Displaying 8 results from an estimated 8 matches for "1500ap".
Did you mean:
500ap
2006 Dec 11
2
howto setup BNT-1500AP on gentoo
Good afternoon. I try to put nut on gentoo. Has executed installation
by a standard command emerge nut. All has passed successfully. I use
UPS POWERCOM BNT-1500AP. It is connected to serial port 1, i.e. for my
system it/dev/tts/0. In/etc/nut/ups.conf
[powercom]
driver = powercom
port = /dev/tts/0
desc = "PowerCom BNT-1500AP on IP-PBX"
modelname = "BNT-1500AP"
linevoltage = 230
type = KIN1500AP
also trying:
[powercom]
driver = powercom
p...
2013 May 01
1
Powercom BNT-1500AP serial config
Hey all,
Finally got around to hooking up my Powercom BNT-1500AP to nut. It's the
old serial interface.
Connects okay and gets most information, but a couple of data are way off.
Any config recommendations or upgrade recommended? I've played with
config a little, but no hits yet.
Details:
NUT version 2.4.3
ups.conf:
[ups]
driver = powerco...
2008 Jan 02
0
Inform Guard S 1500AP
Hello,
Maybe this information is good for more people.
Inform Guard S 1500AP uses megatec.
The information on http://www.networkupstools.org/compat/stable.html
tricked me :-)
Regards,
Michael
-------------
Hi;
Our UPS is using the megatec protocol.
Best regards
C. Noyan Gursoy
Technical Service Engineer
-----Original Message-----
From: Alican YILMAZ
Sent: We...
2005 Jul 06
0
Powercom BNT-1500AP
Hey all,
Does anybody know there is a full working setup for the PowerCom
BNT-1500AP. I got some stuff working with the Powercom driver and the
type set to "KIN1500AP". But it seems that there is still missing
usablity. I was wondering if anybody found any better configs?
---- excerpt of ups.conf
[AVR1500]
driver = powercom
port = /dev/ttyS0...
2011 Jul 19
2
KIN-1500AP RM + Windows 2008 64-bit Standard R2 SP1 (nut 2.6.1)
I have only RS-232 on the box (meanwhile, it was manufactured on march of
2011)
Here is my configs:
nut.conf:
*
*
MODE = netserver
ups.conf:
*
*
[KIN1500]
driver = powercom
port = notUsed
desc = "Powercom KING PRO KIN-1500AP RM"
upsd.conf:
*
*
LISTEN 192.168.1.2 3493
upsd.users:
*
*
[monuser]
password = xxxxxxxx
upsmon master
upsmon.conf:
*
*
MONITOR KIN1500 at 192.168.1.2 1 monuser xxxxxxxx master
MINSUPPLIES 1
SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe -s -t 0&qu...
2005 Aug 19
1
Sustainer S-1000C (Powercom protocol)
...t;>>| Serial Port: /dev/ttyS0
|
| Comm. Status: Conn.
|
|
Press Ctrl_C to Exit UPSMON Plus Display Program!!
Nevertheless, I haven't managed to make NUT work with it. When I tried using
the powercom driver, I got the following response, no matter which type I
entered (including the KIN1500AP I've seen on the wayback machine had the
same problem -
http://web.archive.org/web/20041020015206/lists.exploits.org/ups/Jan2004/00003.html):
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.1
Network UPS Tools - PowerCom and similars protocol UPS driver $ Revision:
0.5 $ (2.0...
2010 Jul 02
0
Powercom driver patch
...ol as King one. It is not based on any official
specs, but rather empirical one. On the other hand, the code being
modified is rather ambiguous itself with several type redefinitions.
Anyway patched NUT-2.4.1 works flawlessly with my Powercom IMD-825AP
(and will definitely work with BNT-1000AP, BNT-1500AP as reported by
other users who applied similar patches independently).
Hope the proposed patch can be committed to the trunk.
Best regards,
Andrey
====================================================
--- drivers/powercom.c 2009-02-17 12:20:48.000000000 +0300
+++ drivers/powercom.c 2010-07-01 2...
2005 Jul 30
0
Sustainer S-1000C
...|
|
Press Ctrl_C to Exit UPSMON Plus Display Program!!
Nevertheless, I haven't managed to make NUT work with it. When I tried using
the powercom driver, I got the following response, no matter which type I
entered (including the KIN1500AP I've seen on the wayback machine had the
same problem -
http://web.archive.org/web/20041020015206/lists.exploits.org/ups/Jan2004/00003.html):
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.1
Network UPS Tools - PowerCom and similars protocol UPS driver $ Revision:
0.5 $ (2.0...