search for: 29160

...all I will admit to being spoiled by my MegaRAID SCSI RAID controllers. When a drive fails on one of them I just replace the drive and carry on with out having to do anything else. I now find myself in the situation where I have a failed drive on a non-MegaRAID controller, specifically an Adaptec 29160 SCSI controller. The system is an Acer G700 with 8 internal hot-swappable SCSI drives arranged in two banks of 4 drives. Each bank is connected to a separate channel on the 29160 controller. When I installed CentOS 4 I enable software mirroring between the two banks so that I ended up with 4 pairs...

...-r-- 0 0.0 1 2006-12-15 21:16:53 ./bar +drwxrwxr-x 0 0.0 2 2006-12-15 21:16:53 ./foo - ------------- check how the files compare with diff: - ------------- - ----- chmod-option log ends - ----- chmod-option rsyncd.log follows 2006/12/15 13:16:53 [29160] connect from localhost.localdomain (127.0.0.1) 2006/12/15 13:16:53 [29160] rsync to test-incoming-chmod/ from localhost.localdomain (127.0.0.1) 2006/12/15 13:16:53 [29160] receiving file list 2006/12/15 13:16:53 [29160] delta-transmission enabled 2006/12/15 13:16:53 [29160] >f+++++++ localhost....

...n issue with CentOS/Fedora RPMs, or the version of MTX? I'm going to try a simple install of Ubuntu next and see if there is any difference. Is this a bug with the firmware, or with my setup? I have rebooted the tape drive and machine several times. I have the drive connected to an Adaptec 29160. I have another identical drive on another system, with a library firmware of d21h, tape firmware 04.04, and that works perfectly with mtx, though it is connected to a different SCSI card. Thanks for any help/insights. Scott

I am running CentOS 4.7, presently on an older box (PIII slot 1 processor @ 500mhz with 384meg of RAM, using SCSI disks with an AHA-2940 host controller). I have built a new box: AMH Semporon 2.<mumble> GHZ, 2gig of RAM. I put in a AHA-29160 host controller (uses same driver as the AHA-2940). The motherboard is an ASROCK thing with nVideo's chipset: nv's SATA controller and nv's integrated network (forcedeth). I just did some tests with live CD and installer CDs for CentOS 4 and 5. It looks like the stock CentOS 4 kernel...

What is the "sg" device? The reason I ask, is that I have a file server running CentOS 4.2 on a Dell Precision 1650. Disks are attached via QLogic FC. I backup to a Qualstar TLS-4222 tape changer, with AIT-2 tapes, which is connected over an Adaptec 29160 Ultra 160 SCSI. The software I'm using is Legato Networker version 7.1.2. I'm backing up a bit under 1 TB a month with this. Quite frequently these days (meaning once a month or two), the Networker software loses the ability to control the tape changer. Mount, unmount commands just...

...nything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue d3e53014, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:11): 80.000MB/s transfers (40.000MHz, offset 32, 16bit) Vendor: EXABYTE Model: VXA-2 Rev: 100E Type: Sequential-Access...

Box with Redhat 7.1 and kernel 2.4.20 has a hardware RAID (about 750 gigs data) attached via an Adaptec 29160 LP card... I began seeing numerous SCSI errors in my logs for our external hardware RAID and input/output errors on test attempts to copy files via cp. Rebooted and immediately saw the errors as the disk was initially accessed by the Adaptec driver. The RAID controller did not report any prob...

...pt problem. I'm redirecting this thread to -stable. > #> >The only suggestion I can offer at the moment is to try various card > #> >placements over your PCI slots. I've found stability using one of the > #> >first two slots for my Adaptec controller (2940U[2]W, 29160[N]) and the > #> >rest for the Intel nics. I got panics on boot with my BP6 (SMP) when I had an ahc controller in a PCI slot that didn't support bus mastering. I suggest you do what the above message says and try different combinations of cards in slots (i.e. keep removing one until...

Hi, I have strange benchmarking results: ext3 with internal log performs 3 times faster then with external log. Linux ES 3.0 (kernel 2.4.21-9.0.1ESsmp), Dell PE 2600, 2 CPU 2.4GHz, 6GB RAM, Adaptec Ultra 160 SCSI 29160 controller External hardware 9-disk RAID 0; 512MB write-back controller cache; U160 Benchmark: SpecSFS v 3.0 Mount options: data=journal,sync, Export options: sync, With ext3 FS on external 9-disk RAID 0 internal log ~ 3000 NFS Ops/sec external log on a second partition on the same...

...P with the second processor installed. It behaves exactly as it did with a single processor and ACPI enabled - i.e. it stops at the 'Waiting for SCSI devices to settle" point and does not get beyond this. I have two SCSI controllers installed - a Compaq 5304 RAID controller and an Adaptec 29160. The system boots from the Adaptec. I do have ATAPICAM compiled in to the kernel, but I get the same result with generic SMP. I have upgraded the machine to 6.1-PRERELEASE and I still get the same problem. Does anybody have any ideas about setting about debugging this ? The motherboard has been fl...

Did somebody can give me some advises on hardware for building a Centos linux server? --- Michel Donais -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110213/3c928cc9/attachment.html>

...powered Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 pcm0: <AudioPCI ES1373-8> port 0xd400-0xd43f irq 2 at device 9.0 on pci0 pcm0: <Cirrus Logic CS4297A ac97 codec> ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xe4102000-0xe4102fff irq 16 at device 10.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xdc00-0xdc3f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 17 at d...

> My current zfs setup lookst like this: > > homepool 3.63G 34.1G 8K /homepool > > homepool/db 61.6M 34.1G 8.50K /var/db > > homepool/db/pgsql 61.5M 34.1G 61.5M > > /var/db/pgsql > > homepool/home 3.57G 34.1G 10.0K /users > > homepool/home/carrie 8K 34.1G 8K > > /users/carrie > >

I've installed and playing Dungeon keeper nicely with wine-1.3.24 on Fedora 15 at 1024x768 but it crash with (modified from registry) 1280x1024 resolution before in game (just after loading). Does someone have find a workaround (google give me nothing....) Here is the debug : Code: wine DKII.exe -softwarefilter -32biteverything -enablebumpmapping -enablebumpluminance

...lt;Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0x90000000-0x90000fff irq 21 at device 0.0 on pci4 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0x1100-0x113f mem 0x90001000-0x90001fff irq 20 at device 8.0 on p...

...erlink XL> port 0xe480-0xe4ff mem 0xfebfef00-0xfebf ef7f irq 11 at device 16.0 on pci0 xl1: Ethernet address: 00:01:02:be:6d:41 miibus1: <MII bus> on xl1 xlphy1: <3Com internal media interface> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0x febfffff irq 10 at device 18.0 on pci0 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0...

Dear best guys, I really love 5.3 in many ways but here're some unbelievable transfer rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve my performance problem (*laugh*): (In short, see *** below) Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI Desktop adapter MT) connected directly without a switch/hub and "device

...#39;m going to try a simple install of Ubuntu next and see if there is any >> difference. >> >> Is this a bug with the firmware, or with my setup? >> >> I have rebooted the tape drive and machine several times. >> >> I have the drive connected to an Adaptec 29160. >> >> I have another identical drive on another system, with a library firmware >> of d21h, tape firmware 04.04, and that works perfectly with mtx, though it >> is connected to a different SCSI card. >> >> Thanks for any help/insights. >> >> Scott &g...