search for: 27ff

Hello List, I am trying to compile and install Samba 4 using the wiki guide on Centos 6.2. I am currently using the current source from git. It seems that the zone file used for Bind is not configured and not installed in the private directory. Is there any way to get this file generated so I can finish my install? Thank you for your time and have a great day!! Kind regards, Jeremy

> First off, I assume you can ping your link-local address: > > ping6 -I eth1 fe80::a00:27ff:fe03:5b8a > > Second, you never mentioned how eth1 was assigned its IPv6 address. > Given that you've tried to embed an IPv4 address within an IPv6 address > (which is normally done with a 0:0:0:0:0: prefix), I'd guess you did it > manually. If so, with what tools? Than...

> Try > > ping6 -I eth1 2000:8000:12:6:192:168:11:8 Thanks for the response. I tried. However, It did not resolve.... # ping6 -I eth1 2000:8000:12:6:192:168:11:8 PING 2000:8000:12:6:192:168:11:8(2000:8000:12:6:192:168:11:8) from fe80::a00:27ff:fe03:5b8a eth1: 56 data bytes On 2015/11/13 2:22, Paul Heinlein wrote: > On Thu, 12 Nov 2015, ???? wrote: > >> Hello >> >> Because I did not send , and then retransmitted. >> >> I am using the CentOS5.7. >> In a state where the link down, I did a ping to t...

> >> Who are you logged into the Windows PC as ? > > I log in az A\Administrator. I created an admin user, put in Domain > > Admins group, but the result was the same (ok, it would be strange, if > > it would work with it, instead of Administrator) > Then you need to ensure that 'Domain Admins' has the same privilege as > 'A\Administrator' Ok, I

...9258 timer expiration on tun0, state = 1 send RS on tun0, whose state is 2 set timer for tun0 to 4:0 New timer is 4:00000671 received RA from fe80::2d0:baff:fef4:e80 on tun0, state is 2 stop timer for tun0 there is no timer axxem.hide:~# tethereal -i tun0 ip6 Capturing on tun0 0.000000 fe80::290:27ff:fe78:9275 -> ff02::2 ICMPv6 Router solicitation 0.050048 fe80::2d0:baff:fef4:e80 -> ff02::1 ICMPv6 Router advertisement Detailed advertisement ("auto" flag is ON): Internet Control Message Protocol v6 Type: 134 (Router advertisement) Code: 0 Checksum: 0x7...

...qdisc > pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff > > inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 > > valid_lft 83319sec preferred_lft 83319sec > > inet6 fe80::a00:27ff:fec9:960/64 scope link > > 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff > > inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 &...

...ry >> >> ping6 -I eth1 2000:8000:12:6:192:168:11:8 > > Thanks for the response. > > I tried. > However, It did not resolve.... > > # ping6 -I eth1 2000:8000:12:6:192:168:11:8 > PING 2000:8000:12:6:192:168:11:8(2000:8000:12:6:192:168:11:8) from > fe80::a00:27ff:fe03:5b8a eth1: 56 data bytes First off, I assume you can ping your link-local address: ping6 -I eth1 fe80::a00:27ff:fe03:5b8a Second, you never mentioned how eth1 was assigned its IPv6 address. Given that you've tried to embed an IPv4 address within an IPv6 address (which is normally d...

...2: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 valid_lft 83319sec preferred_lft 83319sec inet6 fe80::a00:27ff:fec9:960/64 scope link 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 inet6 fe80::a00:27ff:fe60:dfa1/64 scope link...

...u 1500 qdisc pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff > > inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 > > valid_lft 83319sec preferred_lft 83319sec > > inet6 fe80::a00:27ff:fec9:960/64 scope link > > 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff > > inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 > &g...

...168.250.8 netmask ffffff00 broadcast 192.168.250.255 ether 8:0:27:bd:35:de lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 e1000g0: flags=20002004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 3 inet6 fe80::a00:27ff:febd:35de/10 ether 8:0:27:bd:35:de

CentOS-6.10 We have a host with the following ifcfg file contents: BOOTPROTO=none BROADCAST="" DEFROUTE=yes DEVICE=eth1 . . . GATEWAY=X.Y.Z.234 IPADDR=A.B.C.2 IPV4_FAILURE_FATAL=yes NAME="LAN Link - eth1" NETMASK="255.255.255.128" NETWORK="A.B.C.0" NM_CONTROLLED=no ONBOOT=yes PREFIX=25 TYPE=Ethernet USERCTL=no And an aliased ifcfg containing this:

...inet6 fe80::2d0:b7ff:fe0a:3f66/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:90:27:90:68:0d brd ff:ff:ff:ff:ff:ff inet 10.0.1.1/24 brd 10.0.1.255 scope global eth1 inet6 fe80::290:27ff:fe90:680d/64 scope link valid_lft forever preferred_lft forever 4: sit0: <NOARP> mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 [root@xstone ~]# ip route show 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.3 10.0.1.0/24 dev eth1 proto kernel scope link src 10.0.1.1...

Hi, I have a Samba4 domain controller installed on Debian Wheezy (Domain = CHEZMOI.PRIV). I try to installed an another Samba4 server which is just a member of the CHEZMOI.PRIV domain. But I don't succeed. I have followed this page : https://wiki.samba.org/index.php/Samba4/Domain_Member But I have : ~# net ads join -U administrator Enter administrator's password: kinit succeeded but

...th2 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 08:00:27:b0:c5:7c brd ff:ff:ff:ff:ff:ff inet 192.168.200.1/24 brd 192.168.200.255 scope global eth2 inet 192.168.201.1/26 brd 192.168.201.63 scope global eth2 inet6 fe80::a00:27ff:feb0:c57c/64 scope link valid_lft forever preferred_lft forever Best regards Ulf

Hello Dear Friends, it is CentOS Release 6.2, ntpd is running but do not see bounded to the port udp:123 any guidelines would be very much appreciable. [root at jet mavi]# netstat -ntlp | grep ntpd <nothing in output> [root at jet mavi]# netstat -ntl | grep 123 <nothing in output> But the service is running - [root at jet mavi]# /etc/init.d/ntpd status ntpd (pid 15876) is

...inc.conf: Name = client1 ConnectTo = server1 Device = /dev/net/tun tinc-up: ifconfig $INTERFACE 192.168.1.2 netmask 255.255.0.0 ifconfig: eth0 Link encap:Ethernet HWaddr 08:00:27:D9:9E:5F inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fed9:9e5f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11199 errors:0 dropped:0 overruns:0 frame:0 TX packets:7632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12593716 (12.0 MiB) TX b...

...CAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 ??? link/ether 08:00:27:8d:c0:4d brd ff:ff:ff:ff:ff:ff ??? altname enp0s3 ??? inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic eth0 ?????? valid_lft 78916sec preferred_lft 78916sec ??? inet6 fe80::a00:27ff:fe8d:c04d/64 scope link ?????? valid_lft forever preferred_lft forever No problem to retrieve the A record: $ host -t A dc1.samdom.vm-myserver dc1.samdom.vm-myserver has address 192.168.56.10 But no AAAA record: $ host -t AAAA dc1.samdom.vm-myserver dc1.samdom.vm-myserver has no AAAA record I...

...ree hypothesis testing procedure is hardly resonable aside) I tried the following call (worked out with help of the following internet resources http://www.psych.northwestern.edu/Misc/s+.html example 5 ?Notes on the use of R for psychology experiments and questionnaires? by Jonathan Baron pp. 27ff) summary(aov(mean~cond*roi*group+Error(subj/(cond*roi))+group,data=roiData)) if I got it right so far, then the Error(subj/...) expression take the repeated measurement into accout and the +group at the and tells R that group is a between factor not nested in subj this was the R output Error: su...

Hello Because I did not send , and then retransmitted. I am using the CentOS5.7. In a state where the link down, I did a ping to the IPv4 and IPv6. IPv4 succeeds in ping. but, IPv6 is ping fails. Once confirmed by ifconfig, it did not have a Link-Local Address. At link down, Is the Link-Local Address not set? Leave the link down, Is there a way to avoid this? # ethtool eth1 Settings for eth1: ?

...ameters rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" Processing section "[users]" adding IPC service added interface eth0 ip=fe80::a00:27ff:fe7c:2d50%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff:: added interface eth0 ip=192.168.1.110 bcast=192.168.1.255 netmask=255.255.255.0 loaded services Initialise the svcctl registry keys if needed. Closed policy Closed policy Closed policy Closed policy Closed policy Clos...