search for: 1.5mbps

Hello everyone, I have a Tripp-Lite UPS (smart1500rmxl2ua) I'm trying to get working with nut. This is a FreeBSD 10.3 box. I've tried using the usbhid-ups<http://networkupstools.org/docs/man/usbhid-ups.html> driver but everytime I try to start up nut, I get this: # upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4)

# usbconfig -d ugen0.2 dump_device_desc ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x09ae idProduct = 0x0001

OK. Now I show my ignorance. What's the difference between a T-1 and a channelised T-1? I see that Covad's voip service (formerly GoBeam) requires a channelised T-1. Then I read recently on the list that many T-1s being installed are actually HDSL....which would be not a T-1 at all...right? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist

I am having problems with mouse, keyboard and APC UPS. When attempting to start apcupsd I get the following error: Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd error shutdown

I am thinking about a change to our company's phone "layout" and would like to get comments from people who have done something similar. Currently, we have 3 locations - each with their own Asterisk PBX. The corporate office has a PRI. Each remote location has a SIP provider for 5 channels of SIP going to their own PBX. Interoffice calls use the PSTN. Most inbound calls come to

>> >> The output was also not as big as you made it out to be. > > Well, I didn't expect the driver to fail *that* badly :-) > > Assuming the UPS is still at /dev/ugen4.2, can you try the following command? (Probably needs to be run as root, with the driver stopped.) > > usbconfig -u 4 -a 2 dump_curr_config_desc Here is output of the command. Thank you for

Alright. Sorry to bother you guys. Apparently after I rebooted the box, it started working now on the tripplite-usb driver. One correct also. I didn't have it installed from ports but from binary pkg. (pkg install nut) I doubt this did anything but I did create nut.conf because it wasn't there before. I set it to standalone. Again, sorry to bother you guys. I'm retarded. Nick

Charles, Here is the output: ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x06da idProduct = 0x0005 bcdDevice = 0x0003 iManufacturer = 0x0003 <PPC>

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

> >> usbconfig -u 4 -a 2 dump_curr_config_desc > > Here is output of the command. Thank you for your help with this. > > ugen4.2: <product 0x0601 CyberPower Systems> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA) > [...] > bLength = 0x09 > bDescriptorType = 0x21 > bDescriptorSubType = 0x10 >> RAW dump: >> 0x00 | 0x09, 0x21,

On Feb 3, 2014, at 9:05 PM, Chris Duffy wrote: > Thx for the info Charles. > > Here is what I am seeing from > 'usbconfig list' [...] > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > > > The last line I guess is key. Unfortunately, it is not very unique: the vendor can pick the string "USB UPS PPC", but the drivers

> On Oct 11, 2016, at 1:35 PM, Nick Teague <nick.teague at smartfox.us> wrote: > > ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) To determine the proper driver, would you please run the following usbconfig command as root? Here's an example from my UPS: # usbconfig -d ugen0.2 dump_device_desc ugen0.2:

I'm sure I'm missing something, but I can't seem to get NUT working on FreeBSD. bryce at tahiti[/usr/local/etc/nut]>cat ups.conf [belkin] driver = usbhid-ups port = auto vendorid = 050d #productid = 0751 bryce at tahiti[/usr/local/etc/nut]>s /usr/local/libexec/nut/usbhid-ups -DDDDD -a belkin Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31

Here is my load balancing routes: - ip ro add default scope global nexthop via 192.168.200.254 dev eth0 weight 4 nexthop via 60.1.2.9 dev eth3 weight 1 nexthop via 60.1.3.7 dev eth4 weight 1 192.168.200.254 - Have 5Mbps 60.1.2.9 - Have 1.5Mbps 60.1.3.7 - Have 1.5Mbps But, I still see lots of traffic goes to 60.1.2.9 and 60.1.3.7 The 60.1.2.9 hits 1.4Mbps and the 60.1.3.7 hits 1.3Mbps whereas

Here is what I get: # usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes =

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This

My NFS setup is a heartbeat setup on two servers running Active/Passive DRBD. The NFS servers themselves are 1x 2 core Opterons with 8G ram and 5TB space with 16 drives and a 3ware controller. They're connected to a HP procurve switch with bonded ethernet. The sync-rates between the two DRBD nodes seem to safely reach 200Mbps or better. The processors on the active NFS servers run with a load

Hi Roy, It seems that I wasn''t clear. Lets give an example. I have a machine with a single ethernet interface, with two IP addresses A and B. This is done using two virtual interfaces. A is my IP address in ISP-A. B is my IP address in ISP-B. The physical line to ISP-A is 1.5Mbps. The physical line to ISP-B is 256kbps. I want to shape the traffic so that, for example, HTTP traffic

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =

Charles, For what it is worth, I also have a Cyber Power CP900AVR laying around that I can test with. Joe Gzesh Sent from Zimbra Open Source Mail Server. Hosted at my House. Ask me how to set up your own Zimbra server. ----- On Sep 25, 2015, at 7:34 AM, Joseph Gzesh louis at frentzgzesh.info wrote: >> >>> usbconfig -u 4 -a 2 dump_curr_config_desc >> >> Here is