search for: 25e

Hi all, I have a Develop ineo 25e printer, and want to set it up with CUPS. I connect to http://localhost:631/ and add the printer, with uploading the PPD available here: http://www.develop.eu/en/products/office-products/colour/ineo-25/downloads.html (English, Linux, version 1.1 dated 2012) The printer is network connected, and t...

Are any of you using the Intel 320 as ZIL? It''s MLC based, but I understand its wear and performance characteristics can be bumped up significantly by increasing the overprovisioning to 20% (dropping usable capacity to 80%). Anyone have experience with this? Ray

We are looking into the possibility of adding a dedicated ZIL and/or L2ARC devices to our pool. We are looking into getting 4 ? 32GB Intel X25-E SSD drives. Would this be a good solution to slow write speeds? We are currently sharing out different slices of the pool to windows servers using comstar and fibrechannel. We are currently getting around 300MB/sec performance with 70-100% disk busy.

I know that this has been well-discussed already, but it''s been a few months - WD caviars with mpt/mpt_sas generating lots of retryable read errors, spitting out lots of beloved " Log info 31080000 received for target" messages, and just generally not working right. (SM 836EL1 and 836TQ chassis - though I have several variations on theme depending on date of purchase: 836EL2s,

...re, the two SSD''s used as ZIL/OS) - The other LSI port goes to the rear backplane where the two L2ARC drives are along with a couple SATA''s) We''ve got 6GB''s of RAM and 2 quad core Xeons in the box as well. The SSD''s themselves are all Intel X-25E''s (32GB) with firmware 8860 and the LSI 1068 is a SAS1068E B3 with firmware 011c0200 (1.28.02.00). We''re running Solaris 10U8 mostly up to date and MPT HBA Driver v1.92. Thoughts, theories and conjectures would be much appreciated... Sun these days wants us to be able to reprodu...

Hi I''m running OpenSolaris 148 on a few boxes, and newer boxes are getting installed as we speak. What would you suggest for a good SLOG device? It seems some new PCI-E-based ones are hitting the market, but will those require special drivers? Cost is obviously alsoo an issue here.... Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net

Hi, ? I just recieved the message that Debian Jessie is about to be release on 25e April 2015 And this is not an april's 1 fools day joke.. ? Greetz, ? Louis ?

Trying to track down why our two Intel X-25E''s are spewing out Write/Retryable errors when being used as a ZIL (mirrored). The system is running a LSI1068E controller with LSISASx36 expander (box built by Silicon Mechanics). The drives are fairly new, and it seems odd that both of the pair would start showing errors at the same tim...

Hi all; We have a Solaris 10 U9 x86 instance running on Silicon Mechanics / SuperMicro hardware. Occasionally under high load (ZFS scrub for example), the box becomes non-responsive (it continues to respond to ping but nothing else works -- not even the local console). Our only solution is to hard reset after which everything comes up normally. Logs are showing the following: Jan 8

...{ - gboolean found = FALSE, gotdot = FALSE; - guint digits = 15; - char tmp[50], *end, *start, *s; - tmp[0] = ' '; - s = &tmp[1]; - if (ABS (d) > 0.00001 && ABS (d) < 1e+15) { - g_ascii_formatd (s, 50, "%.22f", d); - } else { - g_ascii_formatd (s, 50, "%.25e", d); - } - start = s; - /* skip - sign */ - if (*start == '-') - start++; - /* count digits (maximum allowed is 15) */ - while (digits) { - if (*start == '.') { - start++; - gotdot = TRUE; - continue; - } - if (*start < '0' || *start > '9&...

I''m looking to move our file storage from Windows to Opensolaris/zfs. The windows box will be connected through 10g for iscsi to the storage. The windows box will continue to serve the windows clients and will be hosting approximately 4TB of data. The physical box is a sunfire x4240, single AMD 2435 processor, 16G ram, LSI 3801E HBA, ixgbe 10g card. I''m looking for suggestions

I have a Solaris 10 U8 box (142901-14) running as an NFS server with a 23 disk zpool behind it (three RAIDZ2 vdevs). We have a single Intel X-25E SSD operating as an slog ZIL device attached to a SATA port on this machine''s motherboard. The rest of the drives are in a hot-swap enclosure. Infrequently (maybe once every 4-6 weeks), the zpool on the box stops responding and although we can still SSH in and manage the server, there ap...

Recently, I''ve been reading through the ZIL/slog discussion and have the impression that a lot of folks here are (like me) interested in getting a viable solution for a cheap, fast and reliable ZIL device. I think I can provide such a solution for about $200, but it involves a lot of development work. The basic idea: the main problem when using a HDD as a ZIL device are the cache flushes

I have a 24 x 1TB system being used as an NFS file server. Seagate SAS disks connected via an LSI 9211-8i SAS controller, disk layout 2 x 11 disk RAIDZ2 + 2 spares. I am using 2 x DDR Drive X1s as the ZIL. When we write anything to it, the writes are always very bursty like this: ool 488K 20.0T 0 0 0 0 xpool 488K 20.0T 0 0 0 0 xpool

Running a zpool scrub on our production pool is showing a scrub rate of about 400K/s. (When this pool was first set up we saw rates in the MB/s range during a scrub). Both zpool iostat and an iostat -Xn show lots of idle disk times, no above average service times, no abnormally high busy percentages. Load on the box is .59. 8 x 3GHz, 32GB ram, 96 spindles arranged into raidz zdevs on OI 147.