ext3 log_path: /var/log/dovecot.err info_log_path: /var/log/dovecot.info log_timestamp:...

...t only costs 3 seconds on Windows 7. I have two tests: 1000 files of 10k each (total ~10Mb): * Linux on localhost or a remote host (1GE or 10GE): 5.5 seconds * Windows XP - Machine #1: 24.5 seconds * Windows XP - Machine #2: 60 sec * Windows 7 - Identical hardware as XP machine #1: 3 seconds One 500MB file: * Expected result: 4-5 seconds on 1Gbit (100-125Mbyte/s) * Linux on localhost: 0.5 sec * Other Linux machine with 10GE connect: 0.9 sec * Remote Linux machine (1Gbit): 4.6 sec * Windows XP - Machine #1: 10.4 sec * Windows XP - Machine #2: 11 sec * Windows 7 - Identical hardware as XP machine...

...can do it within imap ? (I dont want to change my setup to MYSQL DB only for per-user Quota, if its possible to use a simple file with names and quota) This is the post-login script: #quotaperuser.sh #!/bin/sh case "$USER" in "ZAGH-V+username") QUOTA_RULE='*:storage=500M';; "ZAGH-V+test") QUOTA_RULE='*:storage=5000M';; esac exec /usr/local/libexec/dovecot/imap $* My Configuration: {dovecot -n} # 1.2.3: /usr/local/etc/dovecot.conf # OS: Linux 2.6.16.60-0.54.5-smp i686 SUSE Linux Enterprise Server 10 (i586) base_dir: /var/run/dovecot/ log_...

Good day, everyone. I have SAN server build with Openfiler OS, with iSCSI mode turned on. I have two nodes, which connect to that server via iSCSI, using one of two active iSCSI partitions. I've installed ocfs2 1.3.3 with kernel 2.6.23.1, configured it, made ocfs2 partition and was successful in mounting it on both nodes. Everything works just fine, I can upload file from one node and

On Sun, 4 Aug 2019, Jonathan Billings wrote: > Are you sure you don?t have other processes or users running on the system? It only happens when you have a network connection? It might also be swapping heavily, check to see how much RAM you have. Check the output of ?free?. Pretty sure. I rebooted this morning. top - 17:32:20 up 15:47, 6 users, load average: 1.12, 2.55, 1.56 Tasks: 238

...==> SSD raid1 array /dev/sdd ==> spinning raid6 array I've added "allow_mixed_block_sizes = 1" to lvm.conf to be able to add sdb and sdd in the same VG (because of the sector size missmatch). But as the LVs will only use one and only one PV I guess it's OK. # lvcreate -L 500M -n lv_cache_meta VGnfs /dev/sdb # lvcreate -l +100%FREE -n lv_cache VGnfs /dev/sdb # lvconvert --type cache-pool /dev/VGnfs/lv_cache --poolmetadata /dev/VGnfs/lv_cache_meta # lvcreate -l +100%FREE -n LVnfs VGnfs /dev/sdd # lvconvert --type cache /dev/VGnfs/LVnfs --cachepool /dev/VGnfs/lv_cache # l...

Chris Murphy wrote: > Default boot volume on Fedora is 500M, with a kernel installonly_limit > of 3. So far this seems sufficient, even accounting for the "rescue > kernel" (which is really a nohostonly initramfs, which is quite a bit > larger than the standard hostonly initramfs used for numbered > kernels). IIRC, we saw discussions...

...is 3841. So I would expect Free memory to hover around 4MB. However, instead, it seems to seek out about 150M free. If I do a dd from /dev/md0 to /dev/null, the free memory does drop to around 25MB. But then, as the system is used, it drifts back to... about 150M. Swap varies between 100M and 500M, and buffer+cache runs around 500M. I'm pretty sure that we access enough different data that it should be using some of the 150M free for buffers+cache. Swappiness is set to the default 60. Any comments? Thanks, Steve

Hi all, I have a second namespace as archive, where no quota should be active (work with type = shared). But if I change the type to private the quota will allways count. My dovecot version is the 2.0.13. I have tried things like this: plugin { quota_rule = *:storage=500M quota_rule2 = Trash:storage=+100M quota_rule3 = Sent:storage=+50M quota_rule4 = ns=archiv/%u/:ignore } It's also doesn't work with "quota_rule4 = archiv/%u/:ignore" The namespace: namespace { type = private separator = / prefix = "archiv/%u/" l...

hi would you please remove my email from the mailing list. thanks in advance Sebastien [[alternative HTML version deleted]]

...Core 2 Duo box with 2GB of ram (usually with some 1GB free) was generally below 0.4 for the last 24hrs, averaging 0.23 based on MRTG. Once I did setenforce 1, load shot through the roof to fluctuate between 3 to 5. As per my past experience setroubleshootd started chewing up ram more than 600M and 500M worth of virt and res based on top. The server started crawling and php apps stopped communicating with mysql. I had to kill setroubleshootd in order to return things to normal. This again reflects my original experience with SELinux: massive resource hog and this is just a lowly loaded webserver...

On Fri, Sep 11, 2015 at 2:45 PM, Warren Young <wyml at etr-usa.com> wrote: > 24 - 16 = 8, which sounds suspiciously like the size of a swap file. What > does mount say? What do you mean with "mount says"? Can you point me on the right command to execute?

Hi everybody, I am using the contour function to draw isobares. And i would like to to bold contours for an interval of 500m and weak contour for an interval of 100m. Can someone help me with this? Thanks a lot Karine _________________________________________________________________ [[elided Hotmail spam]] [[alternative HTML version deleted]]