search for: 15v

...ans Utility Power is normal. Low means 'Power Failure'. III. Shutdown UPS: Pin(4): High 10-15 sec to 'Shutdown' UPS. Pin 1 and 8 are open collectors; the pull high pin is 7. When using the contact closure port, pull pin 7 high. Pin 7 can support standard RS232 voltage up to 15V. If the high voltage comes from pin 7, and pin 7 is 5V, the high level is 5V; if pin 7 is 15V, the high voltage is 15V. When using Shutdown function (Pin 4), the level should be 15V(RS232 level) Thanks Jesper

...95% - Air Pressure: 86Kpa to 106Kpa - Environmental Noise: =60dB(A) - Working Frequency: Automatically switch between GSM 900MHz and GSM 1800MHz - Frequency Stability: Better Then 2.5 PPM - Signal Sensitivity: -103 dBM - Transmit Power: < 2W - Power Supply: AC 220V ? 15V -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060427/d6a57728/attachment.htm

...I've changed the 4th/final coefficient to +5.0, but haven't tested extensively (with fluctuating voltages). The input/output voltage appears to be swapped _most of the time_. When doing a battery test, or when unplugged, the input stays steady, and the _output_ voltage reports a drop to ~15V. OTOH, when the UPS is shutdown, the ordering appears correct, as the input stays steady, and the output shows ~5V. For the above, the Powercom upsmon software appears to special-case those ~5/15V results, and on the next update, report it as 0V. I have no idea how to even special-case the screw...

...ant as battery voltage, output voltage and output current are OK. Mini-box support and documentation are very poor too - but you can?t help with that! I hope you can comment on the attached debug output which you requested. I?ve provided two - one on battery and the other on input power (which is 15v for my OpenUPS). (I have higher debug level options available but you asked for -DDD) The command I used to start the driver was /usr/sbin/usbhid-ups -DDD -a openups Finally, I?d be interested in the additional debug modes for usbhid-ups. This isn?t a ?production system? currently; it?s my home a...

Since about v0.9 I've been unable to get wine to reliably receive characters on the serial port. Sending is fine. The latest version I've tried is 1.1.23, and this always loses the first two characters of a line, then randomly loses some of the later ones. Is anyone else seeing the problem? It's an absolute show-stopper for me because the only Windows software I use needs serial coms

...ge, output voltage and output current are OK. > > Mini-box support and documentation are very poor too - but you can?t help with that! > > I hope you can comment on the attached debug output which you requested. I?ve provided two - one on battery and the other on input power (which is 15v for my OpenUPS). (I have higher debug level options available but you asked for -DDD) > > The command I used to start the driver was /usr/sbin/usbhid-ups -DDD -a openups > > Finally, I?d be interested in the additional debug modes for usbhid-ups. This isn?t a ?production system? curre...

...ge and output current are OK. >> >> Mini-box support and documentation are very poor too - but you can?t help with that! >> >> I hope you can comment on the attached debug output which you requested. I?ve provided two - one on battery and the other on input power (which is 15v for my OpenUPS). (I have higher debug level options available but you asked for -DDD) >> >> The command I used to start the driver was /usr/sbin/usbhid-ups -DDD -a openups >> >> Finally, I?d be interested in the additional debug modes for usbhid-ups. This isn?t a ?producti...

On Mar 13, 2015, at 10:14 AM, Rob Groner <rgroner at RTD.com> wrote: >> >> The documentation isn't explicit about this, but 'upsdrvctl shutdown' is >> meant to be run after all of the other processes on the system have been >> killed, real filesystems have been unmounted, and the kernel shutdown >> syscall is about to be called. Usually the init

> > The documentation isn't explicit about this, but 'upsdrvctl shutdown' is > meant to be run after all of the other processes on the system have been > killed, real filesystems have been unmounted, and the kernel shutdown > syscall is about to be called. Usually the init scripts will take care of this, > although I don't know how CentOS handles that

...rrent are OK. >>> >>> Mini-box support and documentation are very poor too - but you can?t help with that! >>> >>> I hope you can comment on the attached debug output which you requested. I?ve provided two - one on battery and the other on input power (which is 15v for my OpenUPS). (I have higher debug level options available but you asked for -DDD) >>> >>> The command I used to start the driver was /usr/sbin/usbhid-ups -DDD -a openups >>> >>> Finally, I?d be interested in the additional debug modes for usbhid-ups. This i...

...5T z$HO)YV11oa=Vqs{9Vgd1PKt|bFn1CFjA;cD6mhVrOR^<rttHQ9QB%whN6`YHYLe-< zQjQj>uPv&-8XQnwkjz2BC>ns@>Z^K>MIFSV4qYBIY9I)=gLRwt+LDjVnvco;xj;2C zd9KAr#qAsuSG#M>Pc-q}L^vt#HJG<OLMc**5nJ&m$qiN#$%U at fVoKx%oi3K0x4n78 z_GbGb{7h8IEKjzt*4==QkzAkVug<S^zOe1=UTKH;@L5druKW$bVB-4m0%15v%2 at nc z>D)uLipY@@P4CIaTpRqeP*C3n=;3$ihu;PGRNL9ppna+V;vfpT|0z1$C+MQM{EuR~ zw+(b}17tivc;2{<x%H++0x%E&(+cUv3al47n3WxuNmV_U-=|wl(rVt(?-`B<rl_yQ zeI4}}<DT<fJ-Rn|VhL4+RoaK~jOla7ef7^xS-GEW87huai!DoyxLWsycK!GKJPW>e z+qS={C3G5DGI>{BvZ at hp_HrliCT0*XMiLu#(nnwSs*9I*w)26_t?jH&E6...