search for: 2sec

...is up to date ("MAKE"); i.e., after make has checked all 800 or so source files it tells you that there is nothing to do. I am afraid my timings speak for themselves: CP-A MAKE local disk < 5sec < 0.3sec NFS (100MBit) 55sec+-2sec < 2sec glusterfs (I) 4m29sec 17sec glusterfs (II) 4m05sec 18sec (I) unpatched fuse.ko, (II) patched fuse.ko, both over the same network as NFS. Note that in (II) the modified kernel module was used with the default (distribution provided) libfuse...

...single core / for traffic control . I use Deban Linux for my router. Can I expect problems with HTB and iproute 2 over ATHLON DUAL CORE/BOX or single box ? Currently my problem is that i have too big system load over CPU / 60-80%/ and packet dropping. at every 15-20sec i have traffic freeze for 1-2sec. when more users are online. Regards foxy202 _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I had some some weird issues with the last patch but the latest one is bad. If I click on my action bar the screen will pause for about 2sec/+, I try to pan camera same problem. In auto-run it's happens about once every 30s, in manual run forward it's about every 10s. It all started with 1.1.28, now how do I go back to an older version?

Did anybody tried MozIAX extension? It is Mozilla IAX2 soft-phone. http://moziax.mozdev.org/ I tried it yesterday on eee pc, connected to asterisk on local LAN and the performance is terrible! The delay is about 2sec or 3sec. and very bad echo. I think it is the implementation of their IAX2 in their add on, as I have tried external mic. and the same delay problem. As a comparison I've tried DIAX over dial-up connection and the voice quality was acceptable with very little delay. -- #Joseph GPG KeyID: ED...

Dear R users, I have copied for following table from an article on "Using confidence intervals in within-subject designs": Subject 1sec 2sec 5sec 1 10 13 13 12.00 2 6 8 8 7.33 3 11 14 14 13.00 4 22 23 25 23.33 5 16 18 20 18.00 6 15 17 17 16.33 7 1 1 4 2.00 8 12 15 17 14.67 9 9 12 12 11.00 10 8 9 12 9.67 I rearranged the data this way: >subject<-factor(c(1,2,3,4,5,6,7,8,9,10,1,2,3,4,5,6,7,8,9,10,1,2,3,4,5,6,7,8,9,10)) >conditio...

...lor="#ffffff" text="#000000"> <font size="+1">Hi, <br> <br> Is there a way to make tick-n probe user defined so that user can enter the sampling rate at the command line and no need to change the Dtrace script. I am looking for something like tick-$2sec so that user can see the result at the interval of every 5, 10, 15, 20, 50, 100 etc. sec depending on what he provides as the second argument on command line. <br> <br> Thanks,<br> Ashu.<br> </font> </body> </html>

...rking and one day with no changes *poof* it stopped working and hasn't worked for months. The only common factor is Asterisk 1.4.x (always try to use the latest version) and NAT. I've tried: -Linksys ATA -Grandstream ATA -Audicodes ATA All do the same thing. Call connects, hear the first 2sec of fax tone and then just silence, but the call usually stays open. I've tried two T.38-capable providers. I've tried two different routers: -Linksys WRT54GS running DD-WRT (Linux) -Dell Optiplex 170L running PFSense (BSD) Different Linux distros on the servers: -SuSE 64bit -RHEL 32bit -...

...folder via samba (/export) In that folder there is a automount-entry for my usbstick (/export/usbstick) On another host i can mount the export with mount.smbfs As soon as I access the stick (so automount gets active) i cannot umount the share. Get error: device is busy (automount timeout is set to 2sec.) When i never access the stick (automount is still waiting), a umount is no problem. any suggestions? Jan

...nc generates before being transfered? If not, is there a chance to let the file compressed on the target machine? I want to make some tests, also with the compression ratio. I made a test and transfered a 1GB file. I changed the timestamp with the touch command and rsync needs with the -c Option 42sec and without 80sec! I expected it viceversa! How can it be?! (I made the test several times) I also changed the user rights with chmod. Here the result were what I expected! Rsync needed 45sec with the -c Option, and 2sec without! Again, thank you for spending time to answer! David ____________...

...t mangle -o eth0 -s 192.168.1.1 -j MASQUERADE iptables -A PREROUTING -t nat -i eth0 -d 192.168.1.1 -s a.b.c.d -j MARK --set-mark 56 iptables -A PREROUTING -t mangle -i eth0 -d 192.168.1.1 -s ! a.b.c.d -j MARK --set-mark 52 ###--32kbps for x-LAN tc class add dev eth4 parent 5:1 classid 5:191 est 2sec 10sec cbq bandwidth 512Kbit rate 32Kbit allot 5\1514 weight 3.2Kbit prio 2 maxbrust 5 avpkt 1500 bounded tc qdisc add dev eth4 parent 5:191 sfq perturb 10 tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 51 fw flowid 5:191 tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 52...

...can help to save quite a lot of CPU cycles and > > network bandwidth. We put guest's free page information in bitmap and > > send it to host with the virt queue of virtio-balloon. For an idle 8GB > > guest, this can help to shorten the total live migration time from > > 2Sec to about 500ms in the 10Gbps network environment. > > I just read the slides of this feature for recent kvm forum, the cloud > providers more care about live migration downtime to avoid customers' > perception than total time, however, this feature will increase downtime > when...

...can help to save quite a lot of CPU cycles and > > network bandwidth. We put guest's free page information in bitmap and > > send it to host with the virt queue of virtio-balloon. For an idle 8GB > > guest, this can help to shorten the total live migration time from > > 2Sec to about 500ms in the 10Gbps network environment. > > I just read the slides of this feature for recent kvm forum, the cloud > providers more care about live migration downtime to avoid customers' > perception than total time, however, this feature will increase downtime > when...

If i try to connect as root (dovecto 1.0) with wrong password doveco exit with an auth error robyt:~# telnet dns pop3 Trying x.x.x.x Connected to dns. Escape character is '^]'. +OK Dovecot ready. user root +OK pass [wrong] -ERR Authentication failed. but if the password is correct dovecot exit but with another error: user root +OK pass [correct] -ERR [IN-USE] Internal login failure.

...1.22 1.38 3.79 3.80 3.80 8000 52.06 63.43 67.61 1.46 1.63 1.69 6.38 6.41 6.58 10000 84.06 98.17 118.94 1.93 2.01 2.13 9.78 9.79 9.81 That is, the computation of the sums of the rows of a 10000x10 matrix with apply takes about 100sec on average, where a simple for-loop does the same job in about 2sec. The next table shows for every method the relative increase of time as compared to the increase of the number of rows. n M1 M2 M3 1 1 1 1 2 3.221 2.025 2.952 3 6.764 3.050 6.032 4 15.247 4.075 10.175 5 23.599 5.025 15.540 You can see that the time for M2 (for-loop with memory allocated at...

...NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. First issue: whatever I set as the offdelay, seems to be ignored and the UPS just cuts the power about 2sec after receiving the shutdown command. Second issue: When the UPS is on battery power and I issue the shutdown, it goes off, but after about 15sec it comes back on even while still on battery power. I tried setting ondelay to -1 and while that keeps the USV off, when the power comes back, the US...

...answers and details inline. On 22.1.2015 04:46, Charles Lepple wrote: > On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> > wrote: > >> First issue: whatever I set as the offdelay, seems to be ignored and >> the UPS just cuts the power about 2sec after receiving the shutdown >> command. > > What values have you tried? I wonder if it is rounding down to 0 > seconds. Great idea! I did some testing and it appears anything lower than 60 for offdelay simply gets ignored. In fact, setting offdelay to 60sec also fixes the secon...

...Sorry this reply wasn't as quick. > On 22.1.2015 04:46, Charles Lepple wrote: >> On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: >>> First issue: whatever I set as the offdelay, seems to be ignored and the UPS just cuts the power about 2sec after receiving the shutdown command. >> What values have you tried? I wonder if it is rounding down to 0 seconds. > Great idea! I did some testing and it appears anything lower than 60 for offdelay simply gets ignored. In fact, setting offdelay to 60sec also fixes the second issue. Even w...

...gt; data processing, this can help to save quite a lot of CPU cycles and > network bandwidth. We put guest's free page information in bitmap and > send it to host with the virt queue of virtio-balloon. For an idle 8GB > guest, this can help to shorten the total live migration time from 2Sec > to about 500ms in the 10Gbps network environment. I just read the slides of this feature for recent kvm forum, the cloud providers more care about live migration downtime to avoid customers' perception than total time, however, this feature will increase downtime when acquire the benefit...

...help to save quite a lot of CPU cycles and > network bandwidth. We put guest's unused page information in a > {pfn|length} array and send it to host with the virt queue of > virtio-balloon. For an idle guest with 8GB RAM, this can help to shorten > the total live migration time from 2Sec to about 500ms in 10Gbps network > environment. For an guest with quite a lot of page cache and with little > unused pages, it's possible to let the guest drop it's page cache before > live migration, this case can benefit from this new feature too. I agree that both changes make...

...216.168.105.33: icmp_seq=0 ttl=255 time=6sec > 64 bytes from 216.168.105.33: icmp_seq=1 ttl=255 time=5sec > 64 bytes from 216.168.105.33: icmp_seq=2 ttl=255 time=4sec > 64 bytes from 216.168.105.33: icmp_seq=3 ttl=255 time=3sec > 64 bytes from 216.168.105.33: icmp_seq=4 ttl=255 time=2sec > 64 bytes from 216.168.105.33: icmp_seq=5 ttl=255 time=1sec > 64 bytes from 216.168.105.33: icmp_seq=6 ttl=255 time=242usec > 64 bytes from 216.168.105.33: icmp_seq=7 ttl=255 time=250usec > ... Yes, and I know just how to make it happen. You put ping packets and some other type o...