search for: 11x

Sir, Here is the working Audiocodes MP-11X FXO configurations to work with Asterisk. ;************** ;** Ini File ** ;************** ;Board: MP-118 FXO ;Serial Number: 905371 ;Slot Number: 1 ;Software Version: 5.00A.024 ;DSP Software Version: 204IM => 209.13 ;Board IP Address: 192.168.0.195 ;Board Subnet Mask: 255.255.255.0 ;Board De...

I'm trying to get a MP-114 FXS/FXO gateway working with Asterisk. It registers fine and I can call between the MP-114 and other extensions, but I'm not having much luck with the FXO ports. syslog shows the problem to be in the MP-114 configuration. Can anyone help?

Razza, I have a MP114 FXO/FXS that I have never got to work , even as an FXS, even though I have several other FXS's that work fine ie Linksys PAP2 etc.. would you put up your config? PDE

Hi I'm working on installing R and Rcmdr on a Mac running Leopard. I've had it running in the past and had to reinstall 11X iwhen putting some notes together for students. To get screen shots I reinstalled 11X without unstalling it first. Having loaded the additional packages with Rcmdr, when I try to open Rcmdr I now get the following error messages: Error: .onload failed in 'loadNamespace' for 'Rcm...

...chines on IPsec VPN which is a subnet of my bigger LAN ( ie I have machines on the LAN which is not in the VPN ), specifically :- 192.168.132.0/29:0 -> internet ---> 192.168.1.192/27:0 ( local subnet ---> internet--> remote subnet ) # ip route list ... 192.168.1.192/27 via 21x.18x.11x.8x dev ipsec0 192.168.1.0/24 via 192.168.15.146 dev eth0 ... Now, the machines in the local subnet ***INSIDE*** 192.168.132.0/29 when accessing remote subnet 192.168.1.192/27 are routed to the internet using VPN and this is behaving correctly. But machines in the local subnet ***OUTSIDE*** of...

...file or directory Assuming raw pcm input file LAME 3.98.2 32bits (http://www.mp3dev.org/) CPU features: MMX (ASM used), SSE (ASM used), SSE2 Using polyphase lowpass filter, transition band: 16538 Hz - 17071 Hz Encoding <stdin> to <stdout> Encoding as 44.1 kHz j-stereo MPEG-1 Layer III (11x) 128 kbps qval=3 fatal error: can't update LAME-tag frame! Here's the really funny thing: THE FILE EXISTS! OK, so I re-install libogg, libvorbis, every library I could think of, re-installed ezstream itself (and Ices-CC, too, just in case), got it all nice and clean, then tried it again....

Banging my head against a Seagate 3TB USB3 drive. Its marketing name is: Seagate Expansion 3 TB USB 3.0 Desktop External Hard Drive STAY3000102 format(1M) shows it identify itself as: Seagate-External-SG11-2.73TB Under both Solaris 10 and Solaris 11x, I receive the evil message: | I/O request is not aligned with 4096 disk sector size. | It is handled through Read Modify Write but the performance is very low. However, that''s not my big issue as I will use the zpool-12 hack. My big issue is that once I zpool(1M) export the pool from my...

...1648 test_fpu 52624 58224 58320 tfft 18416 18456 18600 The compile times with optzns are 26% slower than stock dragonegg but 12% faster than stock gcc 4.5.4. The most interesting executable size difference is gas_dyn which fastest with optzns but 11x larger in size with stock gcc 4.5.4 compared to either stock dragonegg or dragonegg with optzns. This is likely much improved in gcc 4.6 with the new -fwhole-file default. On Thu, Jun 09, 2011 at 09:51:51AM +0200, Duncan Sands wrote: > Hi Jack, thanks for these numbers. Can you also please mea...

...24 58224 58320 > tfft 18416 18456 18600 > > The compile times with optzns are 26% slower than stock dragonegg > but 12% faster than stock gcc 4.5.4. The most interesting executable > size difference is gas_dyn which fastest with optzns but 11x larger > in size with stock gcc 4.5.4 compared to either stock dragonegg or > dragonegg with optzns. This is likely much improved in gcc 4.6 with > the new -fwhole-file default. > > On Thu, Jun 09, 2011 at 09:51:51AM +0200, Duncan Sands wrote: >> Hi Jack, thanks for these numbe...

...ent). (Of course, it is not my goal to end there. I want to get access to the advanced flexibility of a more modern treatment.) Here is the problem statement in BMDP control language: /input title='Augenbewegungen'. variables=4. file='latm.dat'. format='11x,f7.0,f7.0,f12.4,f10.0'. /variables names= llat,rlat,vg,diff. /design ndep = 4. level=21,2,2,9,3. names = pers,retest,direct,flicker,ground. random = pers. fixed = retest,ground,direct,flicker. model = 'P,R,G,D,F'. /end. /finish. I tried in R (some minor differences in variable naming):...

...ape), and it sounds great. BTW, one question, my Ipaq has serious problems trying to run the decoder_example locally (has an ARM with no FPU). Any suggestion so I could run the decoder inside the Ipaq? Any of you know how to encode at a lower bit rate, I tried `32' but it keeps insisting on 11X.? thanks --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe me...

Hi, table1D() below can be up to 60x faster than base::table() for the 1D case. Here are the detailed speedups compared to base::table(). o With a logical vector of length 5M: 11x faster (or more if 'useNA="always"') o With factor/integer/numeric/character of length 1M and 9 levels (or 9 distinct values for non-factors): - factor: 60x faster - integer/numeric vector:...

Dear friends, I am wondering if there is any efficient way of extract the country code, area code, and local code into 3 different variables from one DNID that can look like 001630233-4333 or 0086213345333? International code can be 011, or 00. National code can be 0 or 1 Country code can have 2 or 3 digits Area code can have 2 or 3 digits Local num can be 7-10 digits Is there anyway to break

...is repeating a message already sent to the list]. I am trying to move a project to R (base or nlme), for which I have a partial solution in BMDP 8V. Here is the 8V control language: /input title='Augenbewegungen'. variables=4. file='latm.dat'. format='11x,f7.0,f7.0,f12.4,f10.0'. /variables names= llat,rlat,vg,diff. /design ndep = 4. level=21,2,2,9,3. names = person,retest,direct,flicker,ground. random = person. fixed = retest,ground,direct,flicker. model = 'P,R,G,D,F'. /end. /finish. BMDP 8V calculates the anova and reports F-values for...

On Fedora 20 (Heizenbug), when the command: /usr/local/bin/ezstream -q -c "{some-file}.xml" is executed, the error message: /usr/loca/bin/ezstream: error while loading shared library: libtag_c.so.0; cannot open shared object file: no such file or directory is displayed. "find" shows it's in /usr/lib64, which is a link to /usr/lib64/libtag_so.0.0.0. Is there something I

Hi Jack, thanks for these numbers. Can you also please measure compile times? I'm thinking of enabling gcc optimizations by default, but I don't want to increase compile times, which means choosing a value for the -fplugin-arg-dragonegg-llvm-ir-optimize option that is low enough to get good compile times, yet high enough to get fast code. It would be great if you could play around with

...58320 >> tfft 18416 18456 18600 >> >> The compile times with optzns are 26% slower than stock dragonegg >> but 12% faster than stock gcc 4.5.4. The most interesting executable >> size difference is gas_dyn which fastest with optzns but 11x larger >> in size with stock gcc 4.5.4 compared to either stock dragonegg or >> dragonegg with optzns. This is likely much improved in gcc 4.6 with >> the new -fwhole-file default. >> >> On Thu, Jun 09, 2011 at 09:51:51AM +0200, Duncan Sands wrote: >>> Hi Jack...

Hi Trying to get WinXP HVM to install as domU on AMD. Got latest Xen Kernel and Xen package (NOT unstable or debug). When start, a window pops up for few seconds.. then it dies and another one comes up... and it disappears too. (Xen is trying to restart and giving up because the restart happens in 2 seconds..) It seems DomU is not able to read/understand something from Cirrus VGABIOS.

Hi Trying to get WinXP HVM to install as domU on AMD. Got latest Xen Kernel and Xen package (NOT unstable or debug). When start, a window pops up for few seconds.. then it dies and another one comes up... and it disappears too. (Xen is trying to restart and giving up because the restart happens in 2 seconds..) It seems DomU is not able to read/understand something from Cirrus VGABIOS.

>.. And KMS modesetting works properly now in Xen dom0! My onboard ATI Radeon is the following: > # lspci -v | grep VGA  11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00   [VGA controller]) Environment :  Xen 4.0.1-rc6 & 2.6.32.19 on top of F13 ( .config attached) [root@fedora13 ~]# lspci -v | grep VGA 01:00.0 VGA compatible controller: ATI