search for: 1280x1024

Hi folks, I don't seem to be able to enable the DVI-I output of an old FX 5200 behind a KVM switch. Autodetection works fine if the FX 5200 DVI output is switched to the monitor, but when it is not, I have not found a way to force-enable it. Here is what I tried: *) used the video=DVI-I-1:1280x1024-24 at 60e kernel parameter (framebuffer still sits at 1024x768) *) used "options drm_kms_helper edid-firmware=edid/edid.bin" in /etc/modprobe.d/nouveau.conf. "no initrd here, drm-kms-helper.ko is loaded during bootstrap) *) downloaded the edid from the monitor and validated its cor...

...o using winecfg and installed. Empires II installed directly from disk and would not run after the install until I applied the no_Cd_patch and not are fine. AoEIII has 3 CDs so copied all files to a directory and installed. Now, to get wine to behave itself, I have set the graphics up to be in a 1280x1024 window and works fine from my calling script: #!/bin/bash cd "/home/jserink/.wine/drive_c/Program Files/Microsoft Games/Age of Empires III/" wine age3.exe Now, I don't want all of wine to be in a 1280x1024 window, only the games so, I set winecfg to turn off the virtual desktop and...

...#39;s recommendations (1280 x 1024 @ 60Hz). so I tried manually setting refresh rates to match the manual's recommendations. At the moment my xorg.conf has ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "Monitor 1280x1024" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 60.0 - 72.0 VertRefresh 60.0 - 72.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nv" EndSection Se...

...Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: xake at rymdraket.net QAContact: xorg-team at lists.x.org My system have two monitors connected to my system. My xorg.conf starts VGA-0 to the left of DVI-A-0. Both starts at resolution 1280x1024 by default (not changed by me). VGA-0 is capable of running the resolution 1600x1200, but here comes the problem: xake at lillen ~ $ xrandr --output VGA-0 --mode 1600x1200 xake at lillen ~ $ xrandr Screen 0: minimum 320 x 200, current 2560 x 1200, maximum 3000 x 3000 VGA-0 connected 1600x1200+0+0...

...0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 76.0* With the Nvidia Driver : xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 Le 27/10/2014 05:19, Ilia Mirkin a écrit : > What does 'xrandr' output? > > On Sun, Oct 26, 2014 at 10:51 AM, Victor Lefèvre<victorlefevre at free.fr> wrote: >...

...#39;vnc=1'' in my Xen config file and an "UltraVNC server" running inside the Windows XP HVM. (but I usually only connect to the UltraVNC server). I''m not a VNC guru... Is it possible to somehow have a Windows XP system displayed using VNC that has a screen bigger than 1280x1024? Like 1600x1200 or 1920x1200? Or is the emulated Cirrus Logic 5446 limited to 1280x1024 and this limitation also applies to VNC? (wether it''s the VNC provided by Xen or UltraVNC?) ___________________________________________________________________________ Yahoo! Mail réin...

...ium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: malsaqer at gmail.com QAContact: xorg-team at lists.x.org Created an attachment (id=37547) --> (https://bugs.freedesktop.org/attachment.cgi?id=37547) Xorg.0.log I have two 1280x1024 identical monitor and nv18 MX 440 older nvidia card. The card has one VGA-1 and one DVI-I outputs. The operating system is Fedora 13 and xorg-x11-server-Xorg-1.8.2-2.fc13.i686 xorg-x11-drv-nouveau-0.0.16-7.20100423git13c1043.fc13.i686 ___________________________ $ lspci -vnn | grep nVidia VGA compa...

Hi, Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing has a 1440x900 LCD screen, but I don't get X the work with that resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)) Google suggested to use '915resolution', which I installed (915resolution-0.5.2-1.el4.rf), but that doesn't help. Regards, --

Does anyone have any experience with the combination of a Thinkpad R40 and the ATI Radeon Mobility M6 LY video chip? I''ve had CentOS 4.1, 4.2, and now 4.3 running just great with 1024x768 resolution, but according the IBM specs, this chip is capable of 1280x1024. A quick lspci -v | grep ATI spewed the following: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA]) I can successfully change the settings under the display menu to 1280x1024, but upon restarting X the default greeter crashes. After that, it pic...

...t connected 1024x768+0+0 0mm x 0mm >> 1024x768 76.0* >> >> >> With the Nvidia Driver : >> >> xrandr: Failed to get size of gamma for output default >> Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 >> default connected 1280x1024+0+0 0mm x 0mm >> 1280x1024 0.0* >> 1024x768 0.0 >> 800x600 0.0 >> 640x480 0.0 >> >> >> Le 27/10/2014 05:19, Ilia Mirkin a écrit : >> >>> What does 'xrandr' output? >>> >>>...

In the vein of the "Can't get resolution higher than 1280x1024" and "Another CentOS 5 oddity..." threads, I just installed CentOS5 w/Xen kernel on a Sony VAIO desktop with an nVidia NV5M64 (RIVA TNT2 64 Pro) card, using an old Samsung SyncMaster 700NF monitor. system-config-display chose the highest possible resolution for the monitor and Xorg...

...ion 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA]) X: X Window System Version 6.8.2, using KDE in runlevel 3 kernel: Linux version 2.6.9-42.0.2.EL (buildsvn at build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) Monitor: Dell E176FP (LCD, resolution 1280x1024) Mouse: Compaq/Logitech PS/2 mouse with wheel The X driver used is i810 How I get into trouble: I connect to an NT 4.0 Workstation box running 800x600 resolution with vnc; my resolution is 1280x1024 so the letters are too small for me and I switch resolution to 1024x768 or 800x600 using Ctrl-Al...

...rent resolution properly. With the closed nvidia driver, I usually just click on krandrtray in KDE and pick a different resolution. With nouveau driver, though, it works as well, but only partially. I can see the resolution is theoretically changed (fonts, windows are bigger when I change from 1280x1024 to 1024x768), but technically, in my LCD monitor info I can see the resolution is still 1280x1024. Why? Because of this issue, I can't use my beamer (dual-head), which only supports resolutions up to 1024x768. -- Tomasz Chmielewski http://wpkg.org

...onitor section (II) NOUVEAU(0): Output TV-1 has no monitor section (II) NOUVEAU(0): Output DVI-I-1 disconnected (II) NOUVEAU(0): Output VGA-1 connected (II) NOUVEAU(0): Output TV-1 disconnected (II) NOUVEAU(0): Using user preference for initial modes (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024 (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280) (**) NOUVEAU(0): Driver mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157....

Hello all, I can't get higher than 1280x1024 resolution (60hz, 24 depth). I'm running Centos 5 x86 64bit on AMD Athlon64 x2 4600, Geforce 6200 PCI express. Even as root, that is the highest I can set the display. I am guessin the kernel does not support my combo? I've also tried Nvidia's driver from their site, this is what I...

Hi everybody, I'm using Lubuntu 14.04 on an old desktop PC with a NVIDIA GeForce 7600 GS and a screen of 19 inches. The maximal resolution of my screen with Nvidia drivers is 1280x1024. (In particular, I use the Nvidia 331.89 driver) With Nouveau driver, the maximal resolution falls to 1024x768. Is there a solution for increasing the maximum resolution with Nouveau ? Best regards, Victor Lef?vre

...074] (II) NOUVEAU(0): 640x480 at 60Hz [ 4677.074] (II) NOUVEAU(0): 640x480 at 75Hz [ 4677.074] (II) NOUVEAU(0): 800x600 at 60Hz [ 4677.074] (II) NOUVEAU(0): 800x600 at 75Hz [ 4677.074] (II) NOUVEAU(0): 1024x768 at 60Hz [ 4677.074] (II) NOUVEAU(0): 1024x768 at 75Hz [ 4677.074] (II) NOUVEAU(0): 1280x1024 at 75Hz [ 4677.074] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 4677.074] (II) NOUVEAU(0): Supported standard timings: [ 4677.074] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 4677.074] (II) NOUVEAU(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 4677.07...

http://bugs.freedesktop.org/show_bug.cgi?id=12825 Summary: TvTime shows only the upper left corner (~ 1280x1024) in Randr1.2 Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at li...

Today I've got first video clips made by the camera and compressed "on the fly" - 1280x1024x30fps. Image quality is far from perfect - I don't have yet any way to preview images, and a single acquisition still requires a bunch of commands. So I'm really close to have a camera that will be able to serve the Ogg/Theora streams, now but will it be possible to play it on a PC? I could...

...> > nouveau 0000:02:00.0: disp: 0878: 00000000 > > nouveau 0000:02:00.0: disp: 0880: 05000000 > > > > Looks like it's using 8bpp (0x1e00) in 32MB case but 16bpp (0xe800) in > > 64MB case. Why? > > > > I get blank screen even with 64MB with video=1280x1024-8 kernel > > parameter. Console works with video=1280x1024-16 even with 32MB stolen > > memory. > > > > Conclusions: 8-bit support is broken and bpp reduction is weird. > > OK, well that makes a *ton* of sense (8bpp being broken). > > I think the idea of bpp redu...