search for: 10af

Hello. I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS And this UPS detected only with this section in ups.conf: [liebert] driver = liebert port = /dev/ttyS0 but only this variables available: device.mfr: Liebert device.model: MultiLink device.type: ups driver.name: liebert driver.parameter.pollinterval: 2 driver...

...simple usb-com cable because nut work with liebert driver on ttyS0 port. If that is the case, I doubt that usbhid-ups will be able to retrieve any additional information. > In ups.conf i tried: > > [liebert] > driver = usbhid-ups > port = auto > vendorid = 10af > explore > > but got error: > > Can't claim USB device [10af:0000]: could not detach kernel driver from interface 0: Operation not permitted > Driver failed to start (exit status=1) Usually the simpler reason is that the driver does not have permission to detach the kerne...

On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote: > I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. > lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS > > And this UPS detected only with this section in ups.conf: > > [liebert] > driver = liebert > port = /dev/ttyS0 I am confused. Are you using a serial cable with the liebert driver, or a USB cable with the usbhid-ups driver? -- Charles Lepp...

...usb-0000:00:1d.0-1.2/input0 desc = "Emerson Liebert GXT 4" My system is running Ubuntu 16.04 with nut version 2.7.2-4ubuntu1. This is what dmesg says: [26530.061874] usb 2-1.2: new full-speed USB device number 11 using ehci-pci [26530.156677] usb 2-1.2: New USB device found, idVendor=10af, idProduct=0000 [26530.156684] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [26530.156689] usb 2-1.2: Product: Liebert GXT4 [26530.156693] usb 2-1.2: Manufacturer: Emerson Network Power [26530.156696] usb 2-1.2: SerialNumber: 1607000058AFC23 [26530.174243] hid-generic 0003:10...

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups driver.parameter.pollfreq: 30 dri...

...ttery.charge.low: 38 battery.charge.warning: 38 battery.type: PbAc device.mfr: Emerson Network Power device.model: LiebertPSP device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.vendorid: 10af driver.version: 2.4.3 driver.version.data: Belkin HID 0.12 driver.version.internal: 0.34 ups.mfr: Emerson Network Power ups.model: LiebertPSP ups.productid: 0001 ups.serial: ups.status: OB ups.vendorid: 10af /etc/nut/ups.conf [upsname] ??????? driver = usbhid-ups ??????? port = auto ??????? vendor...

...I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor...

...ction > 0.002196 [D3] main_arg: var='driver' val='usbhid-ups' > 0.002280 [D3] main_arg: var='port' val='auto' > 0.002360 [D5] send_to_all: SETINFO driver.parameter.port "auto" > 0.006042 [D3] main_arg: var='vendorid' val='10AF' > 0.006172 [D5] send_to_all: SETINFO driver.parameter.vendorid "10AF" > 0.006402 [D3] main_arg: var='productid' val='0001' > 0.006490 [D5] send_to_all: SETINFO driver.parameter.productid "0001" > 0.006563 [D3] main_arg: var='bus...

...ction > 0.002196 [D3] main_arg: var='driver' val='usbhid-ups' > 0.002280 [D3] main_arg: var='port' val='auto' > 0.002360 [D5] send_to_all: SETINFO driver.parameter.port "auto" > 0.006042 [D3] main_arg: var='vendorid' val='10AF' > 0.006172 [D5] send_to_all: SETINFO driver.parameter.vendorid "10AF" > 0.006402 [D3] main_arg: var='productid' val='0001' > 0.006490 [D5] send_to_all: SETINFO driver.parameter.productid "0001" > 0.006563 [D3] main_arg: var='bus...

...ng device (1D6B/0002) (001/001) 0.001065 - VendorID: 1d6b 0.001071 - ProductID: 0002 0.001076 - Manufacturer: unknown 0.001082 - Product: unknown 0.001087 - Serial Number: unknown 0.001093 - Bus: 001 0.001098 Trying to match device 0.001104 Device does not match - skipping 0.001111 Checking device (10AF/0004) (002/007) 0.001126 - VendorID: 10af 0.001132 - ProductID: 0004 0.001137 - Manufacturer: unknown 0.001143 - Product: unknown 0.001148 - Serial Number: unknown 0.001154 - Bus: 002 0.001159 Trying to match device 0.001168 This Liebert device (10af:0004) is not (or perhaps not yet) supported by...

...ot;sudo service nut-server restart" > My system is running Ubuntu 16.04 with nut version 2.7.2-4ubuntu1. > > This is what dmesg says: > > [26530.061874] usb 2-1.2: new full-speed USB device number 11 using ehci-pci > [26530.156677] usb 2-1.2: New USB device found, idVendor=10af, > idProduct=0000 > [26530.156684] usb 2-1.2: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [26530.156689] usb 2-1.2: Product: Liebert GXT4 > [26530.156693] usb 2-1.2: Manufacturer: Emerson Network Power > [26530.156696] usb 2-1.2: SerialNumber: 1607000058AFC23 >...

...gt; device.serial: 22223106602D04C > device.type: ups > driver.name: usbhid-ups > driver.parameter.pollfreq: 30 > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.parameter.productid: 0002 > driver.parameter.synchronous: no > driver.parameter.vendorid: 10AF > driver.version: 2.7.4 > driver.version.data: Belkin/Liebert HID 0.17 > driver.version.internal: 0.41 > ups.mfr: Vertiv Co > ups.model: Liebert PSA5 > ups.productid: 0002 > ups.serial: 22223106602D04C > ups.status: OB > ups.vendorid: 10af > > As you can see, useful...

...e.mfr: Vertiv Co device.model: Liebert PSA5 device.serial: 22223106602D04C device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0002 driver.parameter.synchronous: no driver.parameter.vendorid: 10AF driver.version: 2.7.4 driver.version.data: Belkin/Liebert HID 0.17 driver.version.internal: 0.41 ups.mfr: Vertiv Co ups.model: Liebert PSA5 ups.productid: 0002 ups.serial: 22223106602D04C ups.status: OB ups.vendorid: 10af As you can see, useful information is missing from the Liebert/Vertiv: bat...

...gt;>> driver.parameter.bus: 001 >>> driver.parameter.pollfreq: 30 >>> driver.parameter.pollinterval: 2 >>> driver.parameter.port: auto >>> driver.parameter.productid: 0001 >>> driver.parameter.synchronous: no >>> driver.parameter.vendorid: 10AF >>> driver.version: 2.7.4 >>> driver.version.data: Belkin/Liebert HID 0.17 >>> driver.version.internal: 0.41 >>> input.frequency: 50.0 >>> input.voltage: 221.8 >>> output.voltage: 222.6 >>> ups.load: 8 >>> ups.mfr: Emerson Netw...

...l: 2 driver.parameter.port: auto driver.parameter.productid: 0002 driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: Belkin/Liebert HID 0.17 driver.version.internal: 0.41 ups.mfr: Vertiv Co ups.model: Liebert PST5 ups.productid: 0002 ups.serial: ups.status: OL ups.vendorid: 10af when I run # service nut-client start I begin getting these: Broadcast message from nut at nabhas (somewhere) (Mon Sep 14 17:32:14 2020): UPS networkups is unavailable Broadcast message from nut at nabhas (somewhere) (Mon Sep 14 17:36:44 2020): Communications with UPS networkups established Br...

...{UPOWER_VENDOR}="iDowell" ATTRS{idVendor}=="0764", ENV{UPOWER_VENDOR}="Cyber Power Systems" ATTRS{idVendor}=="09ae", ENV{UPOWER_VENDOR}="TrippLite" ATTRS{idVendor}=="0d9f", ENV{UPOWER_VENDOR}="PowerCOM" ATTRS{idVendor}=="10af", ENV{UPOWER_VENDOR}="Liebert" # Hewlett Packard +ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f06", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS...

Replaced ups with a new Liebert UPS and it seems the device may not be known to nut. Below is output of lsusb: ID 10af:0002 Liebert Corp. PowerSure PST UPS Sent from Outlook<http://aka.ms/weboutlook> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231204/7c08a727/attachment.htm>

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacturer=Liebert S: Product=Liebert PSP 350 FW: 02 S: SerialNumber=0404200536BT019 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms # ./upsdrvctl start Network UPS Tool...

Hello, what does the wine error message "unknown DOS version" mean? Will I have to change my wine configuration in some way? Or is the program not runnable with wine at all? Any hints are appreciated. Thanks in advance. Martin

...nected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor...