search for: 0xd0000000

...Device 0e23 (rev a1) Use dmesg to get the required ranges root@mercury:/opt/tmp/gfx_patchs_gtx-460-se-evga# dmesg | grep 01:00.0 | grep BAR [    2.481779] pci 0000:01:00.0: BAR 0: reserving [mem 0xf8000000-0xf9ffffff flags 0x40200] (d=0, p=0) [    2.481782] pci 0000:01:00.0: BAR 1: reserving [mem 0xd0000000-0xd7ffffff flags 0x14220c] (d=0, p=0) [    2.481784] pci 0000:01:00.0: BAR 3: reserving [mem 0xd8000000-0xdbffffff flags 0x14220c] (d=0, p=0) [    2.481787] pci 0000:01:00.0: BAR 5: reserving [io  0xe000-0xe07f flags 0x40101] (d=0, p=0) The 3 ranges [0xf8000000-0xf9fffff], [0xd0000000-0xd7ffffff]...

Hi, I have a GeForce4 MX 440 and a fresh 4.8-STABLE system. I have installed the NVIDIA drivers from the ports, everything went well but when the 'nvidia.ko' kernel module is loaded I got this message: nvidia0: <GeForce4 MX 440> mem 0xdda80000-0xddafffff,0xd0000000-0xd7ffffff,0xde0 00000-0xdeffffff irq 0 at device 0.0 on pci1 pci_cfgintr: can't route an interrupt to 1:0 INTA nvidia0: Interrupt handler setup failed. device_probe_and_attach: nvidia0 attach returned 22 I have tested my card under 4.7-STABLE, 4.8-STABLE and CURRENT and it is always the same...

...k @ 0x8ad6b000-0x8ad6e000 write-back @ 0x8ad9c000-0x8ad9d000 write-back @ 0x8adce000-0x8adcf000 write-back @ 0x8adcf000-0x8add0000 write-back @ 0x8adcf000-0x8add2000 write-back @ 0x8add3000-0x8add4000 write-back @ 0x8ae04000-0x8ae05000 write-back @ 0x8b208000-0x8b209000 write-combining @ 0xc0000000-0xd0000000 write-combining @ 0xd0000000-0xe0000000 write-combining @ 0xe0000000-0xe0040000 write-combining @ 0xe0040000-0xe0050000 write-combining @ 0xe0050000-0xe0051000 write-combining @ 0xe0051000-0xe0151000 write-combining @ 0xe0151000-0xe0191000 write-combining @ 0xe0191000-0xe01a1000 write-combining @ 0...

...tion (glxgears is very unresponsive). lspci reports: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) while Xorg.0.log reads: (--) PCI:*(0:2:0) Intel Corporation unknown chipset (0x0102) rev 9, Mem @ 0xe0c00000/22, 0xd0000000/28, I/O @ 0x3000/6 I've been searching for an rpm for adding the right driver with no success. Could anybody try to help me out, please? Thank you. Robi

...k @ 0x8ad9c000-0x8ad9d000 > write-back @ 0x8adce000-0x8adcf000 > write-back @ 0x8adcf000-0x8add0000 > write-back @ 0x8adcf000-0x8add2000 > write-back @ 0x8add3000-0x8add4000 > write-back @ 0x8ae04000-0x8ae05000 > write-back @ 0x8b208000-0x8b209000 > write-combining @ 0xc0000000-0xd0000000 > write-combining @ 0xd0000000-0xe0000000 > write-combining @ 0xe0000000-0xe0040000 > write-combining @ 0xe0040000-0xe0050000 > write-combining @ 0xe0050000-0xe0051000 > write-combining @ 0xe0051000-0xe0151000 > write-combining @ 0xe0151000-0xe0191000 > write-combining @ 0xe019...

...000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xe0007000 - 0xe0007fff (0x1000) MX[B] [1] -1 0 0xe0005000 - 0xe0005fff (0x1000) MX[B] [2] -1 0 0xe0003000 - 0xe0003fff (0x1000) MX[B] [3] -1 0 0xe0001000 - 0xe0001fff (0x1000) MX[B] [4] -1 0 0xc0101000 - 0xc01013ff (0x400...

....align 3 .LC0: .ascii "Hello World\000" .text .align 2 .globl main .set nomips16 .set nomicromips .ent main .type main, @function main: .frame $fp,48,$31 # vars= 16, regs= 3/0, args= 0, gp= 0 .mask 0xd0000000,-8 .fmask 0x00000000,0 .set noreorder .set nomacro daddiu $sp,$sp,-48 gssq $31,$fp,32($sp) sd $28,24($sp) move $fp,$sp lui $28,%hi(%neg(%gp_rel(main))) daddu $28,$28,$25 daddiu $28,$28,%lo(%neg(%gp_rel(main))) move...

...ntroller" Vendor: "Intel Corporation" Device: "Intel(r)Cantiga Graphics Controller" SubVendor: "Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS" SubDevice: Revision: "Hardware Version 0.0" Memory Size: 31 MB + 960 kB Memory Range: 0xd0000000-0xd1feffff (rw) Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 1280x800 (+2560), 16 bits Mode 0x0315: 1280x800 (+5120), 24 bits Mode 0x0301: 640x480 (+640), 8...

...a chip that may also be related to my problem : pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] Thanks in advance for your response. Best regards Eric Here more information : # dmesg |grep "01\:00\.0" [ 0.933105] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff] [ 0.933122] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.933139] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.933151] pci 0000:01:00.0: reg 24: [io 0x6000-0x607f] [ 0.933166] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xfffffff...

On Sat, Sep 1, 2018 at 3:12 AM, Bjorn Helgaas <helgaas at kernel.org> wrote: > If true, this sounds like some sort of erratum, so it would be good to > get some input from Intel, and I cc'd a few Intel folks. Yes, it would be great to get their input. > It's interesting that all the systems below are from Asus. That makes > me think there's some BIOS or SMM

Hi all, I recently bought a Intel D2500HN motherboard with Intel GMA 3600 video card. I want to install FreeBSD 9-Release on it via PXE, but after booting the system, it seems that video card driver doesn't work properly. Have a look at this picture: http://img703.imageshack.us/img703/5648/20120714393.jpg I've tried the # vidcontrol 80x25 but unfortunately it doesn't help. Do

...00000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] TOM2: 000000022f000000 aka 8944M > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved > [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at > [ffff8800000ff780] > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] Base...

...07f]. Bus 1, device 0, function 0: VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440-SE] (rev 163). IRQ 16. Master Capable. Latency=32. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff]. Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. Prefetchable 32 bit memory at 0xd8000000 [0xd807ffff]. ---------------------------------------------------------------------------/

...ext >> .align 2 >> .globl main >> .set nomips16 >> .set nomicromips >> .ent main >> .type main, @function >> main: >> .frame $fp,48,$31 # vars= 16, regs= 3/0, args= 0, gp= 0 >> .mask 0xd0000000,-8 >> .fmask 0x00000000,0 >> .set noreorder >> .set nomacro >> daddiu $sp,$sp,-48 >> gssq $31,$fp,32($sp) >> sd $28,24($sp) >> move $fp,$sp >> lui $28,%hi(%neg(%gp_rel(main))) >> daddu...

HI all, I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based notebook with i915 graphic chipset). I am trying to use the latest drm hook for i915, but I get this error: drmsub0: <Intel i915GM> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or

Dear David Techer, I have read through your article on Xen VGA passthrough on http://www.davidgis.fr. It appears that the following command on your blog doesn''t work. dmesg | grep 01:00.0 | grep BAR The above command shows nothing at all. Is there an alternative solution? Thank you very much. Yours sincerely, Teo En Ming (Zhang Enming)

...7 disabled [ 0.003537] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003690] total RAM covered: 8192M [ 0.004410] Found optimal setting for mtrr clean up [ 0.004412] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G [ 0.004861] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.004867] last_pfn = 0xcf65f max_arch_pfn = 0x400000000 [ 0.007191] found SMP MP-table at [mem 0x000f22d0-0x000f22df] [ 0.007279] check: Scanning 1 areas for low memory corruption [ 0.007287] BRK [0x90601000, 0x90601fff] PGTABLE [ 0.007290] BRK [0...

...x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x30000000 - 0x300fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:8:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xd8000000...

...0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000022f000000 aka 8944M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [fff...

...12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci2: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci1: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd0000000-0xd7ffffff,0xd9000000-0xd900ffff irq 18 at device 0.0 on pci1 vgapci1: <VGA-compatible display> mem 0xd9010000-0xd901ffff at device 0.1 on pci1 acpi_tz0: <Thermal Zone> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 no...