search for: 2900

...0000 9(2890) DEBUG:destroy_avp_list: destroing list (nil) 9(2890) receive_msg: cleaning up 27(2908) tcp_main_loop: read response= f51740e0, 2 from 9 (2890) 27(2908) tcpconn_add: hashes: 772, 1 27(2908) tcp_main_loop: data available on 0xf51740e0 [h:772] 41 27(2908) send2child: to tcp child 0 19(2900), 0xf51740e0 19(2900) received n=4 con=0xf51740e0, fd=26 19(2900) tcp_read_req: content-length= 0 19(2900) SIP Reply (status): 19(2900) version: <SIP/2.0> 19(2900) status: <100> 19(2900) reason: <Trying> 19(2900) parse_headers: flags=1 19(2900) Found param type 232, <bran...

I'm try to bond a few interfaces together with the hopes of getting increased throughput, and I'm using a cisco Catalyst 2900 as the switch. I've tried using mode 0, 5, and 6 with nothing special on the switch, and mode 4 with some ports "trunked" together (I have a feeling that the "trunking" that the 2900 does is not 802.3ad, as it disabled the ports it saw as redundant), yet xfer speeds always c...

...ang.nyu@gmail.com> wrote: > Hi, > > > > I have a new question about subsetting in R. > > > > Say we have this data frame: > > > > PT_ID Blood_Pressure OBS_TYPE > > 92 1900 90.0 DBP > > 94 1900 90.0 DBP > > 174 2900 140.0 SBP > > 176 2900 130.0 SBP > > 180 3900 120.0 SBP > > 268 3900 150.0 SBP > > 268 3900 90.0 DBP > > > > I need to obtain those with 2+ DBP>=90 or 2+ SBP>=140. > > > > PT_ID=1900, he has 2 DB...

From: Hans Verkuil <hans.verkuil at cisco.com> A big problem with DP CEC-Tunneling-over-AUX is that it is tricky to find adapters with a chipset that supports this AND where the manufacturer actually connected the HDMI CEC line to the chipset. Add a mention of the MegaChips 2900 chipset which seems to support this feature well. Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com> --- drivers/gpu/drm/drm_dp_cec.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_dp_cec.c b/drivers/gpu/drm/drm_dp_cec.c index 1407b13a8d5d..8...

From: Hans Verkuil <hans.verkuil at cisco.com> A big problem with DP CEC-Tunneling-over-AUX is that it is tricky to find adapters with a chipset that supports this AND where the manufacturer actually connected the HDMI CEC line to the chipset. Add a mention of the MegaChips 2900 chipset which seems to support this feature well. Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com> Reviewed-by: Lyude Paul <lyude at redhat.com> Acked-by: Alex Deucher <alexander.deucher at amd.com> --- drivers/gpu/drm/drm_dp_cec.c | 4 +++- 1 file changed, 3 insertions(+...

CentOS Errata and Bugfix Advisory 2018:2900 Upstream details at : https://access.redhat.com/errata/RHBA-2018:2900 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fc071dead7d21c49e470b3d34d5d9d537a0a80d020a0114d0a26d46a2e7b214a dhclient-4.1.1-63.P1.el6.centos.i686.rp...

...solr and fts_tika - jetti8 (from Debian Jessie) and latest tika-server running on a seperate machine. But if I want to rescan all messages for reindexing for instance all attachments with "doveadm -v index -u user at domain.tld INBOX" with 3137 mail in the INBOX it counts and then by 2900 mails the doveadm crashes with the following error message: doveadm(user at domain.tld): Info: INBOX: Caching mails seq=1..3137 2900/3137doveadm(user at domain.tld): Error: fts_solr: Indexing failed: 500 Java heap space java.lang.OutOfMemoryError: Java heap space doveadm(user at domain.tld): Pa...

Hi, This is the env. Dell Poweredge 2900 Redhat ES 4 ( 64 bit ) I installed the rpm''s # rpm -ivh xen-3.0.3.0-1.*.rpm # rpm -ivh kernel-xen-2.6.16.29-3.0.3.0.*.rpm And changed grub. But when I reboot, It hangs on "scrubbing free RAM". What are my option to fix this and get xen working? Joeri _____________________...

Hi boys! My xen 3.3.1 dom0 crashes unexpectedly , I''ve a dell powered 2900 III with a PERC 5/9i RAID controller. It works for a few days , then it goes into black and the raid controller leds are fixed at green (no blinking at all). I''m using the following drivers: Device Drivers ---> SCSI device support --->...

I have a brand new poweredge 2900 with 10 SAS drives configured in two arrays via the built-in PERC 5 raid controller as: raid 1: 2x73GB raid 10: 8x300GB It's got 4GB of ram, and it's intended to be an NFS filestore. For some strange reason, logging in with ssh works great, it returns a prompt, all seems well. I go t...

I'm in conversation with Draytek's pre-sales dept.............. Here's the most recent reply: <Hello, We really don't know of anyone who has run an Asterisk server on a Vigor2900. There are doubtless people around, but it's relatively rare. Most people don't run SIP servers. Regards,> All I want to know is, if I buy one of these routers, will it break my setup or not - ie. assuming I set up the relevant port-forwarding, can I expect any one-way audio issues. Ca...

The only PCI-X card I have is an old ICP Vortex RAID controller and the Dell hangs with that installed (BIOS is disabled). It's only for a tape drive so performance isn't really an issue. thanks

Hi All, I install CentOS 4.4 without additional driver disk. When I partition the disk, I create nothing on the raid 5, and I just create " / " " /boot " and "swap" on the raid 1. And it works. When I create a mount point /storage on the raid 5 and create " / " " /boot " and "swap" on the raid 1. The error comes again, saying that

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, someone are using Dell 2900 and PERC5 controller with Xen? I want to test this server with 24GB RAM, 7 discs 15000 RPM SCSI and 2 processors. If someone could tell me if this hardware works great with Xen, will be nice. Thanks. Lucas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with...

We're trying some migration tests ... from CommuniGate to Dovecot. The migration program does an APPEND into the new mailbox: src>: a0 FETCH 2900 (FLAGS INTERNALDATE RFC822.PEEK) src<: * 2900 FETCH (FLAGS (\Seen) INTERNALDATE "29-Aug-2005 18:36:54 +0000" RFC822 {1194157} src<: ) dst>: bAPP APPEND "INBOX" (\Seen) "29-Aug-2005 18:36:54 +0000" {1194157} dst<: + OK It appears to be trying to set the mes...

...lab("Student ID") The number of unique id.bb is 2207 and so my X-axis has a couple of thousands, indistinguishable tick marks that correspond to each id. I am wondering if there is a way to suppress these tick marks? Here is some test data: > test id.bb bb.res.m bb.math.comb BB 1 2900 1 -3.0032235 BB 2 2904 1 -1.8758770 BB 3 3469 1 0.8182852 BB 4 4213 1 -2.0660215 Not BB 5 4215 1 -4.8622086 BB 6 4395 1 0.8873996 Not BB > ggplot(data=test,aes(x=factor(id.bb),y=bb.math.comb,fill=BB)) + geom_bar() + facet_grid(BB~.) +...

...it/openssh-portable/regress/data keys-command (nothing really apparent that I can find in the logs) AuthorizedKeysCommand with arguments connect failed AuthorizedKeysCommand without arguments connect failed integrity (a sample... pretty much all of the tests do this) test integrity: hmac-sha1 @2900 unexpected error mac hmac-sha1 at 2900: Bytes per second: sent 40854.2, received 34836.9. principals-command (a sample. Every 3 to 5 executions fail. Nothing apparent the logs as to why. Could this be a timing issue on recycling ports?). authorized principals command: privsep yes empty authorized...

...e 265 You receive the fileinfo and also the used port (y) for the transfer in line 273 Than you perform a core_udp_disconnect at line 286 Now you perform a new core_udp_connect to port y which set the source port to x + 1 at line 287 for example: Client | Server TFTP get file 2900 > 69 Response tsize 2900 < 7012 ACK blk 0 2901 > 7012 <-- wrong source port Now the TFTP is failing, because he expect the filetransfer client port as the same as the initial filerequest. Maybe that help to solve the problem Regards Michael

...first time I ever looked at amdgpu code. Two notes on CEC-Tunneling-over-AUX: 1) You need to be very careful about which USB-C/DP/mini-DP to HDMI adapters you buy. Only a few support this feature correctly today. Known chipsets that support this are Parade PS175 & PS176 and MegaChips 2900. Unfortunately almost all Parade-based adapters do not hook up the HDMI CEC pin to the chip, making them useless for this. The Parade reference design was only recently changed to hook up this pin, so perhaps this situation will change for new Parade-based adapters. Adapters based o...

...inux server: #for i in {001..5000}; do mkdir $i; done; All catalogs are showing in Windows OS. All catalogs are showing in Linux OS. The test scenario #2: Creating 10000 folders inside Linux server: #for i in {001..10000}; do mkdir $i; done; Instead of showing all folders Windows OS shows only 2900 from 10000 list: 00002, 00004, 00008, 00011 ... Linux OS shows 6040 folders from 10000 list: 00001, 00002, 00004, 00005, 00006, 00008, 00011, 00012 ... Any idea why its happening ?