search for: 11.8

11.7 is working fine for me. I put on 11.8 and my "confbridge" that should be "muted" to users now sounds un-muted or like I am getting feedback. Did something change there??? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140310/7006af9c/attachment.html>

Hi there, I have some data which are convenient to enter as lists. For example: t1<-list(fname="animal1",testname="hyla",dspkr="left",res1=39.7,res2=15.0) t2<-list(fname="animal1",testname="bufo",dspkr="left",res1=14.4,res2=56.1)

users are registering over ws:// but while dialing A -> B , using either jssip/sipml5 I receive an error on B side saying , ice related information is missing , and in INVITE sdp mentioned fields are really missing. Exact error in console is SetRemoteDescription failed: Called with an SDP without ice-ufrag and ice-pwd lots of users are using webrtc with jssip/sipml5 + asterisk successfully.

Hi all, Has anyone tried conveying signaling tones (DTMF) through speex? If so, can i get an idea of the lowest bit-rate at which I can do so with 'tolerable distortion'. G.728 does so and G.729E (11.8 Kbps mode) is 'claimed' to do so but even if true, G.729 (rather G.729I - 11.8/8/6.4 kbps) does not allow me to go below 6.4 kbps if needed. Basically I am looking for a single codec

Hello, It's an alternative to use SAS by function in R? I want to plot d histograms by plot.from example bellow: Thank you! plot d 1 1 16.3 2 1 25.0 3 1 57.8 4 1 17.0 5 2 10.8 13 2 96.4 17 3 76.0 18 3 32.0 19 3 11.0 20 3 11.0 24 3 106.0 25 3 12.5 21 4 19.3 22 4 12.0 26 4 15.0 27 5 99.3 32 7 11.0 36

Hi Jean, Thats great news for me to start off with as I was planning to go with 16 Kbps ADPCM keeping in mind the issues and options I had. Now, whether the additional computation cost is worth the significant bandwidth savings, I have to see. Just wondering if it is possible to extend this logic to G3 and G4 fax as well, i.e. using a higher bit-rate and complexity mode for modem or fax instead of

Hi R Users, I am going to run a multiple linear regression with around 57 independent variables. Each time I run the model with just 11 variables, the results are reasonable. With increasing the number of independent variables more than 11, the coefficients will get ?NA? in the output. Is there any limitation for the number of independent variables in multiple linear regressions in R? I attached

hello everyone, I do have a usb ISDN modem that I would like to make it work with dahdi. is it possible? I am running debian 7, with dahdi 2.9, asterisk 11.8 dahdi cannot find it at the moment, unless there is something else to be done. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, here are the versions: dc01: Raspberry Pi 3 Model B Rev 1.2 root at dc01:~# cat /etc/debian_version 11.8 root at dc01:~# samba -V Version 4.17.12-Debian root at dc01:~# uname -a Linux dc01 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux Dc02: Raspberry Pi 3 Model B Rev 1.2 root at dc02:~# cat /etc/debian_version 11.8 root at dc02:~# samba -V Version

I have a 45 x 16 data frame consisting of dissimilarities among 10 colors, giving in each column the 45 = 10*9/2 pairwise judgments for one of 16 subjects. The rownames identify each pair of colors, e.g, "AC" = ("A","C"), and the pairs are ordered by columns in the lower triangle of each distance matrix. > helm.raw <-

In case a system is incapable of fax relay or if it is disabled, one of the easiest and safest options is to go for 40 kbps ADPCM compression (for fax upto 14.4 kbps)..even am new to this problem and the fair bit of seraching which i've done seems to suggest that the standard sloutions are to simply 'bypass' it else compress using ADPCM (40 k for fax upto 14.4 k, 32 k for fax upto 9.6

Hi, I am using asterisk 11.8 in combination with spandsp to send and receive T38 Faxes. All works fine, but I do not know how to get the remoteheader from the fax I receive. When I send a fax, there are Faxopts to set the localstationid and the headerinfo, but for receiving, there seems to only exist the Faxopts remotestationid but for sure on any fax I receive there is a remoteheaderinfo

ok how can I do to cancel le function factor for the moment ican't do this and I'm stuck with my problem for exemple Id_Rep Id_Geno Val_O Id_TrT1 1 1 64238 145 2 2 1 64238 1 1 3 1 64238 2 1 4 1 64238 1 1 5 1 64238 1 1 6 1 64238 2 1 7 1 64238 1 1 8 2

Is the following developed in my console output a recognized bug or am I using the cat function incorrectly? Thanks, Stan > ifelse(class(data[[n]])!="factor",{print("yes")},{print("no")}) [1] "yes" [1] "yes" > ifelse(class(data[[n]])!="factor",{cat("yes")},{cat("no")}) yesError in ans[test & !nas] <-

Dear all, I am attempting to explain patterns of arthropod family richness (count data) using a regression model. It seems to be able to do a pretty good job as an explanatory model (i.e. demonstrating relationships between dependent and independent variables), but it has systematic problems as a predictive model: It is biased high at low observed values of family richness and biased low at

>> GCC (4.5.2, Windows build from CodeSourcery) - With -O0: 110ms, with -O2: 215ms >> Clang/LLVM (Release mode, LLVM git hash 7f5714f4..., clang git hash >> 9d9cf5...) - With -O0: 110ms, with -O2: 640ms Hi Matt, I only see 2x slowdown on my machine (consistently, O2 and O3), but that's still bad. If you compile to IR then pass "opt -time-passes" you can get a

Hi Mainak, Speex will definitely be able to handle DTMF. The only question is what the minimum rate for that will be. I remember testing on a few tones at 8 kbps and I didn't hear too much distortion (though there have have been). The only thing I can recommend is to use a higher complexity setting that one would normally use. For voice, I can't really tell the difference between quality

Dear R-helpers; While using gnls() to fit a function > Gbht0t.gnls <- gnls(h2 ~ Rht(b0, b1, b2, h1,t1, t2), data=gbht10, + params=list(b0 + b1 + b2 ~ Sisp -1), start=c(strssb0,strssb1,strssb2)) I encountered an error: "Error in model.frame(formula, rownames, variables, varnames, extras, extranames, : invalid variable type " Rht is a defined function to be

I have the following data exported as a .txt file on Windows. Everything is working fine, except that the the data in the 10th column is treated as a factor. Date Week Time Completed Work_Delta Mean_Delta Balance Total Total_Delta Work Index Open_Bugs Bug_Delta Bug_Delta2 8/17/2009 4 11.8% 64 64 16 611 675 675 9.5% 0.81 333 31 -31 8/30/2009 6 17.6% 104 40 20 801 905 230 11.5% 0.65 269 32 -32

CentOS Errata and Security Advisory 2005:670 https://rhn.redhat.com/errata/RHSA-2005-670.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/xpdf-3.00-11.8.s390.rpm s390x: updates/s390x/RPMS/xpdf-3.00-11.8.s390x.rpm -- Pasi Pirhonen - upi at iki.fi - http://iki.fi/upi/ -------------- next part -------------- A non-text