Displaying 20 results from an estimated 20 matches for "3000va".
Did you mean:
1000va
2012 Feb 02
2
APC SmartUPS 3000VA LCD not connecting
We recently had to replace an old APC SmartUPS 3000 with a newer 3000VA
(the 2U one). It has both serial and USB in the back (with an RJ-45 on
the end of the serial cable).
I can't get the apcsmart driver to connect. I figured it should work
the exact same as the old UPS, with /dev/ttyS0 as the port (I'm using
the same port on the server that the last on...
2012 Nov 17
1
[HCL] Aviem Power RT 1000-3000VA supported by blazer_ser
Manufacturer: Aviem Power RT 1000-3000VA
Description: Rack/Tower Intelligent Online LCD UPS.
connected with serial cable.
#upsc
battery.voltage: 24.96
battery.voltage.low: 21.5
battery.voltage.nominal: 24.0
beeper.status: enabled
device.mfr:
device.model:
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver....
2007 Nov 02
6
PowerWare 9120 via USB?
...ntroller 2.0.4
Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4)
Communications with UPS lost: Receive error (Request command): BLOCK: 0, COMMAND: 31!
Communications with UPS lost: checksum error!
Communications with UPS lost: Receive error (Request command): BLOCK: cb, COMMAND: 31!
Model = PW9120 3000VA
Firmware = 02.60
Shutdown delay = 120 seconds
Communications with UPS lost: Receive error (Request command): BLOCK: fa, COMMAND: 3c!
Communications with UPS lost: Receive error (Request command): BLOCK: 81, COMMAND: 33!
When looking at the combatability chart at http://www.networkupstools.org/c...
2011 May 30
2
UPS Liebert GXT3 config
Hi all,
I?ve a UPS Liebert GXT3 500-3000VA with USB port.
I?ve install NUT version 2.2.2 from repository packages for Debian Lenny.
Linux kernel 2.6.26
I?ve try to use usbhid-ups driver in ups.conf
[liebert]
driver=usbhid-ups
port=/dev/usb/hiddev0
Debian get the usb:
# lsusb -v
Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure I...
2007 Apr 17
1
HP R3000 XR, warning or perhaps error
...CP UPS driver 0.11 (2.0.5)
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS re-established
Connected to UPS on /dev/ttyS0 baudrate: 9600
Model = HP R3000 XR 3000VA
Firmware = Inve:01.09 Netw:03.60
Shutdown delay = 120 seconds
#
It all seems to work but the initial errors or warnings concern me. I'm
running stable 2.05 built from source.
Thanks,
Greg.
2005 Jul 04
1
Powerware 5119 = Exide NETUPS SE = Deltec name was PowerRite Pro II
...omeone might want to add this to the docs - cable list and compatibility list
- took me way to long to find.
I was trying to find information on my UPS and came up with the following names
for the same UPS series.
Powerware 5119
Exide name was NetUPS SE
Deltec name was PowerRite Pro II
(1000VA-3000VA)
What I have:
The Exide NETUPS SE
model PRC2400a
p/n 05144038-3904
OUTPUT 2400VA 1600 WATTS
----------------------------------------------------------------
Karl Schmidt EMail Karl@xtronics.com
Transtronics, Inc. WEB http://xtronics.com
3209 West 9th Street...
2011 Nov 03
2
Socomec UPS
Hi,
I am considering purchasing a UPS and want one that I can query from
bash scripts. I would assume nut to be the best tool to allow this. I
have been directed to a Socomec RT 3000VA UPS.
I have previously had MGE Pulsars and interfaced to them with nut's
mge-utalk and mge-shut drivers with reasonable success, apart from the
odd data stale error.
These Socomec units have RS-232 connectors and claim to support JBUS.
On the nut compatibility page I only see one Socomec mode...
2014 May 27
1
Masterguard UPS A3000
...ifferent things, this
is where I have ended up.
First, environment:
OS: Linux (Debian Stable)
NUT Version: 2.7.2-1 (Debian unstable package)
UPS details (on the rear lable):
Manufacturer: Masterguard GmbH 11-04 (assuming this means manufactured
in November 2004)
UPS Type: UPS A3000
Rated Power: 3000VA/2100W
Extra Battery:
Chloride Power Protection
Model: BP ACTIVE 3000
Product Code: 570227.101 B
Manufacturer: Masterguard GmbH 07-05 (assuming this means manufactured
July 2005)
UPS Type: BP A3000
/lib/nut/usbhid-ups -DDDD -a upsA -x vendorid=06da -x productid=0002
Network UPS Tools - Generic H...
2007 Jan 15
5
Network UPS Tools version 2.0.5 released
Network UPS Tools version 2.0.5 has been released.
http://www.networkupstools.org/
Direct access:
- Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz
- News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt
- ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog
2007 Jan 15
5
Network UPS Tools version 2.0.5 released
Network UPS Tools version 2.0.5 has been released.
http://www.networkupstools.org/
Direct access:
- Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz
- News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt
- ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog
2012 Apr 23
1
Advice on small office UPS
...t Eaton, and specifically the :
Eaton 5PX 2200IRT
However, before realising Eaton have a UPS selector to gauge
rating/size, I was using the APC UPS selector to check. With my
servers, switch and phone system, it was suggesting UPS systems like :
Smart-UPS 2200VA LCD
Smart-UPS XL 2200VA
Smart-UPS 3000VA LCD.
This includes adding the 2 extra servers I list above (Dell PE1800 and the HP).
The Eaton UPS selector is very similar but seems to be suggesting
quite different, larger, more expensive UPS systems like :
Eaton 9170plus 3kVA HW
Not only larger, but quite a bit more expensive.
The Eaton 5P...
2014 May 05
1
communication problems with eaton 9130 over usb
...s.status: OB
ups.vendorid: 0463
If i restart /etc/init.d/nut-server stop and start, then other times it
gives, actually it is most frequent output
# upsc eaton-9130
battery.charge: 93
battery.charge.low: 20
battery.runtime: 64395
battery.type: PbAc
device.mfr: EATON Powerware
device.model: 9130 3000VA-T
device.serial: GG414A0357
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.6.4
driver.version.data: MGE HID 1.31
driver.version.internal: 0.37
input.frequency: 49.9
input.transfer.high: 276
inpu...
2014 Sep 19
0
[HCL] Eaton Powerware 9125 2500U supported by USB
On Sep 19, 2014, at 4:03 PM, Nello Lucchesi <nello at octobergroup.com> wrote:
> I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server.
>
> I looked a the list and didn't see a driver for it:
>
> http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton
>
> I see a
2010 May 28
0
Liebert GXT2 Support
Good Day,
I was wondering what the status was on support for the Liebert GXT2
family of UPS units? I've noted that the contact closure mode is
supported along with experimental support for the 3000VA/230v model
which I assume is the serial 'smart' signaling?
I have several GXT2-1500's which I'm interested in getting supported
in Linux and, as I have access to both the USB & SNMP expansion
boards, I'm willing to volunteer one of them as a test bed for the
GXT2 driver(s)....
2014 Sep 19
2
[HCL] Eaton Powerware 9125 2500U supported by USB
I'm looking for a driver for and old uninterruptible power supply (UPS),
Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server.
I looked a the list and didn't see a driver for it:
http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton
I see a driver for the 9130; any idea whether it will work with a 9125?
Any other ideas for connecting the 9125 to a FreeNAS
2006 Apr 26
1
RE nut 2.0 fentonups and Xanto S3000R
...nning Brauer <henning@cvs.openbsd.org>
Objet
nut 2.0 fentonups
this allows the model to be forced for the fentonups driver. I have a
UPS that does not respond to I, but otherwise perfectly follows the
fenton protocol. this makes it work.
the Xanto S3000R is a rackmount 2U UPS, online, 3000VA, which requires
and external 2U battery pack. The manufacturer is www.online-usv.de
<brahe@paploo:59>$ sudo ./fentonups -x model=XS3000R /dev/ttym1
Network UPS Tools - Fenton UPS driver 1.21 (2.0.0)
Detected Xanto S3000R on /dev/ttym1
<brahe@paploo:61>$ upsc UPS-3@localhost
battery.ch...
2016 Dec 25
3
Noise Cancellation of Server Noise
...uite this big, or as densely
populated, since its not in a dedicated server room, but still, it has a
lot more than a couple fans to silence. my rack there has 8 servers, 2
additional disk trays, and about 200 disk drives, also a pair of 7000 VA
UPS's in the bottom (actual load was around 3000VA)
--
john r pierce, recycling bits in santa cruz
2008 Oct 27
1
Megatec and Batteries
...48V
On-Line 1000VA 3 (12V) 36V
On-Line 2000VA 6 (12V) 72V
On-Line 3000VA 8 (12V) 96V
On-Line 5000VA 20 (12V) 240V
Since battery is electro-chemical element it doesn't have constantly rated voltage. It'...
2006 Jul 24
2
fentonups driver patch for Effekta MHD3000 UPS
...170, 190, 240, 280, 0, 0 },
/* Unitek data from Antoine Cuvellard */
{ "UNITEK Alph1000iS A0", "Unitek", "Alpha 1000is",
! 9.6, 2.4, 9.6, 2.4, 158, 172, 288, 290, 0, 0 },
!
! /* Effekta MHD3000 */
!
! { "ON-LINE 3000VA D30R355", "Effekta", "MHD3000",
! 1.67, 0.6, 1.67, 0.6, 160, 160, 275, 275, 1, 1 },
{ NULL, NULL, NULL, 0, 0, 0, 0, 0, 0, 0 }
};
2016 Dec 24
10
Noise Cancellation of Server Noise
Has anyone come across a device that could cancel out the noise from servers, ie. the fan noise? I have a server rack near my office and would like to see if i can decrease the noise level. It would seem to me that the steady drone of the fans could be cancelled out to a large extent.