search for: 500gig

Hey! I have big problem with my centos 5.1. I have two hard discs 500gig and 40gig and those are in RAID0. I would like to remowe the small 40gig hd and put new 500gig hd and i don't wan't raid0 anymore. How can i copy data from 40gig hd to 500gig hd and switch 40gig hd to new 500gig hd? Another question: Can i just copy all my files to windows laptop and if...

...s lvm2 [500.00 GB / 500.00 GB free] PV /dev/sdc VG thecus lvm2 [1010.00 GB / 910.00 GB free] PV /dev/mapper/ddf1_RAIDp2 VG VolGroup00 lvm2 [931.25 GB / 0 free] Total: 3 [2.38 TB] / in use: 3 [2.38 TB] / in no VG: 0 [0 ] [root at francois-pc ~]# lvcreate -L 500gig -n 500G freenas Insufficient free extents (127999) in volume group freenas: 128000 required Even dropping the size a bit, I get this: [root at francois-pc ~]# lvcreate -L 500gig -n 450G freenas Insufficient free extents (127999) in volume group freenas: 128000 required How do I actually cr...

Greetings, I have a 500Gig hdd with and XFS filesystem created by openfiler (which strangely switched from lovely CentOS for reasons best known to them). I fired up a Centos box with this hdd. I then did yum install kmod-xfs.i686 xfsdump.i386 dmapi xfsprogs and it wnt through. But when I try to mount this volume mount -...

I have followed the procedure on the Centos page: http://wiki.centos.org/HowTos/CentOS5ConvertToRAID My setup is slightly different. I am using two partitions, / and /home. I have setup swap as a file, /home/swapfile. My hard drives are 500Gig sda and sdb. In modifying the instructions for initializing sdb I have: used /dev/md0 for / (sdb1) used /dev/md1 for /home (sdb2) In section 3.6 The line: mount /dev/RaidSys/Root /mnt/root.new was changed to mount /dev/md0 /mnt/root.new Everything seems to go well until I get to section 4.4....

Can anyone tell me if/when the Adaptec AIC9410 SAS/SATA controller will be supported? Michael Grant

Hey All, I've been using rsync (2.6.9) to migrate a 90g message store volume and I'm running into some interesting results. I have two FC storage arrays attached to a Sunfire V280R, running Solaris 8. My 100gig volume is on a Sun StoreEdge 3510, and my new 500gig partition is on an HP EVA. I used the syntax: rsync -a --stats --delete $SRC/$dir/ $DST/$dir At present time, the destination volume is 2.5 times the size of the original volume. My first thought was this may be a drive geometry issue, and I've been working with Sun to get a solution. T...

Oddly enough, the performance of a 3Ware 9550SX controller seems to have improved when switching from 64-bit to 32-bit CentOS 5. This is a RAID0 device with 8 x 500gig barracudas and the noatime and data=writeback tweaks to that device in /etc/fstab. It's also quite a bit better than results on the same machine using CentOS 4.4 (64-bit). This partition is used to store scratch data consisting of large uncompressed video files so the fast block reads/wri...

...thought that I would throw it out there, running centos 5.4 on a tyan s4985 and I wanted to add a hot swap drive cage to it so I added a supermicro cage and bought some drives, not wanting raid but something for storage and rsync backups. Well I decided to buy some of the newer samsung F3 hd502hj 500Gig hard drives, supposedly good performance for the price since they didnt have enough of them I bought some WD black 500G drives also. Well when I got everything back together I noticed that I was getting errors when centos was first trying to boot, the error was Comreset -16 sata1.... wash and repe...

I'm using CentOS5 64bit on a system with a 3ware 9650SE card. I installed the OS using the driver disk files provided by 3ware. It worked fine with the original CentOS5 kernel. After doing a "yum update", which also installed an updated kernel, the system didn't work after a reboot, using the new kernel. I rebooted the old kernel, moved the 3w-9xxx.ko file from

...reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/500gig/xp.raw'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <address type='...

A little OT - but I've seen a few opinions voiced here by various admins and I'd like to benefit. Currently running a single combined server for multiple operations - fileserver, mailserver, webserver, virtual server, and whatever else pops up. Current incarnation of the machine, after the last rebuild, is an AMD Opteron 4180 with a Supermicro MB using ATI SB700 chipset - which

Hi all! I''ve decided to take the "big jump" and build a ZFS home filer (although it might also do "other work" like caching DNS, mail, usenet, bittorent and so forth). YAY! I wonder if anyone can shed some light on how long a pool scrub would take on a fairly decent rig. These are the specs as-ordered: Asus P5Q-EM mainboard Core2 Quad 2.83 GHZ 8GB DDR2/80 OS: 2 x

...on Board) 32-bit DDR PCI Express x16 Video Card http://www.newegg.com/Product/...tem=N82E16814121019R DVD Player $17.99 Sony NEC Optiarc Black 16X DVD-ROM 48X CD-ROM IDE DVD-ROM Drive Model DDU1615/B2s - OEM http://www.newegg.com/Product/...Item=N82E16827101131 80gig sata drive for the OS, and 4 500gig seagate 7200.10 drives. While planning this out, it seemed that all of the parts i chose are supported by solaris, please correct me if im wrong. Do you see any issues with this setup? I''m looking to build this box as cheaply as possible, BUT as reliable as possible as well. (any other su...