search for: 2a01

Hello, it seems I cannot use: $ ssh -J root at 2a01:4f8:1c1e:528d::1 root at west-coast Invalid -J argument (The west-coast is stored on the jump host in between in /etc/hosts.) $ ssh -J root at 167.235.141.44 root at west-coast Works as expected. Also $ ssh root at 2a01:4f8:1c1e:528d::1 does work as expected. I do have native IPv6. This is o...

...ng fine but after the upgrade to 2.3.11 it stopped working. On thing I see on the logs is that the user field comes up empty when compared to the 2.3.10. Example: 2.3.10: Sep 14 13:39:20 mail.r3pek.org dovecot[10189]: imap-login: Login: user=<r3pek at r3pek.org>, method=GSSAPI, rip=xxxx, lip=2a01:4f8:1c17:61c0::1, mpid=10195, TLS, session=<PaDSUkWvAOkgAQgY3LZuALKwbzMw3BW/> 2.3.11: Sep 14 12:19:24 mail.r3pek.org dovecot[9264]: imap-login: Disconnected (auth failed, 1 attempts in 6 secs): user=<>, method=GSSAPI, rip=2001:818:dcb6:6e00:b2b0:6f33:30dc:15bf, lip=2a01:4f8:1c17:61c0::...

...expire = pgsql:/usr/local/dovecot/etc/dovecot/sql-dict.conf.ext quota = pgsql:/usr/local/dovecot/etc/dovecot/sql-dict.conf.ext } disable_plaintext_auth = no first_valid_gid = 5000 first_valid_uid = 5000 hostname = mx.warenform.de last_valid_gid = 5000 last_valid_uid = 5000 listen = 178.63.63.151 2a01:4f8:121:c5::2 mail_gid = vmail mail_location = maildir:/var/vmail/%d/%n/Maildir mail_plugins = autocreate quota expire acl mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeri...

On Wed, 2024-03-13 at 11:41 +0000, Job Snijders wrote: > On Wed, Mar 13, 2024 at 12:19:24PM +0100, Adam Kalisz wrote: > > it seems I cannot use: > > > > $ ssh -J root at 2a01:4f8:1c1e:528d::1 root at west-coast > > Invalid -J argument > > Try this: > > ??? $ ssh -J root@[2a01:4f8:1c1e:528d::1] root at west-coast Thank you all for helping with the syntax. > Literal IPv6 addresses should be enclosed in square brackets, to > avoid > ambiguity...

...by service { executable }", was an interesting error: "doveconf: Error: duplicate listener: 198:" The broken parts of the converted configuration: # 2.0.beta4 (84ffb38839b9): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-trunk-amd64 x86_64 Debian squeeze/sid listen = 192.168.111.222 [2a01 service imap-login { inet_listener imap { port = 198 } } service managesieve-login { inet_listener managesieve { port = 198 } } service managesieve { executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/managesieve } service pop3-login { inet_listener pop3 { port = 198 }...

...f regardless of family > >> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 >> inet 178.79.185.217 netmask 255.255.255.0 broadcast 178.79.185.255 >> inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid 0x20<link> >> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid >> 0x0<global> >> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) >> RX packets 9903 bytes 1088621 (1.0 MiB) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 7786...

Hi, Thanks for the beautiful product, i use it for a long time. Very stable! I would like in a new version that IPv6 fully works like IPv4 <bind-address>. Now we can only use :: With multiple interfaces the use it all on that port, this is difficult for multi icecast account on same server. Best regards, Michel -------------- next part -------------- An HTML attachment was scrubbed...

...> I'm not exactly sure what your problem is. Icecast supports binding to > several addresses individually. E.g. this works for me: > <listen-socket> > <bind-address>::1</bind-address> > </listen-socket> > <listen-socket> > <bind-address>2a01:*:*:*:*:*:6453:40a1</bind-address> > </listen-socket> > > Resulting in: > Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name > tcp6 0 0 ::1:8000 :::* LISTEN 12043/icecast &...

...add set inet main ossec6 { type ipv6_addr; } add set inet main trusted6 { type ipv6_addr; flags interval; } add set inet main trusted4 { type ipv4_addr; } add element inet main tcp_public { ssh } add element inet main udp_trusted { ntp } # otto delegated_ipv6 add element inet main trusted6 { 2a01:4f8:13b:29a3::/64 } # asus delegated_ipv6 add element inet main trusted6 { 2a02:390:79ef::/48 } # worker delegated_ipv6 add element inet main trusted6 { 2a01:4f8:1c1c:6d6c::/64 } # worker2 delegated_ipv6 add element inet main trusted6 { 2a01:4f8:1c1c:76dd::/64 } # nadia ansible_defa...

...again. This is for incomming and outgoing traffic. I've attached my network xml file. virsh version reports this: Compiled against library: libvirt 1.2.4 Using library: libvirt 1.2.4 Using API: QEMU 1.2.4 Running hypervisor: QEMU 2.0.0 Routing on the guest looks like this: $ ip -6 route 2a01:4f8:200:2265:5054:ff:febe:e8e6 dev eth0 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 default via fe80::5054:ff:fe32:e58 dev eth0 metric 1024 Routing on the host looks like this: $ ip -6 route 2a01:4f8:200:2265::/64 dev eth0 proto kernel metric 256 2a01:4f8:200:2265::...

...: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 >>>> inet 178.79.185.217 netmask 255.255.255.0 broadcast >>>> 178.79.185.255 >>>> inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid 0x20<link> >>>> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid >>>> 0x0<global> >>>> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) >>>> RX packets 9903 bytes 1088621 (1.0 MiB) >>>> RX errors 0 dropped 0 overruns 0 frame 0 &g...

Hi. When I run the backup I always get this error. ``` [root at mail.DOMAIN.com:~]# doveadm -o mail_fsync=never backup -D -R -u office at DOMAIN.com imapc: dsync(office at DOMAIN.com): Info: imapc(imap.mailbox.org:993): Connected to 2001:67c:2050:106::143:199:993 (local 2a01:4f8:c2c:6d05::1:59928) dsync(office at DOMAIN.com): Info: Mailbox deleted: Drafts dsync(office at DOMAIN.com): Error: Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted. ``` The suggested solution from this mail works, but is this still the best solution for the error above?...

...t then on the forwarded-to interface (i.e. after translation) I get bad checksum. The next hop does not see the packet at all. I looked at nf_nat_proto_icmpv6.c for a bit but so far haven't found much. Kernel 4.9.168. e.g. on ingress: IP6 (hlim 61, next-header ICMPv6 (58) payload length: 80) 2a01:4f9:0:c001::a015 > 2a01:???:????:????::1: [icmp6 sum ok] ICMP6, time exceeded in-transit for fra16s12-in-x04.1e100.net on egress: IP6 (hlim 60, next-header ICMPv6 (58) payload length: 80) 2a01:4f9:0:c001::a015 > fd01:???:????:????::2:1: [bad icmp6 cksum 0x735b -> 0x705b!] ICMP6, time exce...

...e) error: failed to synchronize any databases error: failed to init transaction (unable to lock database) error: could not lock database: Permission denied --2014-08-12 16:16:57-- https://aur.archlinux.org/packages/ba/bash/bash.tar.gz Resolving aur.archlinux.org (aur.archlinux.org)... 5.9.250.164, 2a01:4f8:160:3033::2 Connecting to aur.archlinux.org (aur.archlinux.org)|5.9.250.164|:443... connected. HTTP request sent, awaiting response... 404 Not Found 2014-08-12 16:16:58 ERROR 404: Not Found. supermin: set -e umask 0000 cd '/tmp/supermindfc4ec.tmpdir/qjcjfqo9'...

...gt;>> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 >>> inet 178.79.185.217 netmask 255.255.255.0 broadcast >>> 178.79.185.255 >>> inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid 0x20<link> >>> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid >>> 0x0<global> >>> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) >>> RX packets 9903 bytes 1088621 (1.0 MiB) >>> RX errors 0 dropped 0 overruns 0 frame 0 >>>...

Hi guys! Can i use a IPv6 adress at XEN 4.0.1 of Debain 6? In my cfg I use this setting: vif = [ ''ip=85.10.210.154 46.4.44.162 2a01:4f8:130:9301::3'' ] But i get the error message: Error: Device 0 (vif) could not be connected. /etc/xen/scripts/vif-route failed; error detected. Best regards, Stefan _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://l...

...500 >>>>>> inet 178.79.185.217 netmask 255.255.255.0 broadcast >>>>>> 178.79.185.255 >>>>>> inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid >>>>>> 0x20<link> >>>>>> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid >>>>>> 0x0<global> >>>>>> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) >>>>>> RX packets 9903 bytes 1088621 (1.0 MiB) >>>>>> RX errors 0 d...

...t grab the correct IPv6 address. from /sbin/ifconfig -a : eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 178.79.185.217 netmask 255.255.255.0 broadcast 178.79.185.255 inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid 0x20<link> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid 0x0<global> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) RX packets 9903 bytes 1088621 (1.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 7786 bytes 1087223 (1.0 MiB) TX erro...

...MULTICAST> mtu 1500 >>>>> inet 178.79.185.217 netmask 255.255.255.0 broadcast >>>>> 178.79.185.255 >>>>> inet6 fe80::a8ad:d312:4ef4:7272 prefixlen 64 scopeid >>>>> 0x20<link> >>>>> inet6 2a01:7e00::825f:e564:ad53:72fc prefixlen 64 scopeid >>>>> 0x0<global> >>>>> ether f2:3c:91:18:8a:7e txqueuelen 1000 (Ethernet) >>>>> RX packets 9903 bytes 1088621 (1.0 MiB) >>>>> RX errors 0 dropped 0 overru...

...etch > dovecot: imap: Error: Authenticated user not found from userdb, auth lookup id=178651137 (client-pid=13711 client-id=1) > dovecot: imap-login: Internal login failure (pid=13711 id=1) (internal failure, 1 successful auths): user=<box@****.de>, method=PLAIN, rip=2001:****:7765, lip=2a01:****:2, mpid=13717, TLS, session=<bzAOP5QJXwAgAQpgEAXJAZyOMB1qBXdl> That doesn't help me a lot. Here's parts of my configuration, dumped with 'dovecot -n': > # 2.2.9: /etc/dovecot/dovecot.conf > # OS: Linux 3.13.0-40-generic x86_64 Ubuntu 14.04.1 LTS > auth_mechani...