search for: 10.4.11

yes that is what i did. got the "requires version 7.0.0 or later, but libiconv.2.dylib provides version XYZ" (forgot which version i had before). removed libiconv, downloaded compiled and installed the new one (libiconv-1.13.1), then i just get $ flac Bus error i reinstalled flac 1.1.4, still runs fine (but doesn't support multichannel). cheers, -sciss- Am 05.08.2009 um

hi, according to the FAQ flac supports multichannel formats. i had no luck with 1.1.4 though ( "Untitled.aif: ERROR: unsupported number channels 8 for AIFF" ), i guess that feature was added in 1.2? unfortunately, the binary for 1.2 does not run on OS X 10.4 (says libiconv is too old). i removed libiconv and reinstalled that from source, but then flac 1.2.1 just prints

Awesome work Wayne. I have been following the various threads about running rsync 3.0.0 on MacOS X 10.4.11 and wanted to confirm that following all the various bits of advice yields a clean running rsync (as tested by backup bouncer). I am running MacOS X 10.4.11 on PPC. The following is a synopsis of my installation procedure (as gathered from the various emails in the archive) - note

Hi, Any ideas why HUGE_VALF is not accepted as a float constant on Mac OS X 10.4.11 (Intel)? ./llvm/include/llvm/CodeGen/LiveInterval.h:569: error: floating constant exceeds range of 'float' ./llvm/include/llvm/CodeGen/LiveInterval.h:574: error: floating constant exceeds range of 'float' llvm/lib/CodeGen/CalcSpillWeights.cpp:111: error: floating constant exceeds range of

Hello, I have 60 Macintoshs on Mac OS X 10.4.11 for learn "R" to studient of University and i want to Install New Packages. I click on the button "access list Mirrors" and it propose me a list of mirrors. None work correctly. All the mirrors take an error. For exemple for the Lyon (France) Mirror, it write : > trying URL

On May 11, 2009, at 6:07 PM, Ronald D. Mabbitt wrote: > I was curious -- is there a known issue with trying to use fxruby > gems under Mac OS X 10.4.11? After installing fxruby-1.6.19 via gem > under ruby 1.8.6, I''m getting load errors indicating that fxruby is > looking for the libpng library in /usr/X11/lib, when in fact Mac OS > X 10.4.11 doesn''t even

Hello, I apologize if this has been covered before but has anyone successfully built llvm on Mac OS X Tiger (10.4.11)? I upgraded to Xcode 2.4.1 and got the binaries for the llvm-gcc frontend and the source for llvm. I built llvm but realized that the frontend binaries required libiconv version 7.0.0. but the version on Tiger is 5.0.0. Trying to build the frontend from source gives me a bunch

Looks like I was a little too ambitious in getting version LLVM-2.5 to build on Mac OS X Tiger which uses gcc 4.0.1. LLVM -2.2 built fine. I did get the LLVM-2.5 tree to build but it was the gcc front-end part of it that failed. If anyone has built the both parts of version 2.5 on Tiger please let me know. Thanks, Bijoy. On Mon, Mar 30, 2009 at 11:40 PM, Bijoy Thomas <bijoyjth at

I am using rsync 3.0.3 to copy a remote RAID volume on one Xserve to the local RAID volume on an other Xserve. Both Xserves are running OS X Server 10.4.11. I have compiled rsync 3.0.3 on both machines and patched it following Mike Bombich's instructions at http://www.bombich.com/mactips/rsync.html After some struggles, and with invaluable help from the list, I how have an rsync script running

Check that ACL's are enabled on the destination volume. Details on how to do this are available from the following URL : http://connect.homeunix.com/lbackup/doku.php?id=access_control_lists Hope this helps. > I am using rsync 3.0.3 to copy a remote RAID volume on one Xserve to > the > local RAID volume on an other Xserve. Both Xserves are running OS X > Server > 10.4.11.

Hello, I tried the R-Sig-Mac list with this query, but had no takers. I hope that the following isn't too far off the mark for this list. Many thanks in advance if someone can help me out! Quick summary: I can't get RSPerl working on a PPC G5 with the pre-compiled binary for Mac OS X, but it does work if I compile R from source with the "--enable-R-shlib" flag. If I

Dear All, I'm trying to install the source package RGtk2 (RGtk2_2.12.5-3.tar.gz) on a i-Mac running os x 10.4.11: Nome modello: iMac Identificatore modello: iMac6,1 Nome processore: Intel Core 2 Duo Velocità processore: 2.16 GHz Numero di processori: 1 Numero totale di nuclei: 2 L2 Cache (per processore): 4 MB Memoria: 2 GB Velocità bus: 667 MHz Versione Boot

You no doubt have already found a solution or given up, but in case someone else (like me!) is trying to find a solution to the same problem, here was mine: upgrade your Xcode Tools version. Grab version 2.5, if you're running OS 10.4 (Tiger), and try again. You'll probably need to clean up the build directory... I THINK the command is port clean --all wine, but I did this manually so

This error came up after half-hour of installing wine: new-host:~ staruhinevgenij$ sudo port install wine Password: ---> Building wine with target depend all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_wine/work/wine-1.0.1" && make depend all "

I installed WINE today through Macports, I have X11. X11 SDK and Xcode installed. I am trying to get an old game called Axis and allies 1998 which I've got to work in Ubuntu before just fine working on this mac. I installed the game, and when I try to run the game .exe I get the following error in the terminal and the game never opens. Allies Joshua$ wine AxisAllies.exe Could not load

Hello all, I was eager to test the fresh release with MacOS X using "bbouncer" This is how I compiled and run the tests: patch -p1 <patches/osx-create-time.diff patch -p1 <patches/fileflags.diff ./prepare-source patch -p1 <patches/backup-dir-dels.diff ./configure make make test sudo make install Then compiling and running "bbouncer" from

I have also been eager to test bbouncer The latest source passes with flying colours! but make check finds some problems with xattrs if not run by sudo I have xattr in /usr/local/bin/ from the source found at: http://dev.bignerdranch.com/public/bnr/eXttra.zip What I did: cd /usr/local/Source rsync -av --exclude=.git/ rsync://rsync.samba.org/ftp/unpacked/rsync . rsync -av --exclude=.git/

This may not be an rsync-specific question, but it is certainly stopping me from moving forward with rsync and I am sure it has a simple solution. I have written a simple shell script to rsync disks attached to a Mac OS X Server 10.4.11 Xserve box at our offices to a similar Mac OS X Server 10.4.11 setup at our colocation facility. The script runs rsync 3.0.3 on the machine at the colocation

On Dec 30, 2008, at 4:55 PM, Misha Brukman wrote: > 2008/12/30 Scott Michel <scottm at aero.org> > Not entirely sure how to categorize this particular problem, but it's > clearly platform test related: "grep -w" appears to operate > differently on the x86_64 linux buildbot versus my local Mac OS > 10.4.11 and Ubuntu x86_64. In the CellSPU's shift_ops.ll test

Sorry, I forgot to mention. It's a PPC PowerBook G4 running Mac OS X 10.4.11. -bw On Jan 25, 2008, at 6:14 PM, Dale Johannesen wrote: > What target? > > On Jan 25, 2008, at 6:06 PM, Bill Wendling wrote: > >> Here are my test results for the 2.2 prerelease. >> >> Built objDir == srcDir, release, and with the pre-built LLVM-GCC >> binary. >>