search for: 300s

...3600s ipc_ttl = 1000s line_length_limit = 2048 lmtp_bind_address = lmtp_bind_address6 = lmtp_cname_overrides_servername = no lmtp_connect_timeout = 0s lmtp_connection_cache_destinations = lmtp_connection_cache_on_demand = yes lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_defer_if_no_mx_address_found = no lmtp_destination_concurrency_limit = $default_destination_concurrency_limit lmtp_destination_recipient_limit = $default_destination_recipient_limit lmtp_discard_lhlo_keyw...

HI, > You could set > > syslog_facility = local5 > > and have all the log messages in the messages file. According to the output of command # doveadm log find every type of message goes to the file I was looking at, "/var/spool/maillog". >> So, is it postfix doing the local mail delivery, not dovecot? >> > To answer this question please post relevant

...onnection = yes lmtp_connect_timeout = 0s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_destination_concurrency_limit = $default_destination_concurrency_limit lmtp_destination_recipient_limit = $default_destination_recipient_limit lmtp_lhlo_timeout = 300s lmtp_mail_timeout = 300s lmtp_quit_timeout = 300s lmtp_rcpt_timeout = 300s lmtp_rset_timeout = 120s lmtp_sasl_auth_enable = no lmtp_sasl_password_maps = lmtp_sasl_security_options = noplaintext, noanonymous lmtp_send_xforward_command = no lmtp_skip_quit_response = no lmtp_tcp_port = 24 lmtp_xforwa...

...ecot: lmtp(16824): Disconnect from 155.54.211.186: Connection closed (in reset) So the mail seems to be correctly delivered in about 30 seconds. All my postfix timeouts are bigger than this time: lmtp_connect_timeout = 0s lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_lhlo_timeout = 300s lmtp_mail_timeout = 300s lmtp_pix_workaround_delay_time = 10s lmtp_pix_workaround_threshold_time = 500s lmtp_quit_timeout = 300s lmtp_rcpt_timeout = 300s lmtp_rset_timeout = 20s lmtp_s...

...= any lmtp_assume_final = no lmtp_bind_address = lmtp_bind_address6 = lmtp_body_checks = lmtp_cname_overrides_servername = no lmtp_connect_timeout = 0s lmtp_connection_cache_destinations = lmtp_connection_cache_on_demand = yes lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_defer_if_no_mx_address_found = no lmtp_delivery_slot_cost = $default_delivery_slot_cost lmtp_delivery_slot_discount = $default_delivery_slot_discount lmtp_delivery_slot_loan = $default_delivery_slot_loan...

I'm just not entirely clear from the man page.. does the timeout start counting from the last communication, or does it start counting from the beginning of the transmission? also, if the server is set to timeout at, say, 300s, and it's busy moving stuff around but not talking to the client, does the timeout start counting? So if it takes 300s to move a file out of a partial-dir (just pretend), would the server timeout? Thanks -Eric

..._address = lmtp_bind_address6 = lmtp_body_checks = lmtp_cname_overrides_servername = no lmtp_connect_timeout = 0s lmtp_connection_cache_destinations = lmtp_connection_cache_on_demand = yes lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_count_limit = 0 lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_defer_if_no_mx_address_found = no lmtp_delivery_slot_cost = $default_delivery_slot_cost lmtp_delivery_slot_discount = $default_delivery_slot_discount lmtp_delivery_slot_loan = $default_delivery_slot_loan...

...$ APPT_TYP_CD_LL : Factor w/ 3 levels "FX","IN","IP": 2 2 2 2 2 2 2 2 2 2 ... $ ORG_NAM_LL : Factor w/ 18 levels "Business","Chief Financial Officer",..: 11 7 7 9 4 4 18 18 8 4 ... $ NEW_DISCIPLINE : Factor w/ 15 levels "100s","300s",..: 14 6 4 1 11 11 14 2 1 1 ... $ SERIES : Factor w/ 10 levels "100s","300s",..: 9 6 4 1 9 9 9 2 1 1 ... $ AGE : int 62 53 46 62 55 59 50 36 34 53 ... $ SERVICE : int 13 29 16 26 18 9 19 11 8 26 ... $ AGE_SERVICE : int 75 82 62 87 73 69...

...= any lmtp_assume_final = no lmtp_bind_address = lmtp_bind_address6 = lmtp_body_checks = lmtp_cname_overrides_servername = no lmtp_connect_timeout = 0s lmtp_connection_cache_destinations = lmtp_connection_cache_on_demand = yes lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_defer_if_no_mx_address_found = no lmtp_delivery_slot_cost = $default_delivery_slot_cost lmtp_delivery_slot_discount = $default_delivery_slot_discount lmtp_delivery_slot_loan = $default_delivery_slot_loan...

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I do...

Hi all.... I'm using asterisk for making PSTN calls from extensions registered on OpenSIPS...In peak hours ,number of calls Increase dramatically to a non logic number..When checking the calls using asterisk CLI I saw a lot of calls in ringing status and after 300s(rtphold timeout), asterisk release all calls...I checked the log file and found.. [Feb 28 11:34:14] NOTICE[19197] chan_sip.c: Disconnecting call 'SIP/netcafe2-b7da99b8' for lack of RTP activity in 301 seconds After that the log show: [Feb 28 11:41:12] WARNING[19197] chan_sip.c: Remote host...

This morning I''ve had both my infiniband and tcp lustre clients hiccup. They are evicted from the server presumably as a result of their high load and consequent timeouts. My question is- why don''t the clients re-connect. The infiniband and tcp clients both give the following message when I type "df" - Cannot send after transport endpoint shutdown (-108). I''ve

I'm having an issue with some Snom 300s on a server running Asterisk version 13.9.1, Dahdi 2.11.1 w/OSLEC and pjsip 2.5.1. There is _*NO NAT*_ involved. Phones and server are plugged into the same network switch, all on the same IP range. The server is running a Wildcard AEX410 analog card with 2 FXO modules receiving incoming ana...

...s upsmon 2.0.2 Using power down flag file /etc/killpower Fatal error: insufficient power configured! Sum of power values........: 0 Minimum value (MINSUPPLIES): 1 Edit your upsmon.conf and change the values. Network UPS Tools upslog 2.0.2 logging status of backups@localhost to /var/log/ups.log (300s intervals) Warning: initial connect failed: Connection failure: Connection refused everytime I run nut.sh start. my ups.conf: [hiveups] driver = cyberpower port = /dev/cuac02 # com3 on my cyclades board. didn't work on my motherboard's port, so I threw in the old card...

...s upsmon 2.0.2 Using power down flag file /etc/killpower Fatal error: insufficient power configured! Sum of power values........: 0 Minimum value (MINSUPPLIES): 1 Edit your upsmon.conf and change the values. Network UPS Tools upslog 2.0.2 logging status of backups@localhost to /var/log/ups.log (300s intervals) Warning: initial connect failed: Connection failure: Connection refused everytime I run nut.sh start. my ups.conf: [hiveups] driver = cyberpower port = /dev/cuac02 # com3 on my cyclades board. didn't work on my motherboard's port, so I threw in the old card...

If it's already been covered, please forgive the repetition. I searched Mantis, but couldn't come up with anything. We upgraded to Asterisk 1.2.6, and suddenly the Polycom MWI stopped working on SP IP 300s and 600s. All of them. I tried splitting the friend entries in sip.conf into user and peer. I made sure the context of the voicemail box was on the end of the mailbox option in the sip.conf file. I checked and rechecked the config files for the phones. Nothing worked to restore the MWI's u...

...sions, regardless whether we run upsmon in the daemon or debug mode: Running upsc socomec at ip_socomec returns a list of all required values. OTOH, we find on all clients the folloging logs: upsmon[1608]: UPS socomec at ip_socomec is unavailable This appears regularly each little bit more than 300s and corresponds to the NOCOMMWARNTIME in the upsmon.conf. The log entry appears only for the Socomec UPS, not for the Galaxy. The process list shows that /sbin/upsmon is forking occasionally, generating a child in the Z state root 3294 0.0 0.0 10448 704 ? Ss 14:02 0:00 /sb...

...g it took to render all images of the first 10 seconds (unless changed via --time). As a total unscientific test, I took Mariorush [3] and tested it with 3 different options both with the old (first result) and Claudio's rewritten (second result) cairo-directfb backend. Results were as follows: 300s - 162s - normal playback 300s - 162s - playback with environment variable CAIRO_DIRECTFB_NO_ACCEL set 420s - 172s - playback with -p option, which uses a primary DFB surface What do I learn from that? Acceleration does not work - at least not the acceleration provided by the Renesas chip. So there...

...Inbox mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename append sieve = file:~/sieve;active=~/.dovecot.sieve sieve_execute_bin_dir = /usr/lib/dovecot/sieve sieve_extensions = +vnd.dovecot.debug sieve_filter_bin_dir = /usr/lib/dovecot/sieve sieve_filter_exec_timeout = 300s sieve_filter_input_eol = lf sieve_global = /usr/lib/dovecot/sieve sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute +vnd.dovecot.filter sieve_pipe_bin_dir = /usr/lib/dovecot/sieve sieve_pipe_exec_timeout = 300s sieve_pipe_input_eol = lf sieve_plugins = sieve_extprograms } post...

...g apt. I configured NUT to run as a netserver, installed the ESXi nut .vib, configured the shutdowncmd in the VM to do nothing, so that the ESXi host would close that virtual machine last and only before it would shut down, it would call the poweroff command. I set the offdelay option of the ups to 300s and ondelay option to 600s and here comes in my problem, whenever the battery.low condition or the upssched script calls the FSD action, everything will beging to shut down normally, except that the UPS will turn off the load in about 100 seconds (while the ESXi host still needs over a minute to sh...