search for: 2600k

I would like to gain some idea of the XCP impact of these two CPU versions: Intel Core i7-2600, 3.4 GHz Core i7-2600K, 3.5 GHz Both have VT-x Differences 2600K does not include: Embedded Opions Available vPro Technology Virtualization Technology for Directed I/O Trusted Execution Technology Is the difference critical? Thanks, ray

Dear List, We have lots of issues running Glusterfs over Infiniband. The client can mount the share, but when trying to access it by ls, df, touch du or any other kind the client hosts freeze the accessing shell and reboot is hardly possible. OS: CentOS 6.0 64 bit on i7 2600k machines Version: GlusterFS 3.2.2, also found in lower 3.2.1 Kernel Version 2.6.32 IB Stack and kernel moduls taken and built from OFED /Open Fabrics (1.5.3) /IP over IB works, I can ping ober Ib between the maschines, Gluster System complains though about RDMA errors... IB Cards used: Mellan...

...ions about configure options. > > As I am not sure if mine is correct, I would appreciate some advices and hints. > > > > OS: Fedora 22 > > parallel_studio_xe_2016 > > Hardware : 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: > > Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz - Sandybridge > > R-3.2.2 > > > > Here is my build configuration: > > > > ------------------------------------------------------- > > source /opt/intel/compilers_and_libraries_2016/linux/mkl/bin/mklvars.sh intel64 > > source /opt/intel/bin/com...

...incomplete, sometime fantasist et do not give much explanations about configure options. As I am not sure if mine is correct, I would appreciate some advices and hints. OS: Fedora 22 parallel_studio_xe_2016 Hardware : 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz - Sandybridge R-3.2.2 Here is my build configuration: ------------------------------------------------------- source /opt/intel/compilers_and_libraries_2016/linux/mkl/bin/mklvars.sh intel64 source /opt/intel/bin/compilervars.sh intel64 _mkllibpath=$MKLROOT/lib/intel64 _icclibpath=$M...

...e? > I don't believe so. I use Workstation 10.0.2 on Ubuntu 12.04 for the > moment. <stupid question> and have EFI enabled? </stupid> > I hope this is a hex-core host with 6+GiB of RAM. Fedora runs on an AMD A8-6600K at 3Ghz and has 8G of RAM. Ubuntu runs on an Intel i7-2600K at 3.4Ghz with 16G RAM. I think they perform at least "good enough" to quikly boot and install in BIOS mode. The trouble only starts when I toggle the EFI switch. > Have you considered single vCPU client VMs? Yes. That's what I started with. But then I saw this piece of code in...

...u4) 4.7.3 I get the second set; afaict the other locks don't seem to have this problem, but I only just noticed. --- I measure the cycles spend in arch_spin_lock() + arch_spin_unlock(). The machines used are a 4 node (2 socket) AMD Interlagos, a 2 node (2 socket) Intel Westmere-EP and my i7-2600K (SNB) desktop. (ticket) (qspinlock + all) (waiman) AMD Interlagos Local: 1: 324.425530 1: 324.102142 1: 323.857834 2: 17141.324050 2: 620.185930 2: 618.737681 3: 52212.232343 3: 25242.574661 3: 24888.154161 4: 93136.458314...

...do not give > much explanations about configure options. > As I am not sure if mine is correct, I would appreciate some advices and hints. > > OS: Fedora 22 > parallel_studio_xe_2016 > Hardware : 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: > Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz - Sandybridge > R-3.2.2 > > Here is my build configuration: > > ------------------------------------------------------- > source /opt/intel/compilers_and_libraries_2016/linux/mkl/bin/mklvars.sh intel64 > source /opt/intel/bin/compilervars.sh intel64 > _mkllibpa...

...use Workstation 10.0.2 on Ubuntu 12.04 for the >> moment. > > <stupid question> and have EFI enabled? </stupid> > >> I hope this is a hex-core host with 6+GiB of RAM. > > Fedora runs on an AMD A8-6600K at 3Ghz and has 8G of RAM. Ubuntu runs > on an Intel i7-2600K at 3.4Ghz with 16G RAM. I think they perform at > least "good enough" to quikly boot and install in BIOS mode. The > trouble only starts when I toggle the EFI switch. > > >> Have you considered single vCPU client VMs? > > Yes. That's what I started with. But th...

I want to build R optimized, with either MKL, OpenBLAS or ATLAS. My OS: Fedora 22 Hardware: CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz I am a little confused when it comes to choose a method and would like to hear your experiences. If I am right, I have 3 possibilities: - OpenBLAS: opensource and free, but I came across some posts describing seg faults issues and bugs. These posts are 2 years old and I wonder if it...

...ions. >> > As I am not sure if mine is correct, I would appreciate some advices and hints. >> > >> > OS: Fedora 22 >> > parallel_studio_xe_2016 >> > Hardware : 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: >> > Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz - Sandybridge >> > R-3.2.2 >> > >> > Here is my build configuration: >> > >> > ------------------------------------------------------- >> > source /opt/intel/compilers_and_libraries_2016/linux/mkl/bin/mklvars.sh intel64 >> &g...

...am not sure if mine is correct, I would appreciate some advices and hints. > >> > > >> > OS: Fedora 22 > >> > parallel_studio_xe_2016 > >> > Hardware : 8 Thread(s) per core: 2 Vendor ID: GenuineIntel Model name: > >> > Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz - Sandybridge > >> > R-3.2.2 > >> > > >> > Here is my build configuration: > >> > > >> > ------------------------------------------------------- > >> > source /opt/intel/compilers_and_libraries_2016/linux/mkl/bin/...

On Fri, October 28, 2016 11:50 am, Alessandro Baggi wrote: > Il 28/10/2016 16:28, Valeri Galtsev ha scritto: >> >> On Fri, October 28, 2016 2:42 am, Alessandro Baggi wrote: >>> Il 27/10/2016 19:38, Yamaban ha scritto: >>>> For my personal use I would replace that Drive asap. >>>> - There is no warranty for it anymore (time since buy) >>>>

Hi, Here are some numbers for my version -- also attached is the test code. I found that booting big machines is tediously slow so I lifted the whole lot to userspace. I measure the cycles spend in arch_spin_lock() + arch_spin_unlock(). The machines used are a 4 node (2 socket) AMD Interlagos, and a 2 node (2 socket) Intel Westmere-EP. AMD (ticket) AMD (qspinlock + pending + opt) Local:

Hi, Here are some numbers for my version -- also attached is the test code. I found that booting big machines is tediously slow so I lifted the whole lot to userspace. I measure the cycles spend in arch_spin_lock() + arch_spin_unlock(). The machines used are a 4 node (2 socket) AMD Interlagos, and a 2 node (2 socket) Intel Westmere-EP. AMD (ticket) AMD (qspinlock + pending + opt) Local:

Hi Duncan, On Mon, Mar 9, 2015 at 10:40 AM, Duncan Murdoch <murdoch.duncan at gmail.com> wrote: > On 09/03/2015 11:07 AM, Hsiu-Khuern Tang wrote: >> >> On Mon, Mar 9, 2015 at 3:50 AM, Duncan Murdoch <murdoch.duncan at gmail.com> >> wrote: >> > On 08/03/2015 10:02 PM, Hsiu-Khuern Tang wrote: >> >> Hi, >> >> >> >> [This

Dear people on the Syslinux Mailinglist, Are there any known problems with the performance of TFTP in (U)EFI environments in general or maybe just on VMWare? Right now I'm running tests on two virtual environments using either VMWare Workstation 11.1.0 on a Fedora 21 system or VMWare Player 7.1.0 on an Ubuntu 14.10 system. Both virtual systems support PXE booting in UEFI mode. Both systems