Displaying 20 results from an estimated 41 matches for "0xec00".
Did you mean:
0xe000
2011 Jul 24
3
No sound
...but doesn't still work...I uninstalled wine, deleted the .wine directory and re-installed but it didn't fix the problem.
These are details about my soundcard :
> cat /proc/asound/cards
> 0 [Phase88 ]: ICE1712 - TerraTec Phase88
> TerraTec Phase88 at 0xec00, irq 20
>
> aplay --list-devices
> **** List of PLAYBACK Hardware Devices ****
> card 0: Phase88 [TerraTec Phase88], device 0: ICE1712 multi [ICE1712 multi]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Phase88 [TerraTec Phase88], device 1: ICE1712 consumer [...
2010 Jul 09
2
Xen bridge no longer working
...G PROMISC MULTICAST MTU:1500 Metric:1
RX packets:98 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5880 (5.7 KiB) TX bytes:1234 (1.2 KiB)
Interrupt:17 Base address:0xec00
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet6 addr: fe80::260:97ff:fe20:464b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:94 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carri...
2003 Jun 12
1
NIC has IP, but has "no carrier"
Hello,
My computer is not connecting to the local network with the following
configuration:
dmesg.boot contains the following lines:
-----------------------------------------
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xec00-0xec7f mem
0xfeafbc00-0xfeafbc7f irq 11 at device 12.0 on pci2
vr0: Ethernet address: 00:40:05:a5:00:04
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ifconfig -a reports the following after b...
2005 Jun 05
7
Xen 3.0 Xend loses network - eth0 -> veth0?
...TU:1500 Metric:1
RX packets:807379 errors:0 dropped:0 overruns:0 frame:0
TX packets:680984 errors:0 dropped:0 overruns:0 carrier:0
collisions:174 txqueuelen:1000
RX bytes:800654135 (763.5 MiB) TX bytes:52893851 (50.4 MiB)
Interrupt:11 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0...
2005 Oct 10
2
AVM Fritz! + chan_capi + mISDN + PTP
...0000:00:14.0[A] -> GSI 10 (level, low) -> IRQ 10
mISDN_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:00:14.0
fritz card cd09a000 dch cd09a094 bch1 cd09a214 bch2 cd09a3a0
AVM PCI V2: stat 0x240020e
AVM PCI V2: Class E Rev 2
AVM PnP: HDLC version 2
mISDN: AVM Fritz!PCIv2 config irq:10 base:0xEC00
spin_lock_adr=cd09a024 now(d015b867)
busy_lock_adr=cd09a024 now(d015b867)
AVM PCI/PnP: reset
AVM PCI/PnP: S0/S1 40/2
Fritz1 ISAC STAR 40
Fritz1 ISAC MODE c0
Fritz1 ISAC ADF2 ff
Fritz1 ISAC ISTA 0
Fritz1 ISAC CIR0 7
mISDN_isac_init: ISACSX
Fritz1 HDLC 1 STA 82000000
Fritz1 HDLC 2 STA 82000000
AVM Fr...
2009 Apr 08
1
watchdog timeout
...og timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
xl1: watchdog timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
---------------------------------------------
xer:/root# cat /var/run/dmesg.boot | grep xl
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem
0xfceffc00-0xfceffc7f irq 23 at device 11.0 on pci2
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:e0:04:1b
xl1: <3Com 3c905C-TX Fast Etherlink XL>...
2008 Oct 18
4
SPORE with GF5900XT + Ubuntu 8.04
...t see any water and any creatures, I cannot see my cell :( so its imposible to play at all.
my system:
agp_aperture_size: 92
cpu: AMD Athlon(tm) 64 Processor 3000+
cpu_ghz: 2.00
distro: Ubuntu 8.04 hardy
kernel: 2.6.24-19-generic
machine_bitness: 32
memory: 1519
soundcard: VIA 8237 with VT1616i at 0xec00, irq 20
soundcard_driver: ALSA Version 1.0.16
videocard_direct: True
videocard_driver_version: 2.1.2 NVIDIA 173.14.12
videocard_manufacturer: NVIDIA Corporation
videocard_ram: 128
videocard_type: GeForce FX 5900XT/AGP/SSE2/3DNOW!
x_version: X.Org X Server 1.4.0.90
GUI version: 000133
any ideas???...
2007 Jun 22
0
Bug in initscripts? Problem with ifup-routes and alias device
...something or is it a bug in the ifup-routes script ?
-----------------
Output of ifconfig eth1:1 after "ifup eth1:1":
eth1:1 Link encap:Ethernet HWaddr 00:0E:0E:0E:68:8B
inet addr:10.1.2.3 Bcast:10.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Base address:0xec00 Memory:dffe0000-e0000000
----------------------
Best regards
T. Eichst?dt
2008 Mar 19
1
what is this address meaning?
...MULTICAST MTU:1500
Metric:1
RX packets:3944052 errors:0 dropped:0
overruns:0 frame:0
TX packets:4959117 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2610056956 (2.4 GiB) TX
bytes:4864161519 (4.5 GiB)
Base address:0xec00 Memory:fdc00000-fdc20000
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
2003 Aug 09
0
USB problems (I/O-Error => USB da(4) quirks, uscanner0)
...b0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdfffff00-0xdfffffff irq 11
at device 12.0 on pci0
rl0: Ethernet address: 00:50:fc:96:57:d3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller>...
2003 Apr 07
0
strange crash
...ntroller> port 0xe000-0xe00f at device 7.1 on
pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec00-0xec1f mem
0xd8000000-0xd80fffff,0xd8100000-0xd8100fff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:04:ac:a6:e7:3c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on is...
2004 Aug 20
1
some websites cant be reached
...1500 Metric:1
RX packets:14454729 errors:0 dropped:0 overruns:0 frame:0
TX packets:13063604 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:661069189 (630.4 Mb) TX bytes:1027129661 (979.5 Mb)
Interrupt:10 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:131511 errors:0 dropped:0 overruns:0 frame:0
TX packets:131511 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuel...
2005 Jul 31
1
Questions on Asterisk and CallerID
...'FCC'
Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
subvendor=b100
Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
ice 8.0 on pci2
Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
0xe159
Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
Jul 20 00:50:35 boldsoft kernel: Module 0...
2007 Mar 26
2
UPSilon 2000 via USB linux
...andwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
usb.c: USB device 2 (vend/prod 0x67b/0x2303) is not claimed by any active driver.
usb.c: registered new driver...
2005 Aug 02
0
Few questions about Asterisk
...'FCC'
Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
subvendor=b100
Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
ice 8.0 on pci2
Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
0xe159
Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
Jul 20 00:50:35 boldsoft kernel: Module 0...
2003 Sep 03
0
System hanging in acpi during shutdown
....0 on pci0
pci1: <PCI bus> on pcib1
drm0: <Matrox G550 (AGP)> mem 0xdf000000-0xdf7fffff,0xdfefc000-0xdfefffff,0xdc000000-0xddffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 10 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
puc0: <Oxford Semiconductor OX16PCI954 Dual UART> port 0xe400-0xe41f,0xe800-0xe81f mem 0xdfffe000-0xdfffefff,0xdffff000-0xdfffffff irq 10 at device 11.0 on pci0
sio2: type 16550A
sio3: type 16550A
sio4: type 165...
2010 Jan 29
7
with Xen4 config -> (pci-passthrough-strict-check no), DomU init reports "Error: pci: PCI Backend and pci-stub don''t own device"
testing,
uname -ri
2.6.33-rc5-4-xen x86_64
rpm -qa | grep -i Xen-4
xen-4.0.0_20873_01-29.1.x86_64
cat test.cfg
name = ''test''
builder = ''linux''
bootloader = ''/usr/lib/xen/boot/domUloader.py''
bootargs = ''--entry=xvda1:vmlinuz-xen,/boot/initrd-xen''
disk = [
2006 Apr 12
7
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
...cib0
agp0: <VIA 8380 host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA150 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8251 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at...
2002 Jan 18
2
Connection established, but no data transfer...
...0.89.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:338992 errors:0 dropped:0 overruns:1 frame:0
TX packets:15682 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0xec00
eth1 Link encap:Ethernet HWaddr 00:50:DA:B4:59:EE
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:79667 errors:0 dropped:0 overruns:0 frame:0
TX packets:6118 errors:0 dropp...
2007 Jul 09
2
ATA: abnormal status 0x7F on port 0xB887
...ufacturer: 'Cologne Chip AG' card name: 'HFC-4S
Digium
Card' clock: normal
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
GSI 20 sharing vector 0x62 and IRQ 20
ACPI: PCI Interrupt 0000:03:06.0[A] -> Link [LNEA] -> GSI 19 (level,
low)
-> IRQ 98
HFC-4S#1: defined at IOBASE 0xec00 IRQ 98 HZ 1000 leds-type 2
HFC_multi: resetting HFC with chip ID=0xc revision=1
Setting GPIOs
calling vpm_init
VPM: Chip 0: ver 33
VPM: A-law mode
VPM reg 0x20 is 11
NLP Thresh is set to 2 (0x2)
VPM: A-law mode
VPM reg 0x20 is 11
NLP Thresh is set to 2 (0x2)
rtc: lost some interrupts at 1024Hz.
hfc...