search for: 5000kbit

...bit # SYN/minimal payload $tcc parent 2:1 classid 2:10 htb rate 200Kbit ceil 500Kbit prio 0 $tcq parent 2:10 pfifo limit 50 # gw traffic $tcc parent 2:1 classid 2:11 htb rate 200Kbit ceil 500Kbit prio 2 $tcq parent 2:11 pfifo limit 20 # DMZ $tcc parent 2:1 classid 2:13 htb rate 3000Kbit ceil 5000Kbit prio 4 # telnet/SSH/IRC $tcc parent 2:13 classid 2:31 htb rate 300Kbit ceil 500Kbit prio 2 $tcq parent 2:31 pfifo limit 30 # UDP $tcc parent 2:13 classid 2:32 htb rate 700Kbit ceil 1000Kbit prio 3 $tcq parent 2:32 pfifo limit 30 # generic NORMAL $tcc parent 2:13 classid...

...re about it i have one question regarding how leaf classes are displayed. 1:20 is parent with many child classes, each one having it''s own sfq qdisc. When i do : # tc -s class show dev eth1 .. the output is class htb 1:4061 parent 1:20 leaf df27: prio 0 rate 128000bit ceil 5000Kbit burst 1759b cburst 7849b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) lended: 0 borrowed: 0 giants: 0 tokens: 90112 ctokens: 10289 class htb 1:4052 parent 1:20 leaf df1e: prio 0 rate 128000bit ceil 5000Kbit burst 1759b cburst 7849b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) lended: 0 borr...

...s achieved are about 3-4% less than the CEILing. Has this been your experience or am I missing something? Regards Fog_Watch. Shorewall 4.4.2.1 # egrep -v ''^#'' tcdevices 1:eth0 - 20mbit 2:ifb0 - 20mbit classify eth0 # egrep -v ''^#'' tcclasses 1 2 100kbit 5000kbit 1 default 2:20 - 100kbit 5000kbit 1 default # egrep -v ''^#'' tcrules 2:T 192.168.3.21/32 192.168.3.27/32 tcp - 5001 # egrep -v ''^#'' tcfilters 2:20 192.168.3.27/32 192.168.3.21/32 tcp 5001 The egress demonstration below indicates that throughput was 5.02mbit...

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

I''d like to implement something like SFQ, but with a cap of a rate per flow. Essentially, I''d like to be able to limit citrix connections to 30KBps without having an overall traffic flow cap for all citrix connections. Slightly preferable to this would be something that would actually work per flow instead of the stochastic algorithm. Is this possible? Thanks, Bill --

Version 3.0.5 with the two-devices setup (eth0 - net, eth1 - loc). Kernel 2.4.29 tcdevices, tcrules, and tcclasses are clones of the wondershaper example (http://www.shorewall.net/traffic_shaping.htm) with eth0 replacing ppp. With TC_ENABLED=Internal in shorewall.conf: ---- Validating /etc/shorewall/tcdevices... Validating /etc/shorewall/tcclasses... ERROR: device A seems not to be

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the