search for: 1920kbit

Hello, I have HTB on IMQ device. My rate does not work as I configured. I configured 1920kbit/s and I can download only about 290kbit/s (while it should be the whole bandwidth). My script: /sbin/modprobe imq numdevs=1 /usr/local/sbin/tc qdisc del dev imq0 root 2> /dev/null > /dev/null /usr/local/sbin/tc qdisc del dev imq0 ingress 2> /dev/null > /dev/null /sbin/ifconfig imq0 dow...

...p Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc pfifo 60: limit 2p Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc htb 1: r2q 10 default 10 direct_packets_stat 0 ver 3.7 Sent 896 bytes 10 pkts (dropped 0, overlimits 0) Class statistics: ------------------- class htb 1:1 root rate 1920Kbit ceil 1920Kbit burst 4056b/8 mpu 0b cburst 4056b/8 mpu 0b level 7 Sent 1988 bytes 16 pkts (dropped 0, overlimits 0) rate 23bps lended: 0 borrowed: 0 giants: 0 tokens: 12963 ctokens: 12963 class htb 1:10 parent 1:1 leaf 10: prio 1 quantum 9011 rate 704Kbit ceil 1920Kbit burst 2500b/8 mpu 0b cbur...

I''m just-so-fresh to the list, so hello everyone. I''m having a realy hard time with setting up very simple bandwidth management. What I am trying to do is setup a 10Mbit interface to send at only 1920kbit to most of the network (to make sure it hardly ever tops 2mbit). I did succeed with the ingress traffic... With egress however, I get very odd results at different speeds. With HTB: If i try to throttle at 0.5mbit for example, a windows box on 1mbit ADSL line is capable of downloading at ~64k from...

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source