search for: 3c905b

On Fri, 22 Oct 1999 22:33:37 +1000, samba@samba.org wrote: >Hi, > >I have problems with samba 2.0.5a amd my 3com 3c905b in 100 mbit mode: >writing performance: about 7,5 MB/s (ide hdd !!) That's pretty high! Seems you're using a switch. I just get 3,5 MB/s in both directions using 905b NIC's and a hub, +-100kb, usually reading is slightly higher than writing. (my clients are slow and I still use 1.1...

Hi, I'm trying to boot a clean machine(hostname=dgrid-5.srce.hr) with 3com 3c905b NIC (ver4.30 MBA) with pxe. Server: hostname: dgrid-1.srce.hr pxelinux.0: syslinux-2.08 tftp: tftp-hpa-0.36 dhcp server: dhcp-2.0pl5-8 Client: boot option: DHCP Client machine successfully gets pxelinux.0 and then everything stops(see listing below). I've tried with xinetd...

Hi, I've got pxelinux 2.00 working to boot rh 7.3, 8.0, and phoebe-beta pxe install images but I've recently tried to load the rh 9 pxe install images and I get this.. 4000 AX:0208 BX:0200 CX:0002 DX:0000. Any thoughts? Thanks aaron

...tency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: <available only to root> 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- L...

Hello! I have an old Dell Latitude C800 laptop (with Pentium3 CPU in it). FreeBSD 6.3-STABLE was running fine on it, but I decided to update the machine to 9.1-STABLE. Well, neither my own custom kernel, nor even the official 9.1-RELEASE CD1 would boot... In both cases the boot process runs up to detecting uhub0, then either hangs forever or shuts off after a short while. Again, I thought I

My very first xen DomU can not ping anything on my network. Well that is not entirely true, it can ping itself. I did not touch any of the scripts in /etc/xen so xen should be using bridging. My pc is running xen-unstable and uses a 3Com PCI 3c905B Just after the ''xen start'' on Dom0 brctl shows: bash-3.00# brctl show xenbr0 bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no and after DomU is started: bash-3.00# brctl show xenbr0 bridge name bridge...

Hello, Long time reader, first time poster :) I seem to be having a problem with my samba server. When doing file work, it likes to suddenly reboot... Let me rattle off hardware specs here: AMD k6-2 300, 128mb PC-100 mem, 3gb WD and 10gb WD, a 3c905b and two Netgear 310FX's, a Diamond Stealth, and a Memorex 40x cdrom. I am actually planning on taking out the second netgear card (or maybe the 3c905b). This box runs RedHat 6.1 with these services: samba, nfs, httpd(apache), bind, and dhcpd. The 10 gb hard drive has a 7gig partition setup f...

...ividual Computers - Jens Schoenfeld Intel 537 (rev 0). IRQ 17. Master Capable. Latency=32. Min Gnt=1.Max Lat=128. I/O at 0xdc00 [0xdcff]. Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000fff]. Bus 0, device 13, function 0: Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 36). IRQ 18. Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0xe000 [0xe07f]. Non-prefetchable 32 bit memory at 0xe8001000 [0xe800107f]. Bus 1, device 0, function 0: VGA compatible controller: nVidia Corporation NV17 [GeForce4 M...

Hi Yum has just updated 5 of my Linux boxes running CentOS 4.3 to the 2.6.9-42 kernel. All is well on four of the boxes, but on the fifth the network card (eth0) will not work. I've downgraded the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic

...om 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux (stock RH 9 kernel) Asterisk: Asterisk CVS-10/22/03-14:42:42 built by root@ucrpsmb01.spang.com on a i686 running Linux Spandsp: built from spandsp-20031021.tgz Hardware: Dell Dimension 4100, IDE HD, PIII-933Mhz, 512MB RAM, 3Com 3C905B-TX NIC /etc/asterisk/zapata.conf (for X100P): echocancel=no echocancelwhenbridged=no context=demo callerid=asreceived signalling=fxs_ls channel => 1 Cat /proc/interrupts: CPU0 0: 319219 XT-PIC timer 1: 106 XT-PIC keyboard 2: 0 X...

...troller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01) 00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)

...to make sure that ARP queries are responded to. The "0001 err" return status is simply indicating "no packet". This proves my point that Etherboot's PXENV_UDP_READ routine is non-blocking, at least. We need to isolate the cause of the problem. Are you able to try the 3C905B in your old 486DX machine, or the NE2000 in the Athlon? At the moment you have too many variables to be able to identify a single cause. Michael

Hi, I have successfuly use PXElinux to boot a diskless workstations from two 3COM NICs. I had to do as you suggested and upgrade them both to 3COM's MBA v4.30. After, flashing the bootproms - no problems at all! 3c905B-TX 3c905C-TX just for your info: The B card has a optional bootprom chip that you must purchaced and installed on the NIC The C card come with the bootprom as part of the NIC Thanks for your great program! jan-marie ______________________________________________________________________ Talent d...

...an NT4 Sp4 workstation for testing. using tar c /some/local/dir using the default config except for machine name and workgroup in smb.conf I've tried tweaking the smb.conf to no avail. running on Redhat 6.0, but using samba 2.0.4b for the large filesystem patch... running on 100bt switched with 3c905B 100bt cards on both ends, but problem occurs to other 100bt systems as well. This is a FAT filesystem (no security) and no files are in use. It happens on every 100bt NT machine I try it on at different levels of load. The problem does not occur if the machine making query's is slowed down suf...

...ysrq+b the machine. There was no entries in the log /var is mounted rw,sync to try and catch this kind of thing also remote logs showed nothing either, Relivent (or not) info: root@night-shade:~> uname -a Linux night-shade 2.3.6ac1 #16 SMP Sun Jun 20 00:16:37 BST 1999 i686 unknown eth0: 3Com 3c905B Cyclone 100baseTx at 0xe800, 00:a0:24:50:09:61, IRQ 18 The server (hemlock) is on a different broadcast subnet to the client (night-shade) so no windows "I'm going away now" messages would get to it No processes were running on the mounted fs Samba version 2.0.3 Any suggestions...

Samba users: We have a client we are trying to resolve some Samba transfer problems with. We currently are using a 3Com 3C905B 10/100 NIC which has been successfully configured and works at 100Mbps but doesn't seem to be transferring at what it could be. >From posting another problem I had with a network program, another Samba user mentioned that the 3Com cards don't work best with Samba and recommended an Inte...

...a > 90MB file > from the samba server but I can download it via http in no time. > > > peter wrote: > > >Hello, > > > >I finally got round to running the tests with other NICs, > and I think I've > >solved the problem! > > > >With a 3c905B I get: > > > >SMB - 7.2 MB/s (45% CPU usage) > >FTP - 9.9 MB/s > > > >And with a DEC 21140 based card I get: > > > >SMB - 5.8 MB/s (36% CPU usage) > >FTP - 7.5 MB/s > > > >When compared to what I was getting (1.6 MB/s) with the NIC > t...

As promised, the updated if_xl with full busdma support / other improvements has been MFC'd to 4.8-stable. While I have put this driver through extensive testing, it is possible that there may be bugs which are either present in the -current version or that I added in the MFC process. So, if you cvsup to -stable anytime in the future and notice problems with if_xl, please tell me ASAP!

...rd anything after giving its NICs my made-up MAC Addresses. When I put the MAC Addresses back to their "real" values, the firewll forwards again. >From the internal host, arp -a shows what it is supposed to show. The firewall is running 2.4.27 from kernel.org. I am using 3Com 3C905B NICs. /proc/sys/net/ipv4/ip_forward is 1. What am I missing? Why does changing MAC Addresses mess up forwarding? Thanks - Greg Scott