search for: 476940mb

...SE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed GEOM_MIRROR[2]: Tasting ad4. ad4: LSI (v2) check1 failed magic...

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on

...0-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 5 packets/entry by default hptrr: no controller detected. acd0: DVDR <MATSHITADVD-RAM UJ-860S/1.00> at ata0-master UDMA33 ad4: 476940MB <Seagate ST3500320NS SN05> at ata2-master SATA300 ad6: 476940MB <Seagate ST3500320NS SN05> at ata3-master SATA300 ad10: 476940MB <Seagate ST3500320NS SN05> at ata5-master SATA300 ar0: 476937MB <Intel MatrixRAID RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2...

...al Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ad4: 476940MB <Seagate ST3500418AS CC35> at ata2-master UDMA100 SATA 3Gb/s ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 acd0: DV...

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

Hi, I''m running FreeBSD 7.1-PRERELEASE with a 500-gig ZFS drive. Recently I''ve encountered a FreeBSD problem (PR kern/128083) and decided about updating the motherboard BIOS. It looked like the update went right but after that I was shocked to see my ZFS destroyed! Rolling the BIOS back did not help. Now it looks like that: # zpool status pool: tank state: UNAVAIL status:

...l> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 Looks like it's also SATA2 (SATA300) But HDD says this: ada2 at ata2 bus 0 scbus1 target 0 lun 0 ada2: <ST3500320AS SD1A> ATA-8 SATA 2.x device ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad2 At this point I've a quiestion - what's the real operation speed and why's that. And for the record - I can't switch ICH 7 to ahci due to bios limitations. And one more, I've got netbook with ICH7...

...2, ATAPI 12bytes, PIO 65534bytes) ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDS721050CLA362 JP2OA3MA> ATA-8 SATA 2.x device GEOM: new disk ada0 ada0: Serial Number JP5570HF327BDP ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <Hitachi HDS721050CLA362 JP2OA3MA> ATA-8 SATA 2.x device ada1: Serial Number JPB570HF3V4Z5D ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Com...

...rage pool version 6 acd0: DMA limited to UDMA33, controller found non-ATA66 cable acd0: DVDR <Memorex DVD+-RAM 510L v1/MWS7> at ata0-master UDMA33 ad4: 381554MB <Seagate ST3400620AS 3.AAJ> at ata2-master SATA300 ad6: 381554MB <Seagate ST3400620AS 3.AAJ> at ata3-master SATA300 ad8: 476940MB <Seagate ST3500630AS 3.AAE> at ata4-master SATA300 ad10: 381554MB <Seagate ST3400620AS 3.AAJ> at ata5-master SATA300 ad12: 381554MB <Seagate ST3400620AS 3.AAJ> at ata6-master SATA300 ad14: 381554MB <Seagate ST3400620AS 3.AAJ> at ata7-master SATA300 ipmi0: IPMI device rev. 1,...