search for: 114ms

I posted this question a while back, and I'm posting again in hopes that someone has some ideas. Sorry if you've already seen this. When dialing out using a SIP or IAX provider (Broadvoice, SimpleTelecom, VoicePulse Connect) I often find that after the call is answered the first few seconds of audio are cut off (i.e. I don't hear the called party). This usually results in the called

...em, upon receiving the SIP INVITE, would reply with a 100 Trying, followed immediately by a 200 OK. Now, the two systems are actually on opposite sides of the Atlantic, and the sending system sent the INVITE with a very short retransmission timeout (T1 appeared to be 228ms due to a qualify time of 114ms). And by the time it received the replies from the receiving system, it had already retransmitted the INVITE. However, the receiving system, having sent the 200 OK, then received the repeat INVITE. It looks like it repeated the 200 OK, but then the ACK from the sending system didn't get recogn...

...rency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP pre-glapi 8G 155937 27 102899 14 1030285 54 1763 45 Latency 694ms 1333ms 114ms 229ms (note, sequential reads seem to have been influenced by caching somewhere?) After switching to gfapi: # dd if=/dev/urandom of=test.file bs=1M count=1024 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB) copied, 80.8317 s, 13.3 MB/s # echo 3 > /proc/sys/vm/drop_caches #...

It worries me how many threads talk about low performance. I'm about to build out a replica 3 setup and run Ovirt with a bunch of Windows VMs. Are the issues Tony is experiencing "normal" for Gluster? Does anyone here have a system with windows VMs and have good performance? *Vincent Royer* *778-825-1057* <http://www.epicenergy.ca/> *SUSTAINABLE MOBILE ENERGY SOLUTIONS*

Hi, i upgrade to sles sp1 with sernet packages and get the following error after upgrade. Its looks like that port 135 will not reached. Anyone who have an information about that or a solution? Thanks Sven orion:~ # samba-tool drs showrepl Failed to connect host 192.168.24.2 on port 135 - NT_STATUS_CONNECTION_REFUSED Failed to connect host 192.168.24.2 (orion.domain.local) on port 135 -

On 01/05/2018 02:27, Thing wrote: > Hi, > > So is the KVM or Vmware as the host(s)?? I basically have the same setup > ie 3 x 1TB "raid1" nodes and VMs, but 1gb networking.? I do notice with > vmware using NFS disk was pretty slow (40% of a single disk) but this > was over 1gb networking which was clearly saturating.? Hence I am moving > to KVM to use glusterfs